www.hardwarezone.com.sg


www.hardwarezone.com.sg (/)
-   Cars & Cars (https://forums.hardwarezone.com.sg/cars-cars-204/)
-   -   Honda Fit/Jazz Part 2 (https://forums.hardwarezone.com.sg/cars-cars-204/honda-fit-jazz-part-2-a-5908121.html)

Orphan 13-05-2019 02:27 PM

Quote:

Originally Posted by veryhonestguy (Post 120759927)
Yup for parking mode choose the energy saving mode
https://i.imgur.com/UYeMOY4.jpg

Note that energy saving mode on the F800 activates only upon impact (+5 secs before and after). Check your sensitivity to see if you are happy with it. Try closing your door normally and then hard enuf to make the car tilt a bit to see how much force is required to trigger.
Ppl open door and scratch your car may not trigger.

bh10101 13-05-2019 02:36 PM

Quote:

Originally Posted by veryhonestguy (Post 120760088)
It different setting , for parking there is motion , time lapse and energy saving , for driving there is other option

am using iRoad v9s2 2ch (default from KM).
Under the Event Filter option, Impact (medium), Parking (medium) & Motion Detection (medium) are turned on.

not sure whether Parking and Motion Detection are required :s11:

veryhonestguy 13-05-2019 02:42 PM

Hmm what I read is , it is in sleeping mode , and will activate only upon impact and record for the next 20 second

Quote:

Originally Posted by Orphan (Post 120760124)
Note that energy saving mode on the F800 activates only upon impact (+5 secs before and after). Check your sensitivity to see if you are happy with it. Try closing your door normally and then hard enuf to make the car tilt a bit to see how much force is required to trigger.
Ppl open door and scratch your car may not trigger.


veryhonestguy 13-05-2019 02:50 PM

Motion is not good at all for high traffic of ppl or car park .
I test it before and basically is like recording non stop

Quote:

Originally Posted by bh10101 (Post 120760261)
am using iRoad v9s2 2ch (default from KM).
Under the Event Filter option, Impact (medium), Parking (medium) & Motion Detection (medium) are turned on.

not sure whether Parking and Motion Detection are required :s11:


Orphan 13-05-2019 02:57 PM

Quote:

Originally Posted by veryhonestguy (Post 120760359)
Hmm what I read is , it is in sleeping mode , and will activate only upon impact and record for the next 20 second




My bad, you are right. It only wakes up upon impact (with less than 1 sec delay) and start recording for the next 20 secs.


Is that good enough for your requirements?

veryhonestguy 13-05-2019 03:08 PM

Actually I had tried , it record when things are really near it , I test it by walking around my car bonnet and it is recorded

Quote:

Originally Posted by Orphan (Post 120760607)
My bad, you are right. It only wakes up upon impact (with less than 1 sec delay) and start recording for the next 20 secs.


Is that good enough for your requirements?


Orphan 13-05-2019 03:31 PM

Quote:

Originally Posted by veryhonestguy (Post 120760793)
Actually I had tried , it record when things are really near it , I test it by walking around my car bonnet and it is recorded


If it can record when got something near instead of only after impact, then that's very good leh.

veryhonestguy 13-05-2019 03:48 PM

Ya I scare can’t record then defeat purpose

Quote:

Originally Posted by Orphan (Post 120761126)
If it can record when got something near instead of only after impact, then that's very good leh.


bh10101 13-05-2019 04:02 PM

Quote:

Originally Posted by veryhonestguy (Post 120761419)
Ya I scare can’t record then defeat purpose

thats what happen recently to my iRoad dash cam.
it prompt "something in parking mode" after the dash cam is power on for 5mins.
never happen before and only record 5mins of normal events of each new ride.
was resolved by changing fuse cable or something fuse of fuse cable

veryhonestguy 13-05-2019 04:10 PM

1 thing I like about f800 is u though the camera is always sleeping as it will not blink

Quote:

Originally Posted by bh10101 (Post 120761628)
thats what happen recently to my iRoad dash cam.
it prompt "something in parking mode" after the dash cam is power on for 5mins.
never happen before and only record 5mins of normal events of each new ride.
was resolved by changing fuse cable.


bh10101 13-05-2019 04:13 PM

Quote:

Originally Posted by veryhonestguy (Post 120761740)
1 thing I like about f800 is u though the camera is always sleeping as it will not blink

issnt defeating the purpose? must blink to show is constantly monitoring :s13:

Orphan 13-05-2019 04:23 PM

I like mine blinking also.
A bit of extra deterrent.

veryhonestguy 13-05-2019 04:35 PM

Some times u go see parking mode video can see a lot of funny thing 1

Quote:

Originally Posted by bh10101 (Post 120761789)
issnt defeating the purpose? must blink to show is constantly monitoring :s13:


bh10101 13-05-2019 04:55 PM

Quote:

Originally Posted by veryhonestguy (Post 120762145)
Some times u go see parking mode video can see a lot of funny thing 1

show la.. interested what your cam capture :s13:
must be funny hor :P

veryhonestguy 13-05-2019 04:57 PM

Haha can’t but funniest I saw is 2 guys stand in front of my car pointing here and there and keep pointing at the car cam , think they are debating if that cam is working anot

Quote:

Originally Posted by bh10101 (Post 120762514)
show la.. interested what your cam capture :s13:
must be funny hor :P



All times are GMT +8. The time now is 11:11 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright © SPH Magazines Pte Ltd. All rights reserved.