Help for Setting Up Singnet BB with SpeedTouch ADSL2 536 Gateway and Linksys Wireless Router

[slidder]

Set up Linksys Router with below settings:

Connection type: PPoe
username: xxx @ singnetnet.com.sg
password: xxxxxx

Domain name: singnet.com.sg

Static DNS 1: 165.21.100.88
Static DNS 2: 165.21.83.88

All other setting under factory default.

I tried using bridge connection (means connect modem to LAN port) as well as router connection (connect modem to WAN port) but also cannot.

But once I connect PC to modem (w/o router), it works perfectly.

Anyone know hw to configure ? Please help.

[cpuer]

You have to bridge the modem. and also your username should be username@singnet, not username@singnet.com.sg, check your singnet letter.

Follow this step by step guide to bridge the modem via telnet.

http://cid-e1e79503b9baf0e0.skydrive.live.com/self.aspx/.Public/Bridge|_ST536v6.txt

[slidder]

You have to bridge the modem. and also your username should be username@singnet, not username@singnet.com.sg, check your singnet letter.

Follow this step by step guide to bridge the modem via telnet.

http://cid-e1e79503b9baf0e0.skydrive.live.com/self.aspx/.Public/Bridge|_ST536v6.txt

At the last step after the above guide, wat is the actual connection?

Do I have to reboot the modem and follow the connection as below:

1.) Connect the PC and the modem to the LAN port of the Linksys router and enable DHCP server in the linksys router setting ?

Please enlighten.

[cpuer]

At the last step after the above guide, wat is the actual connection?

Do I have to reboot the modem and follow the connection as below:

1.) Connect the PC and the modem to the LAN port of the Linksys router and enable DHCP server in the linksys router setting ?

Please enlighten.

The last 2 lines of the guide are:

Administrator}=>exit
Connection to host lost.

Thereafater:

• After done the bridge setting, Unplug the LAN cable from your computer and connect to your router Internet Port.

ST Modem -> Router -> PC

===========================

I have forgotten if I did the restart of the modem or not. But i don't think it will make any difference or harm if you do it or not. Only thing you shouldn't do is to reset it by poking the RESET hole. It will revert the modem back to the router mode.

[slidder]

Does it means that PC and modem are both connected to the router LAN port ?

Any setting on the router ?