HWZ Forums

Methanol · 02-09-2015, 02:03 PM

5 years and the aircon was regularly service and didn't give us much problem till last week when the compressor stopped working.

Methanol · 02-09-2015, 02:07 PM

Thks stream2, will contact some for my new contract.

hOp3SoT · 03-09-2015, 01:51 AM

kimsim wrote:

That unit set on 20C would be tells the compressor kick in runs in full speed until you turn off.

The rest set in 25C just works as normal only.
Actually use high fan speed also will increase outdoor working speed to blow out in high speed and high power input as well.

thx for the explanation! is it normal if all 3 units r on and set at 25C and fan 1 but it doesnt hits 25C even after >1.5 hrs? rm size is abt 3 x 4.7.

Cooling Aircon Services · 03-09-2015, 03:42 AM

CCCustom wrote:

We are still in the planning stage A friend of The Other Half put in these folding doors/partition to their hall to have an airconditioned home theatre, and she wants to do something similar.

Like I was saying, I'm new to this sort of thing ... my understanding of your reply is that, a System 4 cannot run all 4 units at the same time? Is that correct?

If u're installing it for 4 rooms (BTU 9k*4), it should be fine to run all 4 units at the same time. It may take just awhile longer to cool the rooms. If u need more details and explanations, feel free to contact us at 81134479 so i can explain it to u easier thru phone

kimsim · 03-09-2015, 07:08 AM

hOp3SoT wrote:

thx for the explanation! is it normal if all 3 units r on and set at 25C and fan 1 but it doesnt hits 25C even after >1.5 hrs? rm size is abt 3 x 4.7.

I guess the gas shortage, should check the gas pressure at least has 150 around there.

librahaha · 03-09-2015, 01:44 PM

Hi.. wanted to install a sys 2 aircon and got 2 Quot as follows:
- Mit HI $2,200 for SCM45 + SRK25 (9k btu) x 2
- Mit Starmex $2,299 for 2E20VA + GE10VA (9k btu) x 2

Is the above price reasonable and which one should I choose.

Thanks.

Gribber · 03-09-2015, 02:15 PM

librahaha wrote:

Hi.. wanted to install a sys 2 aircon and got 2 Quot as follows:
- Mit HI $2,200 for SCM45 + SRK25 (9k btu) x 2
- Mit Starmex $2,299 for 2E20VA + GE10VA (9k btu) x 2

Is the above price reasonable and which one should I choose.

Thanks.

Starmex... easier ?

the price is alittle high though

wengchiat · 03-09-2015, 10:26 PM

Hi,

Looking for a Starmex Sys 3, with 10000x1, 9000x2.

How much should I be looking at, with insulation, including all hidden costs?

kohkindachi · 04-09-2015, 12:49 PM

I'm looking to have air con in 4 rooms too. Should I just buy from those retail store at IMM?
Or can someone PM me contacts sellers who can provide reasonable price? Thanks

hOp3SoT · 04-09-2015, 05:37 PM

kimsim wrote:

I guess the gas shortage, should check the gas pressure at least has 150 around there.

the person came to check and say tat the gas pressure is normal at abt 125 and they refer me to Mitsubishi agent for further check.

kimsim · 04-09-2015, 06:01 PM

hOp3SoT wrote:

the person came to check and say tat the gas pressure is normal at abt 125 and they refer me to Mitsubishi agent for further check.

Not enought, if non inverter R22 should be the right, for inverter were high pressure should remain as 150 -/+

That is why not cold at all

You decreased the temp then end out you need pay more electricity only

master_audio · 05-09-2015, 06:45 PM

I am thinking of changing my existing almost spoiled National (yeah! not Panasonic) Aircon to a System 3 Aircon, but I got the feedback that ME will change their model by the coming December - is this true?

Originally I thought the ME compressor is made in Japan, but was told is made in Thailand. I'm torn now and thinking of getting other brand like Fujitsu. Any opinion? Thanks in advance.

kimsim · 05-09-2015, 08:19 PM

master_audio wrote:

I am thinking of changing my existing almost spoiled National (yeah! not Panasonic) Aircon to a System 3 Aircon, but I got the feedback that ME will change their model by the coming December - is this true?

Originally I thought the ME compressor is made in Japan, but was told is made in Thailand. I'm torn now and thinking of getting other brand like Fujitsu. Any opinion? Thanks in advance.

Fujitsu was cheap, but most of parts is made in China