www.hardwarezone.com.sg

Show 50 post(s) from this thread on one page

www.hardwarezone.com.sg (/)
-   Hardware Clinic (https://forums.hardwarezone.com.sg/hardware-clinic-2/)
-   -   The AMD Zen2 Ryzen 3000 Discussion Thread (https://forums.hardwarezone.com.sg/hardware-clinic-2/amd-zen2-ryzen-3000-discussion-thread-6079836.html)

Pepperisk 18-07-2019 10:08 AM
Bought the 3600. Pairing it with my old motherboard ( B350 tomahawk ) and so far it runs. Having some issues with video playback though. If I put the computer to sleep, then turn back on, can't play any videos on any browser. Youtube/twitch etc will load the picture but the video won't play. Restarting the computer will fix it. No clue why.

Also waiting for the ballistix ram to test. Hope it works out well.

MacClipper 18-07-2019 10:52 AM
Quote:
Originally Posted by Shahmatt (Post 121792608)
Micron B-die
Nice job in o'cing these! :)

curryloti 18-07-2019 11:15 AM
Quote:
Originally Posted by Shutterbox (Post 121794576)
My only problem with b450 boards is the lack of more m.2 pcie slots.

X570 has at least 2
Only problem?

https://www.techpowerup.com/257201/b...bility-promise

Quote:
motherboards based on AMD 300-series and 400-series chipsets... the capacity of the SPI flash EEPROM chip that stores the motherboard UEFI firmware is woefully limited to cram in the AGESA ComboAM4 1.0.0.3a microcode on many of its motherboards.

Shahmatt 18-07-2019 12:57 PM
Quote:
Originally Posted by MacClipper (Post 121796436)
Nice job in o'cing these! :)
Thanks. It's possible to do better I think if you want to try up to 1.40V, but I felt scared to try.

Also I believe these RAMs are not expensive.

Edit: Actually I just found old record showing I did push these to 1.43V (forgot I tried) and achieved 3400 CL14.

tigerwoods 18-07-2019 09:08 PM
Quote:
Originally Posted by Pepperisk (Post 121795645)
Bought the 3600. Pairing it with my old motherboard ( B350 tomahawk ) and so far it runs. Having some issues with video playback though. If I put the computer to sleep, then turn back on, can't play any videos on any browser. Youtube/twitch etc will load the picture but the video won't play. Restarting the computer will fix it. No clue why.

Also waiting for the ballistix ram to test. Hope it works out well.
updated your bios?

5star_pundit 18-07-2019 09:25 PM
Quote:
Originally Posted by Pepperisk (Post 121795645)
Bought the 3600. Pairing it with my old motherboard ( B350 tomahawk ) and so far it runs. Having some issues with video playback though. If I put the computer to sleep, then turn back on, can't play any videos on any browser. Youtube/twitch etc will load the picture but the video won't play. Restarting the computer will fix it. No clue why.

Also waiting for the ballistix ram to test. Hope it works out well.
Take note this is a beta BIOS and there are still some bugs give msi some more time to roll out the official version lah

MacClipper 18-07-2019 11:37 PM
Quote:
Originally Posted by Shahmatt (Post 121784882)
Can consider HyperX Fury. I was able to take mine from 2667Mhz to 3333MHz @ CL16, 1.35V.
Quote:
Originally Posted by Shahmatt (Post 121798613)
... Actually I just found old record showing I did push these to 1.43V (forgot I tried) and achieved 3400 CL14.
Very nice, do you have the detailed settings/timings for these 2 Micron B overclocks?

Pepperisk 19-07-2019 07:55 AM
No updates to the beta bios yet. Still at version 7A34v1OM(Beta version). Now also got issue when navigating the bios menu, very slow. Gonna reset the cmos after work and see if it helps

MacClipper 19-07-2019 08:38 AM
Asus Crosshair VII Hero Bios 2501
https://dlcdnets.asus.com/pub/ASUS/m...-ASUS-2501.zip

Quote:
AGESA 1.0.0.2

Fix an issue where the mouse will sometimes freeze in the UEFI.
Update multi-language string.
Fix an issue with the Safe Boot button.
"Before running the USB BIOS Flashback tool, please rename the BIOS file (C7H.CAP) using BIOSRenamer."

leecming 19-07-2019 09:09 AM
How much of an improvement can I expect for gaming if I upgrade from 1700 to 3700X?

MacClipper 19-07-2019 09:57 AM
Quote:
Originally Posted by leecming (Post 121811553)
How much of an improvement can I expect for gaming if I upgrade from 1700 to 3700X?
Simple question but not so simple answers cos it depends - which game, which GPU, which game resolution etc...



Yet another discussion of Ryzen 3K and undervolting
Why undervolting the new Ryzen processors is not very effective


Quote:
AMD seems to be getting the most out of the processors for standard operation due to a sophisticated system of voltage, clock and temperature monitoring. This applies both to the boost, as well as the most effective operation with the appropriate voltages. The scope for overclocking and undervolving is therefore low.

grimfan 19-07-2019 03:45 PM
Quote:
Originally Posted by leecming (Post 121811553)
How much of an improvement can I expect for gaming if I upgrade from 1700 to 3700X?
Short answer, definitely will have better performance in both average frame rates and definitely better 0.1 percent lows.

Long answer, how much depends on the GFX you are using, at what resolution you game on, what games you play etc.

shadey 19-07-2019 04:03 PM
I think Ryzen will have a "fine wine" effect. Game engines will become more and more thread aware, Windows OS and game engine compilers will start to optimize for the Ryzen CCX structure... All of the advantages Intel has now with compilers.

KWSW 19-07-2019 04:55 PM
https://www.reddit.com/r/Amd/comment...s_been_pulled/

looks like 1003aba has been pulled due to bugs... oh well some more waiting :s22:

MacClipper 19-07-2019 06:41 PM
Quote:
Originally Posted by concept_fuel (Post 121819685)
:s13: I'm on gigabyte x470 board with F40c bios Agesa 1.0.0.3ab and so far yet to see bugs:o
Quote:
Originally Posted by concept_fuel (Post 121819868)
So is 4000mhz possible on an X470 board?

:D
https://i.imgur.com/mFYqdm1.jpg

any benefits...hardly:s13:
Looks like this 10AB BIOS also does not auto-adjust the NB frequency for you, screenshot still shows low speed IMC. Anyway, you can try to manually adjust it.


Here's what The Stilt says.

Quote:
Originally Posted by The Stilt
CPU-Z Northbridge Frequency
The "Northbridge Frequency" displayed by CPU-Z is NOT the FCLK (fabric) frequency. Instead it is the frequency of the memory controller itself (UCLK). Normally both FCLK and UCLK operate at the same speed (MEMCLK). When FCLK and MEMCLK are desynchronised, UCLK will be set to 1/2 mode. Regardless if you lower or raise it below / above the MEMCLK. For example, if MEMCLK = 3200MHz and FCLK is anything else than 1600MHz, the UCLK frequency will be MEMCLK / 2 (i.e. 800MHz).

No third party software (for the time being) can monitor FCLK frequency.


All times are GMT +8. The time now is 10:19 PM.

Show 50 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Copyright © SPH Magazines Pte Ltd. All rights reserved.