problem with buffalo wcr-g54

[go5]

however i face d a problem connectioni to internet..


all cable r rite leh..
but i let it self-detect for internet connection but it doesn't work.=(
dun know y.=)..
wat is PPPoE connection..
using maxonline should auto-detect rite?..
sori noob here

[cpuer]

PPPoE is for ADSL. For your case you just do a hard reset to it. It will allow you to go online the wired way. If you want to use wireless, you need to set up the SSID and security by its webgui via 192.168.11.1

Don't make use of any funky CD or wizards, they create confusion and troubles more than they can help you setting up the router.

[surefire888]

PPPoE is for ADSL. For your case you just do a hard reset to it. It will allow you to go online the wired way. If you want to use wireless, you need to set up the SSID and security by its webgui via 192.168.11.1

Don't make use of any funky CD or wizards, they create confusion and troubles more than they can help you setting up the router.

shouldn't that be 192.168.1.1?

To the OP, make sure you get it to work on a direct, wired connection first. You won't have to worry about entering WEP/WPA etc. You need to switch off the modem before connecting the router.

[cpuer]

shouldn't that be 192.168.1.1?

To the OP, make sure you get it to work on a direct, wired connection first. You won't have to worry about entering WEP/WPA etc. You need to switch off the modem before connecting the router.

The hard reset should point it back to the factory default 192.168.11.1

http://www.buffalotech.com/files/downloads/WHR-G54S-Manual-v1.7-web.pdf

Anyway, TS model is WCR-G54, and I was referring to WHR-G54S, sorry TS, wrong model I was referring to.

[cpuer]

Here's an user review of the WCR :

http://www.bncxe.org/showthread.php?t=33649