HWZ Forums

steven0608 · 03-10-2009, 03:18 PM

chunlianghere wrote:

the above Daikin uses R22, thus cheaper, yet lesser maintenance n problem. now R410 still very exp in terms of gas itself. so would recommend using R22 system now.. although the total price is abit exp, but i tink its worth it. Daikin only makes aircon, i believe it shld be better than other manufacturer. not sure wats others opinion..

Hi,

Just know that G...C give and $150 less of $2799 and also free $200 NTUC voucher so net net is $2499. They provide G22 copper pipe with 3/4" insulation for Mit Heavy Ind sys 3 inverter.

As compared to Daikin sys 3 R22 inverter, it is an saving of $500.

So bro, is Mit Heavy Industrial OK ?

Please advice.

chunlianghere · 03-10-2009, 04:51 PM

steven0608 wrote:

Hi,

Just know that G...C give and $150 less of $2799 and also free $200 NTUC voucher so net net is $2499. They provide G22 copper pipe with 3/4" insulation for Mit Heavy Ind sys 3 inverter.

As compared to Daikin sys 3 R22 inverter, it is an saving of $500.

So bro, is Mit Heavy Industrial OK ?

Please advice.

wow..not bad!

yup..tat is gd. u can search in this thread. i remember there is gd things about MHI.

mikezuper · 04-10-2009, 08:46 AM

I have the same sentiment with chunlianghere on Daikin aircon, thats why I choose Daikin

Using sys-3 non-inverter for my bedrooms and sys-1 inverter for my living room.

steven0608 · 04-10-2009, 10:22 AM

mikezuper wrote:

I have the same sentiment with chunlianghere on Daikin aircon, thats why I choose Daikin

Using sys-3 non-inverter for my bedrooms and sys-1 inverter for my living room.

Hi,
Me too! R22 Daikin is still the best. My thinking is that whichever system running at higher pressure (r410a is 1.5 times higher than r22), it tends to leak more easily in joints if not installed properly so installers play a major role in the durability of the system.

If Daikin can give $200 ntuc voucher, then I don't mind re-consider this

$500 different is a lot. For my case, I still need to pay $660 for cutting hole at false ceiling for piping...

Unless I dont change piping which I believe this is not recommended since it is already 10 years old piping.

tellim · 04-10-2009, 10:39 PM

just purchased a MHI inverter system 3 aircon from Best Tech w extended warranty purchased.

going to scrap my 10yr old National aircon. Actually 2 units are working ok except the one in master room not cooling properly (due to daily usage) so decided to change all.

hope the installation will be good. heard good and bad things about Best Tech To be fair, other coys have their bad installations too. just pray mine will be ok.

Mugen · 04-10-2009, 11:01 PM

tellim wrote:

just purchased a MHI inverter system 3 aircon from Best Tech w extended warranty purchased.

going to scrap my 10yr old National aircon. Actually 2 units are working ok except the one in master room not cooling properly (due to daily usage) so decided to change all.

hope the installation will be good. heard good and bad things about Best Tech To be fair, other coys have their bad installations too. just pray mine will be ok.

Whats the total cost for the MHI sys? thks!

tellim · 04-10-2009, 11:21 PM

$2600 inclusive $250 added for extended warranty. price also includes service vouchor, light vouchor given by them.

Mugen · 05-10-2009, 01:53 PM

tellim wrote:

$2600 inclusive $250 added for extended warranty. price also includes service vouchor, light vouchor given by them.

Yours quite a good price...

I just bought mine at GC...

MHI sys 3 = $2699 free $200 NTUC voucher

Upgrade to Armaflex 1/2" and copper 22 with 16mm drain pipe = $180

Add 2 yrs service contract = $350

Extend to 5 yrs warranty = $359

S/S bracket = $150

Trade-In old sys 3 = -$150

Total = $3588

tellim · 05-10-2009, 03:11 PM

the service vouchor given i think is $150, lighting vouchor only $50.

purchase was done by my father. dont think we upgrade anything on the wiring neither any trade-in.

let me check receipt at home later bah? but confirm less than ur amt.

thesingingbard · 07-10-2009, 12:08 PM

steven0608 wrote:

Hi,
Me too! R22 Daikin is still the best. My thinking is that whichever system running at higher pressure (r410a is 1.5 times higher than r22), it tends to leak more easily in joints if not installed properly so installers play a major role in the durability of the system.

If Daikin can give $200 ntuc voucher, then I don't mind re-consider this $500 different is a lot. For my case, I still need to pay $660 for cutting hole at false ceiling for piping...

Unless I dont change piping which I believe this is not recommended since it is already 10 years old piping.

i assumed your old piping was running R22? If you change to R410a, then you'll have no choice but to change your piping.

since you've oredi decided on R22 Daikin... you do have a choice of re-using the old pipes...

steven0608 · 07-10-2009, 04:58 PM

thesingingbard wrote:

i assumed your old piping was running R22? If you change to R410a, then you'll have no choice but to change your piping.

since you've oredi decided on R22 Daikin... you do have a choice of re-using the old pipes...

Hi,
Yes, I can re-use my old piping BUT I believed my piping is leaking since I needed to top-up gas every year and many said that the leak will get worse as time come by. Furthermore, GC only discount like $150 for not laying new piping assuming I am using Daikin R22 inverter.

After serious consideration for whole 2 weeks, I decided to change piping. So if piping needs to change, then I have more choices. I can use either R22 or r410a. Then MHI is the cheapest running on r410a.

This is my case.

chunlianghere · 07-10-2009, 05:23 PM

steven0608 wrote:

Hi,
Yes, I can re-use my old piping BUT I believed my piping is leaking since I needed to top-up gas every year and many said that the leak will get worse as time come by. Furthermore, GC only discount like $150 for not laying new piping assuming I am using Daikin R22 inverter.

After serious consideration for whole 2 weeks, I decided to change piping. So if piping needs to change, then I have more choices. I can use either R22 or r410a. Then MHI is the cheapest running on r410a.

This is my case.

provided if your new piping is thicker which also can use for r410..

so wonder wat is your new aircon spec?

navarro_t · 07-10-2009, 06:06 PM

that time my auntie went to a shop in yishun ave 5...think the price not bad...

terumo · 07-10-2009, 08:39 PM

Yishun Ave 5 should be Hong Tar.

steven0608 · 08-10-2009, 01:14 AM

chunlianghere wrote:

provided if your new piping is thicker which also can use for r410..

so wonder wat is your new aircon spec?

Hi,
Here it is :

Mit Heavy Indust sys 3 inverter r410a
SCM60ZG-S (25590BTU) compressor
SKM28ZG-S X2 (9553 BTU FAN UNIT)
SKM35ZG-S X1 (12000 BTU FAN UNIT)

Cost $2799
minus $150 trade-in old air cond
minus $200 NTUC voucher

Total net $2499 with GST with the following upgrade:

G22 copper pipe
3/4" Armouflo insulator
used back old drainage pipe because consealed inside wall

Good deal ?

I prepare to buy 5 years extended warranty so + $399

total $2848

HWZ Forums

Air conditioning - Any recommendations please??

Sponsored Links

ZenBook Ultraportable Buying Guide

Go beyond flawless with MyRepublic