www.hardwarezone.com.sg


www.hardwarezone.com.sg (/)
-   Internet Bandwidth & Networking Clinic (https://forums.hardwarezone.com.sg/internet-bandwidth-networking-clinic-4/)
-   -   [Review] Asus RT-AX88U (https://forums.hardwarezone.com.sg/internet-bandwidth-networking-clinic-4/%5Breview%5D-asus-rt-ax88u-6012723.html)

forkie 26-03-2019 05:46 PM

Quote:

Originally Posted by athenodorus (Post 119905449)
Other than s10, those non wifi6 devices..what's the avg wifi speed?

I never did much optimization so the usual devices speed range about 100-200mbps for upload/download.

AC2 26-03-2019 08:28 PM

Quote:

Originally Posted by forkie (Post 119905748)
I never did much optimization so the usual devices speed range about 100-200mbps for upload/download.

so you enable HE after installing the latest firmware or disable to get the high wifi speed on your s10?

forkie 26-03-2019 09:39 PM

Quote:

Originally Posted by xonix (Post 119905657)
Under your " Wi-Fi name " connection, advanced or info

Is it this one ?

https://farm8.staticflickr.com/7843/...6c0bf5f1_k.jpg

Quote:

Originally Posted by AC2 (Post 119908495)
so you enable HE after installing the latest firmware or disable to get the high wifi speed on your s10?

I had enable HE before firmware update and the speed is as normal around 200mbps which kinda make me disappointed coz I hyping for blazing speed.


Then when there was a new firmware update and when I installed it woah lah ! The speed is damn shiok ahahaha !

xonix 26-03-2019 09:47 PM

Quote:

Originally Posted by forkie (Post 119909919)
Is it this one ?

[ IMG]https://farm8.staticflickr.com/7843/46748276504_a06c0bf5f1_k.jpg[/IMG]

Bingo !
1200 Mbps link rate :eek:

forkie 26-03-2019 09:57 PM

ZZZzz KNN the WIFI6 still not ideal.
Now I yaya papaya go Router settings play play toggle HE frame.....
My 1200mpbs rate GONE !!!!!


Initially after firmware update so shiok in room 648mpbs link rate, Living room 1200mpbs link rate.

Then itchy hand go toggle the HE frame.... poof !!!!! WIFI6 gone and link rate back to 286... Now enable back HE frame but my speed still stuck at 286 !!!!!! :mad: duno why my wow oooo wee speed gone liao ! 气死人 !!!!

Ah Ken 26-03-2019 10:26 PM

Can enlighten me what is this HE frame? Noob in this field... Google doesn't say much, maybe I don't know how to google right.. :s22:

AC2 26-03-2019 10:33 PM

just reflash the firmware lar.( load old version then back to latest)

It just shows that the current firmware for the ax 88 is still unstable .

Anyway this router still new. give them some time. confirm better firmware will be out later.

vaxvms 26-03-2019 11:00 PM

Quote:

Originally Posted by AC2 (Post 119903535)
Ax88u as router, 2 x 5300 as nodes. With HE disable, my iphone wifi speed can hit 600Mbps up 600 Mbps down on 1 Gbps plan.
If i enable HE, straight drop to less than 200Mbps.

actually i thinking Ax88u as node since wifi6 haha

forkie 26-03-2019 11:01 PM

Fixed it. Have to power off and on the router again. On router page rebooting or re-enabling HE frame cannot work. Speed stuck at miserable 286mbps unless off the whole router.
Phew ! Heng can get back the speed but yah the new wifi6 still need allot improvement.

forkie 26-03-2019 11:05 PM

Quote:

Originally Posted by Ah Ken (Post 119910938)
Can enlighten me what is this HE frame? Noob in this field... Google doesn't say much, maybe I don't know how to google right.. :s22:

New feature for AX router to enable high speed data transfer which is wifi6 speed. But some equipment and device may be affected by the new feature which may slow the speed instead. Thus got this feature to enable and disable.

forkie 26-03-2019 11:33 PM

Ran a test on other devices.
My S8 getting good speed as well.
428mbps link rate in master bedroom.
648mbps link rate in living room.
This new AX88U router is pretty impressive.

My old AC88U hardly get anything close to 400mbps on 5G.
300-400 is on very good days.

JayceOoiCom 28-03-2019 10:08 AM

Yeah... Just managed to get my AX88U back. Going to try out the latest firmware as well. :)

ksksksks 29-03-2019 07:28 PM

I got the ax11000u. Not much difference with this ax88u in terms of speed but the range is better.
Just some tips in case some of you guys find ur wifi speed slow or your printer have a hard time getting connected.. Disable smart band steering and make sure 2.4ghz is on 20mhz only. Make sure AX is off and also don’t turn on DFS channel.

ksksksks 03-04-2019 07:18 PM

https://i.imgur.com/2EWZCbF.jpg

Speedtest for close range on Ax11000

athenodorus 03-04-2019 08:12 PM

Quote:

Originally Posted by ksksksks (Post 120056495)
https://i.imgur.com/2EWZCbF.jpg

Speedtest for close range on Ax11000

What device?


All times are GMT +8. The time now is 10:57 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright © SPH Magazines Pte Ltd. All rights reserved.