View Single Post
Old 20-04-2015, 04:34 PM   #5722
kimsim
Suspended
 
Join Date: Nov 2008
Posts: 1,690
HI guys,

I tried to clean my air con previously, and while i did it without dismantling much, i thought it will be easier to dismantle the blower and remove it so cleaning can be a breeze. The blower was FILLED with thick black dust that no air was coming out back then. After clearing the dust, i was amazed by how much air was coming out.


If you noticed the numbering, 1 is where there are screws, after unscrew, the blower can be tilted downwards abit to do cleaning. The right side (number 2) cannot be unscrewed as i need to remove the motor first. I am worried that i cannot fix it back or damage the cables if i did not handle it properly.

Sorry for the quality of pic and small number.

Any experts have similar air con and can advice?
Mine to share what is the model & brand?
At the right hand end blower did miss slide gap?
If yes then use screw driver for slot in and unscrew out, if inside can't see any screw at all..

Option 2 have to remove fan motor with cooling coil lift up then can see the screw at below of PCB panel.
kimsim is offline