Thread: Android TV Box
View Single Post
Old 17-06-2019, 11:49 AM   #2114
gregory_choo
Supremacy Member
 
gregory_choo's Avatar
 
Join Date: Nov 2007
Posts: 5,141


I followed this guide https://androidpctv.com/firmware-upd...x-soc-amlogic/ and created both the USB thumb drive and microSD card using an .img file (http://geekbuying.mediafire.com/file...90221.img/file) using Burn Card Maker. It says keep the flash mode button (reset button) pressed but it always end up booting into recovery instead of flashing.
your androidpctv site has good and complete instructions to guide you, I suggest you go through the steps again.

if using sdcard, try to get card with small capacity. If you can't boot from the card, you have to try it again by formating it first, using sd formatter from sd association

https://www.sdcard.org/downloads/formatter/

if using thumbdrive, try with different usb ports.

if using usb cable, try to use older windows, best with win XP, should work on win7 too. Remember to try it on different usb ports, if you box has more than one usb port.

if you can't find laptop with old windows, read the note on the androidpctv page about the tweaks you need for win10.

last resort is to use method 3 [FLASH FIRMWARE WITH UBOOT.BIN FILE]

Last edited by gregory_choo; 17-06-2019 at 12:10 PM..
gregory_choo is offline   Reply With Quote