View Single Post
Old 26-11-2010, 11:10 PM   #15
electrica
Junior Member
 
Join Date: Nov 2010
Posts: 29
To all Aztech HL110EW users,

A new firmware has been released to our ftp server today 3rd June 2010. The address link for the download of the new firmware can be located at :

FIRMWARE UPGRADE INSTRUCTION

1. Download the latest firmware from the following ftp link

2. Firmware will include 3 files

Homeplug AV Configuration filename : 206.2.4-01.pib

Homeplug AV Firmware filename : int6000-v4.01-0-1-B-FINAL.nvm

Wireless Firmware filename : 219.2.2-001.img

3. Save these 3 files into 1 folder to where you can easily locate during the FIRMWARE upgrade

4. Connect the device to the computer where you are using the HomePlug AV Wireless N Extender utility

5. Open HomePlug AV Wireless N Extender utility v4.01.58

6. Under Firmware Upgrade tab click "Upgrade" button. You will be prompted to select the location of the latest firmware

7. After you select the location of the latest firmware, the upgrade will immediately start.

8. During Firmware Upgrade DO NOT turn OFF or RESET the device.

9. When process is complete the unit will reboot.

10. Hit the reset button for 3 seconds to reset to factory default settings.

Fixes

The new firmware resolves the IP address conflict with 192.168.1.1 networks

Aztech HQ
Not sure how many of you actually tried this but it didn't work for me. The ftp link provided leads to an older firmware version v_201.2.4-01_219.2.2-001 and not the newer one v_201.2.4-01_219.2.2-002. Also, in the last step of his instructions, Aztech HQ said to and I quote "10. Hit the reset button for 3 seconds to reset to factory default settings". In the instructions found on the Aztech website, this step is not there. Anyway, I tried both and neither worked. The minute HL110EW is turned on, any pc connected directly to my router goes offline. This is frustrating.
electrica is offline   Reply With Quote