Dlink DIR655 weird problem

[converse2010]

Hey guys, just starting of this week, my DIR655 suddenly lose most of the signal to my other room whereby previously it was ard 4bar, now drop till 1bar or even no connection.

any idea what's wrong ?

[theView]

Hey guys, just starting of this week, my DIR655 suddenly lose most of the signal to my other room whereby previously it was ard 4bar, now drop till 1bar or even no connection.

any idea what's wrong ?

Dlink stuff are like that

it works on the first lap
that it doesn't on the second lap

reset the configuration to default and see whether it works again with a stronger signal

if not
"exchannge" a new one

[richneo]

Try changing to another wireless channel. There could have channel interference from nearby.

[converse2010]

I tried changing to another channel for once, still nt much diff, reset default, still the same thus restore back the settings..

Any proggy to scan what channel my neighbour are using ? Cos my neighbour's signal is fullbar whereby mine is jus 1bar or 2 :(

[MrJacky]

Doesn't D-Link products have limited lifetime warranty?

[converse2010]

So i can call D-Link and ask them for an exchange of the DIR655 ?

[tromba]

yes u can
for 20 char

[ry0suk1]

try call them and ask

[VodkaDevil]

have you try to reflash the firmware? try to get the latest firmware from D-Link singapore website, make sure your maid never unscrew your antenna while cleaning your room hahahah happen once to me before huahahaha, also changing channel can be one of the option, because your neighbour might just get a new AP or Router which causing interference,try to switch off the auto scan channel and try the channel by channel, see if this help :)

[Pokémon]

If you're still using the default SSID (dlink), consider changing to something unique instead.

[iCuteCube]

best option is to change channel to test it....
If not you might want to try resetting the router and flash it to the latest firmware.

After you have done so, do testing again, make sure you done your wireless security settings (wpa/wep..etc)

[nightkids86]

i experience b4 something like that ..
my router jus above me then my wireless connection still onli 1bar ..

the reason i found out is bcoz my Cordless Phone too near to router ..
once remove away .. even like 3wall in btw connection still can up to 4bar

[converse2010]

Firmware already latest, cordless phone off and cordless phone base station also off but still the same..

[chaozhouzi]

No use calling them. Read my post here: http://forums.hardwarezone.com.sg/showthread.php?p=37951824&posted=1#post37951824

They are no help. You will get better help from members here.

[chaozhouzi]

Maybe can try moving away your cordless phone and base station even though they are off. See if it help. The router and phone both uses same frequency 2.4Ghz. Though phone off, it may still interfere?