My resale HDB 4 room renovation in Modern and Transitional design with cozy ambience

[Alphas]

Sent........

 

[Alphas]

If someone need a good Electrician to do the kind of dual warm white and RGB led lights, drop me a PM. He is experienced and give affordable quote.

 

[Alphas]

Next update will be on the sliding barn door with glass windows and cove light false ceiling. The carpenter had started on the sliding door and wooden frame. He was making measurement and installing it. But there was an issue with the sliding door and he had to bring it back to correct it.

Next was the curved shaped design false ceiling. The electrical wirings were done and the two hanging wires are for ceiling speaker wires. PD door on the wall is from the storeroom and was taken off since the kitchen/storeroom floors were hacked and tiled. The curved shaped false ceiling required curved panels so this had to be done separately.

Getting there, soon!

 

[mun_hoe]

camping for updates.

Hafary tiles are atas budget level

 

[meifenn]

Hello guys!

We are an interior design firm with 17 years of experience.
We cannot guarantee that we have the lowest price, but we can guarantee to you that we have top notch after sales services.
Do PM me for more info or contact me at 8332 9514.

 

[Alphas]

Alright, it is update time and there are two updates. The carpenter worked on the remaining cabinets, the kitchen sink, hood and hobs are installed. He also installed the dish rack cabinet door with Blum HL hinges, and it slide upwards nicely.

Then the Electrician came to complete the electrical works. There are 2 PIR sensors warm white LED strips on both top and bottom cabinets. When a person comes close, the LED will light up to provide lighting. I will also add 2 natural white worklights under the top cabinets, but these are not mounted yet. The automatic laundry rack is mounted and I got it tested. Finally the Lian Hin "winter" table top is mounted and installed after all the switches and sockets were tested, don't you just love the design and layout.

What about the living room RGB/warm white cove lights and sliding door?

 

[Alphas]

2nd update, yeah! I bought the black door handle bar for the carpenter and got it mounted. The sliding door issue had been corrected and the carpenter got it installed. The sliding door comes with soft closing and will slow down as it closes. Next was the curved shaped false ceiling, the curved portion was completed and also the cut out for the curtains. Then the electrician mounted the dual spot light housings and the RGB/warm white led strips with the LED controller. Time to test it.

For the UST Wemax projector update, please refer to my thread here.
Really looks cool … More updates are coming up.

 

[TheBaldMan]

Alright, it is update time and there are two updates. The carpenter worked on the remaining cabinets, the kitchen sink, hood and hobs are installed. He also installed the dish rack cabinet door with Blum HL hinges, and it slide upwards nicely.

Then the Electrician came to complete the electrical works. There are 2 PIR sensors warm white LED strips on both top and bottom cabinets. When a person comes close, the LED will light up to provide lighting. I will also add 2 natural white worklights under the top cabinets, but these are not mounted yet. The automatic laundry rack is mounted and I got it tested. Finally the Lian Hin "winter" table top is mounted and installed after all the switches and sockets were tested, don't you just love the design and layout.

What about the living room RGB/warm white cove lights and sliding door?

Good idea abt the work lights.Do share on it.After considering your slide up for the drying rack,i find it better then the fold up one i am hving.But the thing is i paid for the blume hinges and replacing them again not sure if it will be costly for blumes again.

 

[Alphas]

I demo the Blum HL in the next update.

 

[Alphas]

How do u plan your house lighting?
Want to get some opinion and idea.
Do u have any picture for reference?

Sorry missed your post, the explanations are in the updates.

 

[jtec14]

very nice place!

 

[DavidSoh138]

Interior Design

Hi everyone, I was browsing around and I saw that a lot of you guys are here asking about home renovation.

I'm a Interior Designer myself and if you are still looking for a ID, feel free to give me a PM and I will be happy to guide you along in your home renovation to achieve your dream home!

Cheers!!

 

[Alphas]

Its Friday and there is new update in videos. So what do I have show, well its the dish rack cabinet with Blum HL hinge door, the cabinet PIR backlights and work lights with touch sensor!

The width of the dish rack cabinet is 890mm and the door is rather large. However, the HL hinge make it quite easy to open and slide upwards. It could hold its half open position and remain stationary. The door slide upwards and almost reaches to the ceiling, so the whole rack can be access easily without the door protruding outwards.

Next is the PIR sensors, when the person is within range, the sensors will activate and the backlights will light up for a duration (can be adjusted) and then turn off. The work lights are touch activated and provide general natural white lightings to the table top.

Want to see more, stay on for the next update....

 

[TheBaldMan]

Its Friday and there is new update in videos. So what do I have show, well its the dish rack cabinet with Blum HL hinge door, the cabinet PIR backlights and work lights with touch sensor!

The width of the dish rack cabinet is 890mm and the door is rather large. However, the HL hinge make it quite easy to open and slide upwards. It could hold its half open position and remain stationary. The door slide upwards and almost reaches to the ceiling, so the whole rack can be access easily without the door protruding outwards.

Next is the PIR sensors, when the person is within range, the sensors will activate and the backlights will light up for a duration (can be adjusted) and then turn off. The work lights are touch activated and provide general natural white lightings to the table top.

Want to see more, stay on for the next update....

Very nice.I like the touch activated lights.Its wired or just plug and play?Wonder if i can do that still.

The hinges do u know the cost?After a while i find the push up is more feasible then the current pull open door.

 

[Alphas]

Very nice.I like the touch activated lights.Its wired or just plug and play?Wonder if i can do that still.

The hinges do u know the cost?After a while i find the push up is more feasible then the current pull open door.

The touch activated lights are ready made plug and play, just connect it to 12V transformer and it will work. See the three gang switches on the right, these are the transformers switches for the cabinet backlight, work light and hood.

Blum HL was already factored in the cabinets cost, maybe can just contact Blum to ask them.

 

[evolute8]

Bookmarked.

 

[TheBaldMan]

The touch activated lights are ready made plug and play, just connect it to 12V transformer and it will work. See the three gang switches on the right, these are the transformers switches for the cabinet backlight, work light and hood.

Blum HL was already factored in the cabinets cost, maybe can just contact Blum to ask them.

Can i know where can i source for the touch lights?

 

[Alphas]

Touch activated worklights

PIR sensors with and w/o light sensor

 

[TheBaldMan]

Touch activated worklights

PIR sensors with and w/o light sensor

Tq!Hopefully there is someway to rewire without affecting the carpentery.

 

[Alphas]

Alright it is time for another update. The sliding barn door is completed and the soft closing mechanism is tested in the video (ignore the carton boxes as I was still clearing the items)

How about more? Yes, the update on the kitchen cabinets is next!