[terumo]

To DarthGW,

4mks80fsg max btu output should be 32-34k btu.

[DarthGW]

terumo wrote:

To DarthGW,

4mks80fsg max btu output should be 32-34k btu.

thanks, what is also ur opinion on the installer to take?

[gentoro]

DarthGW wrote:

anybody can advise?

Nobody can truly 100% correct advise you, it could go either way good or bad.

IMO, if both giving same upgraded material, I will choose the longer warranty and cheaper one.

[kyteo79]

To all seniors and old birds,

i got the following quote ;

option1
3 mks71fsg 50/35
3 mks71fsg 50/35
FTKS50DVM single split

9.1k

Option 2
3a28va 18/21
3a28va 18/12
mxy18va split wall mount

9k

SWG 22 copper piping
H type Armaflex
16mm drainage pipe with insulation
sigma wire (taiwan)
litaflex casing ???

1 year workmanship warranty
3 year spare parts accessories
5 yr compressor ...

IS this a good deal or better ones ?

where got good for value package basis above configurations ?

Can pm if sensitive

[royalgoldkid]

All compressors will be connected to power point right? Not sure where is mine...

[petetherock]

royalgoldkid wrote:

All compressors will be connected to power point right? Not sure where is mine...

Typically it's on a ledge or yard.. so the switches should be close to them.

[nomoney25]

Need help here.

After returing home from my 2 weeks oversea trip. My 2 other bedrooms aircon could only blow air but not cold air. My masterbed room is OK. My aircon is Mitsubishi starmex sys 3 . It was installed in 2008 and last servicing was done after CNY.

I was told that my masterbed indoor unit was connected to one motor and the other 2 bedrooms which are blowing the hot air are connected to another motor during the installation. I hope some experts should be able to identify the problem and roughly advised me what is the cost of repairing this issue either from Mitsubishi or outsider aircon repairer?

[mcylo]

Hi All,

My Samsung system 3 has decided to call it a day after serving our family for more than 10 years. It is beyond repair now.

Would like to check anyone purchase aircon from gaincity, do they have additional charge if they need to dismantle the old air con, compressor and copper pipping etc.

Looking to buy a system 1 mit starmex for my bedroom. Thanks.

Any good lobang is welcome. Thanks for sic in advance.

[lydiasops]

mcylo wrote:

Hi All,

My Samsung system 3 has decided to call it a day after serving our family for more than 10 years. It is beyond repair now.

Would like to check anyone purchase aircon from gaincity, do they have additional charge if they need to dismantle the old air con, compressor and copper pipping etc.

Looking to buy a system 1 mit starmex for my bedroom. Thanks.

Any good lobang is welcome. Thanks for sic in advance.

My experience with Harvey Norman is better than Gain city or Courts. You may wanna check them out too. One reason I got from them is that they will provide warranty even for the motherboard. More for a peace of mind coz Courts said they include all except this in their warranty. For GC, it's their inconsistent sales service that got me worried. One quote this price, another guy will quote another price. And they keep pushing me for MHI.

[ragegoh]

Just bought fujitsu system 3 at courts. $3299 for 1+4 years extended warranty and one free servicing. Hope it will last and work well.

[galliano]

Got a quotation for 2.8k for Mitsubishi System 3 including change-out of my aircon ducts at home. Not sure if price is ok.

My current Panasonic died after 11 years.

[gentoro]

galliano wrote:

Got a quotation for 2.8k for Mitsubishi System 3 including change-out of my aircon ducts at home. Not sure if price is ok.

My current Panasonic died after 11 years.

Quite good pricing!

[gentoro]

nomoney25 wrote:

Need help here.

After returing home from my 2 weeks oversea trip. My 2 other bedrooms aircon could only blow air but not cold air. My masterbed room is OK. My aircon is Mitsubishi starmex sys 3 . It was installed in 2008 and last servicing was done after CNY.

I was told that my masterbed indoor unit was connected to one motor and the other 2 bedrooms which are blowing the hot air are connected to another motor during the installation. I hope some experts should be able to identify the problem and roughly advised me what is the cost of repairing this issue either from Mitsubishi or outsider aircon repairer?

Few things may happened:
1) Insufficient refrigerant - simple, just top up. Check for leakage
2) Choked refrigerant pipe - unlikely and can be checked easily and just replaced the section which are choked
3) Spoiled invertor (motor) - Good game - can go buy a new compressor or get whole new system.
4) IC board spoiled - possible, just replace new IC board.

We cannot advise you on how much the cost from Mit or outside serviceman. Its all up to you.

[gentoro]

mcylo wrote:

Hi All,

My Samsung system 3 has decided to call it a day after serving our family for more than 10 years. It is beyond repair now.

Would like to check anyone purchase aircon from gaincity, do they have additional charge if they need to dismantle the old air con, compressor and copper pipping etc.

Looking to buy a system 1 mit starmex for my bedroom. Thanks.

Any good lobang is welcome. Thanks for sic in advance.

Go neighbourhood stall for competitive prices. That's the lobang. Pre-check ur requirement before confirming the pricing - dismantle AC and pipping.

[Asakura]

4rm hdb will take sys4 or 3+1 or 2+2(daikin 5tick no sys1??)