Palit N68s problems

[Sghero]

wow siao.

i got 1 plait n68s suddenly got no signal to lcd. thought it was mine 8600gt spoil but after pluging to mobo VGA & dvi still no out put. all the fans are still moving but no bios screen.
any solution? Its 26dec fri right u guys open for work 2day?
i will try to remove everything & put back including cmos batt hopes it works.

[Sghero]

wow i remove everything except cpu cos no more paste left. then put everything back 2gether. at first cannot work with then i remove the ram leave 1 g out. then can start. maybe the ram slot faulty. hey guys got any solution. now using only 1 g ram. now the tem reading for the amd x2 5000be also very low way to low man funny. working with open casing hope dun explode. lol

[Convergent_Tech]

wow i remove everything except cpu cos no more paste left. then put everything back 2gether. at first cannot work with then i remove the ram leave 1 g out. then can start. maybe the ram slot faulty. hey guys got any solution. now using only 1 g ram. now the tem reading for the amd x2 5000be also very low way to low man funny. working with open casing hope dun explode. lol

Try the rams one stick at a time, maybe one stick ram faulty.

peAce

[batuchka]

Dun worry about the x2 5000 BE temps IIRC these chips got whacked temp sensor

[Sghero]

change ram laio. both rams can work 1with 1 slot only. maybe other dusty or wad. anyway plait n68s cannot support 2gb ram right?can flash the bios to newer 1? it can support 8800gt right. howabout4850

[Convergent_Tech]

change ram laio. both rams can work 1with 1 slot only. maybe other dusty or wad. anyway plait n68s cannot support 2gb ram right?can flash the bios to newer 1? it can support 8800gt right. howabout4850

Bring down the board for testing / possible replacement.

[Sghero]

hey i finally got the second slot working. didnt do know how. any way i just unplug the power plug & remove the mobo batt for 3hours reasamble everything & it working again. not going to touch anything else man since it working. Thanks for the help any way.

[batuchka]

Haha that is called clearing CMOS - glad to know it worked out for ya

[batuchka]

Hmm just to check Palit N68S supports 2 x 2 GB in dual channel right with latest BIOS?

[Convergent_Tech]

Hmm just to check Palit N68S supports 2 x 2 GB in dual channel right with latest BIOS?

yeap..former bios also supports 2x2gb.

[lamesensei]

hi sorry for diggin this thread; but have to double confirm, this mobo bios v1.22 can support 4gb ram in total?

[buaysaikum]

sorry for digging this thread.
I've a BIG problem with my 9 mths old palit n68s.

PC will auto reset after some time, then after that cannot boot into windows. when i check the bios PC health management, the temperature is only like 50degrees.
sometimes it will just hang there in black screen when booting up, no beeps no nothing, fan spinning, no burnt smell, nothing...

http://forums.hardwarezone.com.sg/showthread.php?t=2402365

any experts can help?

thanks!~

[Convergent_Tech]

sorry for digging this thread.
I've a BIG problem with my 9 mths old palit n68s.

PC will auto reset after some time, then after that cannot boot into windows. when i check the bios PC health management, the temperature is only like 50degrees.
sometimes it will just hang there in black screen when booting up, no beeps no nothing, fan spinning, no burnt smell, nothing...

http://forums.hardwarezone.com.sg/showthread.php?t=2402365

any experts can help?

thanks!~

Please try with another PSU & ram modules

[batuchka]

Hmm if u meant BIOS auto reset can try this cheap approach: change mobo battery?