Mio 2Wire Cannot change wifi channel

[TheWizzy]

dear sexpert,

i tried to change the wireless channel to any channel, however my wireless network seems to be stuck at channel 1

http://img518.imageshack.us/img518/1713/wifih.th.jpg (http://img518.imageshack.us/i/wifih.jpg/)

please help...

[TheWizzy]

I have tried to restart the router via web, no change

I also tried to on/off the router, no change as well...

[wild_ocelot]

http://img518.imageshack.us/img518/1713/wifih.jpg

i dun seem to have any prob. with my 2wire modem... i just tried a couple a times for you... after i click save, i refresh the page than the side display also change...

maybe you wanna call singnet???

[TheWizzy]

i manage to change the settings from channel 6 to 11
how ever the problem still remain...

i ping 192.168.1.254 (router IP) every 15 to 20 secs i got spike :
Reply from 192.168.1.254: bytes=32 time=2ms TTL=255
Reply from 192.168.1.254: bytes=32 time=2ms TTL=255
Reply from 192.168.1.254: bytes=32 time=2ms TTL=255
Reply from 192.168.1.254: bytes=32 time=1ms TTL=255
Reply from 192.168.1.254: bytes=32 time=1ms TTL=255
Reply from 192.168.1.254: bytes=32 time=5ms TTL=255
Reply from 192.168.1.254: bytes=32 time=1804ms TTL=255
Reply from 192.168.1.254: bytes=32 time=2ms TTL=255
Reply from 192.168.1.254: bytes=32 time=3ms TTL=255
Reply from 192.168.1.254: bytes=32 time=2ms TTL=255
Reply from 192.168.1.254: bytes=32 time=2ms TTL=255
Reply from 192.168.1.254: bytes=32 time=2ms TTL=255
Reply from 192.168.1.254: bytes=32 time=1ms TTL=255
Reply from 192.168.1.254: bytes=32 time=2ms TTL=255
Reply from 192.168.1.254: bytes=32 time=1ms TTL=255
Reply from 192.168.1.254: bytes=32 time=2ms TTL=255
Reply from 192.168.1.254: bytes=32 time=2ms TTL=255
Reply from 192.168.1.254: bytes=32 time=4ms TTL=255
Reply from 192.168.1.254: bytes=32 time<1ms TTL=255
Reply from 192.168.1.254: bytes=32 time=9ms TTL=255
Reply from 192.168.1.254: bytes=32 time=9ms TTL=255
Reply from 192.168.1.254: bytes=32 time=3ms TTL=255
Reply from 192.168.1.254: bytes=32 time=4ms TTL=255

Anything that i can do ?

[TheWizzy]

Seems that it's due to Vista problem, steps below solve my issue
A) Get to the command prompt (Start -> Type: cmd.exe -> Enter)
B) Type: netsh wlan show interfaces and look under Name. This is the Interface Name.
C) Type: netsh wlan set autoconfig enabled=no interface="Interface Name Here"

Taken from other forums.