View Single Post
Old 15-07-2019, 12:53 PM   #1
Junior Member
alwaysbadboy's Avatar
Join Date: Jan 2011
Posts: 32
Thumbs up Singtel HG8244H change to Bridge Mode

There are two software versions based on my findings.

1: Software version: V3R017C00S100
for this one, You may follow below post

2: Software version: V3R018C00S100
for this one, the vendor removed "WAN Configuration" and add in "Mode switching" under the Maintenance tab.
Connect your laptop directly to Singtel ONR and manually set your IP address to
Browse to

Username: support

1: Enable DHCP relay under LAN configuration
2: Advance Configuration -> Maintenance -> Mode switching ->Bridge

The device will auto-restart once the Apply button pressed.

Connect your ASUS router WAN to ONR LAN port
During the setup wizard, please choose "special requirement from ISP"
Then choose "Singtel-MIO" regardless of your plan ie you didn't sign up for MIO TV

Okay, all done, now your ASUS router act as the main router, DDNS, and port forwarding run as per normal.

You will need a VLAN 10 for WAN port in order to get DHCP works on 3rd party router if they don't have a built-in function like Asus.
VLAN 20 for Mio-TV
VLAN 30 for Voice

enjoy ~~~~
Nothing here

Last edited by alwaysbadboy; 17-08-2019 at 01:02 PM..
alwaysbadboy is offline   Reply With Quote