[maur_james]

victoryeo wrote:

I read the offer is till end Jun 16, and to install by end Sept 16.

Hmm...interesting...

[asiafrenz]

jan97 wrote:

Installed Mitsubishi 3G28 with 2x FJ10VE and 1 x FJ13VE in the bedrooms and MUY-GE24/MSY-GE24 in the living room last week.
Soft humming noise from the 3G28 compressor when running at full power, after rooms reached set temp., the noise is barely noticeable. Everything is cool, the indoor units are quiet and can cool the rooms fast, before 30 Deg C, after 10 mins, temp. dropped by 2 deg c. Default current limit is set at 8.5A can be changed by pushing 5th switch position on SW2 to off.

at what temperature do you feel the room is cool enough for this new 5 ticks model compared to your previous experience?

anyone else also using the new 5 ticks mitsubishi aircon? good experience so far? any negative?

[pchltws]

ksrokiller wrote:

This price include new piping installation?

No, used back old piping.

[jan97]

asiafrenz wrote:

at what temperature do you feel the room is cool enough for this new 5 ticks model compared to your previous experience?

anyone else also using the new 5 ticks mitsubishi aircon? good experience so far? any negative?

I set all the 3 rooms temp.to 24 deg c,read back on fluke 52 is 24.3 deg c on all the rooms.So far no complains,the time taken to cool down all 3 rooms as compared to my previous 4a28 with 3 x 10ve is comparable,in fact I think it is even more faster with the new airconditioner. The older Mitsubishi when started ,the fan is at full blast while he new ones are operating at medium speed

[I'mknotdumb!]

Hi all anyone know where can i buy cheap aircon remote control? i went to a few remote control shop the boss all quoted me $36-$50+

[asiafrenz]

jan97 wrote:

I set all the 3 rooms temp.to 24 deg c,read back on fluke 52 is 24.3 deg c on all the rooms.So far no complains,the time taken to cool down all 3 rooms as compared to my previous 4a28 with 3 x 10ve is comparable,in fact I think it is even more faster with the new airconditioner. The older Mitsubishi when started ,the fan is at full blast while he new ones are operating at medium speed

thank you, sounds good then

[Kusanagi]

was given the following quotation

Inverter type single split 12k btu
Mitsubishi heavy industrial
SRK13 / SRC13 = $ 1350 net

Daikin
RKS35 / FTKS35 = $ 1600 net

Mitsubishi starmex
MUYGE13 / MSYGE13 = $ 1500 net


not the cheapest for starmex and daikin it seems

[carlover76]

Artliner15Aug77 wrote:

don't buy Daikin cause not all model entitle 1+2 warranty.

Oh, what are the models for Daikin entitled for the 1+2 warranty?

I just check with the Official Installer from Daikin Proshop that the warranty is valid for all Multi-Split System which use R410 gas and till End June, it is not applicable for Single Split System or using R22 Gas.

So no issue if I want to install the Silver Envi System.

[carlover76]

Artliner15Aug77 wrote:

Better see yourself below:

Thanks, brother. I should be installing next month so no issue.

[carlover76]

Boeing101 wrote:

Eh, he is asking you to read the Term and Conditions.

Anyway, anyone got commend on CoolForce? Their website look informative.....
Looking for installers for my mum home, otherwise, might use back Coolserve.
The only thing i dont like Coolserve is they use hand to bend my G22 pipe and the brand they use for my G22 pipe is NAtube, while their website promise DNE. Wtf is that brand when i pay premium for their QC and services. They charge me extra piping length i also give in to their favour. I just ask for what i should get and i pay for it! 😡😡

Yes, saw the full set in T&C. Will clarify with the Proshop again on the Full Sets again before installing.

[Boeing101]

carlover76 wrote:

Yes, saw the full set in T&C. Will clarify with the Proshop again on the Full Sets again before installing.

Can 4MKS80 use with Silver Envi system?
I thought 4MKS80FSG can only use together with those dull looking indoor unit. No?

[carlover76]

Boeing101 wrote:

Can 4MKS80 use with Silver Envi system?
I thought 4MKS80FSG can only use together with those dull looking indoor unit. No?

No, 4MKS80FSG can be used with Silver Envi. Some companies quote me with this Compressor together with Silver Envi fancoil, normal fancoil and Silver Envi all are using R410 Gas so no problem.

[Pathfinder]

Any comments on workmanship of Cold Engine Engineering?

[diatomics]

Hi guys, between the 3 companies i shortlisted
A)gain city
B)supreme air
C)star cool

I need really reliable and good services cause i seen many stories on bad installations and setup. Could anyone advise?

[1YEGG2KOSONG]

Hi guys, i'm looking to install a system 3 for my parents place, old HDB. Am looking at Panasonic and Mitsubishi. Couldn't decide on which. And also to get it from GC or other contractor. Understand that GC will be more expensive but there is extended warranty option. Contractor would be cheaper but workmanship probably would be better if I were to find the right contractor as GC will be up to luck on who is doing the installation. Hope you guys can shed some light.