View Single Post
Old 10-07-2016, 12:10 PM   #8115
jaydentk
Member
 
Join Date: Jan 2011
Posts: 459
Ouch...

Will prefer Daikin if not for the cost.

Was provided the quote of $2950 with 2 12k Fancoil and a system 3 compressor.

I keep on asking the saleman which brand is better and always gotten the model answer.

"Electronic heng sway one leh. No such thing as which brand is better."

If you like starmex then starmex better lor, Daikin then daiken better...

Listen until i know how to repeat liao.

the two guys from GC who installed my sys 3 were quite good with the pipings/trunking, only issue was the drilling part, and not sure if the blame was on them or should i blame the precaster of the wall. supposed to drill a 3" x 2", but the end results was like rifle gunshot wound , the side where they drilled from, was a nicely done 3"x 2" hole, but on the other side . I heard the guy who drilled the wall cursing "diu"

also the clearance between top of aircon and ceiling, out of 3 fancoils, only 1 has the recommended 200mm clearance. seems like most of the installers go by the rule of thumb of 3".

lesson learnt, next time should really go thru the installation manual that comes with the fancoil before installation starts to ensure the brand/model specific requirements are captured.

Guess it is really heng suay.
jaydentk is offline