www.hardwarezone.com.sg


www.hardwarezone.com.sg (/)
-   Internet Bandwidth & Networking Clinic (https://forums.hardwarezone.com.sg/internet-bandwidth-networking-clinic-4/)
-   -   [Maylyn's Review] ASUS RT-AC3200 Router (https://forums.hardwarezone.com.sg/internet-bandwidth-networking-clinic-4/%5Bmaylyns-review%5D-asus-rt-ac3200-router-4997708.html)

BestPilot 03-03-2019 11:11 PM

Asuswrt-Merlin 384/NG Changelog
===============================

384.9 (2-Feb-2019)
- NEW: Temporarily reorganized code in separate branches, to handle
Asus's currently scattered firmware source code releases.
The GPL situation for this release is as follow:
o RT-AX88U: Merged GPL 384_5329
o Other models: Merged GPL 384_45149.
o Special binary blobs provided by Asus for the RT-AC87U
and RT-AC3200 (compatible with 384_45149).

- NEW: Added NFS client support (V2 and V3) to the
RT-AC86U and RT-AX88U (already present in older models)
- NEW: Report the number of spatial streams and the PHY type
used by wireless clients for models supporting it
- NEW: Display tracked connections on the QoS Stats page (now
relabeled "Classification").
Fields can be sorted by clicking on the column headers.
Thanks to FreshJr for his help in deciphering the packet
mark values.

- NEW: Implemented ipsec.postconf and strongswan.postconf scripts.
- KNOWN ISSUE: dcd process crashing on RT-AC86U (bug in Trend
Micro's code, outside of my control).
- KNOWN ISSUE: IPv6s on Tracked Connections have their last
two bytes set to 00 (bug in Trend Micro's
code truncating the last two bytes).
- KNOWN ISSUE: No IPS events logged (bug in Asus's code,
IPS should work, just fails to log hits)
- KNOWN ISSUE: Networkmap listing may be unreliable.
(Bug in Asus's code)
- KNOWN ISSUE: Users failing to read changelogs will
probably complain about the above issues.
(Outside of my control).
- CHANGED: Updated wget to 1.20.
- CHANGED: Updated nano to 3.2.
- CHANGED: Updated curl to 7.62.0.
- CHANGED: Updated Chart.js to 2.7.3.
- CHANGED: Updated dnsmasq to 2.80-32-g28cfe36 (themiron)
- CHANGED: Optimized some JS files to reduce their size
- CHANGED: OpenVPN clients can now accept CNs up to 255 chars
when using it to validate the certificate.
- CHANGED: No longer reset the OpenVPN client's description,
policy mode and existing rules when uploading an
.ovpn config file.
- CHANGED: No longer accept any server-provided route
when OpenVPN client set to Policy (Strict).
- CHANGED: Clients bound to DNSFilter rules will no longer
bypass it by using DoT. DNSFilter servers that
support DoT (like Quad9) will only allow filtered
clients to use that server
- FIXED: Firmware update checks would not run at boot time
on the RT-AX88U.
- FIXED: Name resolution issues for /etc/hosts entries on
HND models (themiron)
- FIXED: Syslog not properly copied to JFFS on reboot
(John Bacho)
- FIXED: Volumes not properly unmounted on HND platform
(John Bacho)
- FIXED: Added missing TEE Netfilter target on the RT-AC86U
- FIXED: SSH brute force protection didn't work in Dual WAN
load balancing mode.
- FIXED: httpd crashes on RT-AC86U (themiron)
- FIXED: DNSFilter clients could use a different nameserver
when using an IPv6 connection
- FIXED: USB disk idle config changes not applying without a
reboot.
- FIXED: "Strict" DNS mode wasn't working properly with OpenVPN
clients
- FIXED: Cannot upload JFFS backup on HND models

Jurong640 29-06-2019 10:56 AM

Firmware version 3.0.0.4.382_51640

- Release Note -


Bug fixes and improvement:

- Fixed firmware update notification bugs.

- Fixed dual wan user interface bugs.

WWE_Fan 13-07-2019 06:25 PM

I'm experiencing Dhcp error today. Been trying to troubleshoot for the last 3 hours. Is it really because of the router going EOL?

ingen 14-07-2019 06:03 PM

Quote:

Originally Posted by WWE_Fan (Post 121722591)
I'm experiencing Dhcp error today. Been trying to troubleshoot for the last 3 hours. Is it really because of the router going EOL?

I just experienced this dhcp issue today too. anyone else?

have tried toggling on/off WAN and reflash the firmware, no luck

BestPilot 22-07-2019 12:52 PM

Quote:

Originally Posted by ingen (Post 121737030)
I just experienced this dhcp issue today too. anyone else?

have tried toggling on/off WAN and reflash the firmware, no luck

How does the error look like? Do you have a screenshot?

guile 28-07-2019 07:00 PM

Quote:

Originally Posted by _DeS__ (Post 117850019)
Shifted to my new house recently and unable to hit 800-900mbps on lan connection.

Direct connection to ONT can get full speed, but if pass through RT AC3200 only can hit 400-500mbps. Tried changing LAN cable between ONT>ROUTER still same issue. Tried both Merlin 384.5 and 384.6 firmware both still same issue. Any solution ?

I seem to be getting this same problem too. Previously was able to hit 700+. No change in the wiring. Just not sure what happened.

Jurong640 02-08-2019 11:53 PM

Quote:

Originally Posted by guile (Post 121964646)
I seem to be getting this same problem too. Previously was able to hit 700+. No change in the wiring. Just not sure what happened.

Quote:

Originally Posted by _DeS__ (Post 117850019)
Shifted to my new house recently and unable to hit 800-900mbps on lan connection.

Direct connection to ONT can get full speed, but if pass through RT AC3200 only can hit 400-500mbps. Tried changing LAN cable between ONT>ROUTER still same issue. Tried both Merlin 384.5 and 384.6 firmware both still same issue. Any solution ?

I had this issue recently, speed test only reach 380mbps. Called up my isp, isp did a reset on their end, ask me to do a direct ONT connection test. After direct ont connection able to reach 950mbps. Then, i know it's not the isp fault.

I factory reseted the router to factory settings, and speeds resume to 950mbps. I had this issue many times previously on this router. It seems to have this issue after the router has been on for a long time.

guile 03-08-2019 03:13 PM

Quote:

Originally Posted by Jurong640 (Post 122050706)
I had this issue recently, speed test only reach 380mbps. Called up my isp, isp did a reset on their end, ask me to do a direct ONT connection test. After direct ont connection able to reach 950mbps. Then, i know it's not the isp fault.

I factory reseted the router to factory settings, and speeds resume to 950mbps. I had this issue many times previously on this router. It seems to have this issue after the router has been on for a long time.

hmm, that will it work if i save my current configuration, reset the router to factory settings and restore to my saved configuration?

Or will a simple on and off work?

Jurong640 03-08-2019 08:07 PM

Quote:

Originally Posted by guile (Post 122058436)
hmm, that will it work if i save my current configuration, reset the router to factory settings and restore to my saved configuration?

Or will a simple on and off work?

Nah need a factory reset. I tried restarting and on off, do not work.

Try not to restore the saved configuration, I encounter these issues is because I restore it previously.

guile 03-08-2019 10:25 PM

Quote:

Originally Posted by Jurong640 (Post 122062338)
Nah need a factory reset. I tried restarting and on off, do not work.

Try not to restore the saved configuration, I encounter these issues is because I restore it previously.

ah man, i have a lot of settings in the router...k will have to try it.

hyper_megaman 26-08-2019 09:13 AM

hi guys just to get a feel from the general users here, how's the AC3200 from personal experience?

I'm currently on an AC87U which is very unstable. considering a change to an AC3200. Anyone encountered any issues here with this model / chipset?

I've flipped through the last few pages, doesn't seem to have many complaints here.

BestPilot 03-09-2019 02:17 PM

No complains

guile 24-09-2019 03:54 PM

Quote:

Originally Posted by Jurong640 (Post 122062338)
Nah need a factory reset. I tried restarting and on off, do not work.

Try not to restore the saved configuration, I encounter these issues is because I restore it previously.

Just did a few test after I did a factory reset. It seems enabling QOS will cause the Speedtest to drop to about 400-500mbps. I disabled it and I can reach about 800-900mbps. Very weird but I'm disabling QOS for now.

MoyoCase 22-06-2020 12:00 PM

Quote:

Originally Posted by trichard (Post 93581843)
Use this -

http://i.imgur.com/E7aveNU.png

Apply and Reboot .

Read here also http://www.snbforums.com/threads/asu...-tuning.22823/

Plus this - http://www.smallnetbuilder.com/wirel...missing-manual

I can bet ASUS@SG not even till that depth yet .

can this be used for the dual band ASUS router. if yes any modifications to be done to the values?


All times are GMT +8. The time now is 09:33 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright © SPH Magazines Pte Ltd. All rights reserved.