In ONR mode, you cannot use your own router.

Another option for you to consider is to see if your company can allow you to use a VPN client to be installed on your computer. This way, you don't have to use the router.

Sorry for bumping up old thread.

Anyone able to advise on the username and password for support account? i cant seem to login to support account except for root/admin account. In the root/admin account i dont see any option that i can change to bridge mode.

TIA!

I can imagine those who use ONR and plug their NAS directly. Lolx sensitive document all exposed to singtel support. Good luck.

I had to bang table to get them change to bridge mode. Took them a while to sink in when i did recontract. They assumed i used the new plan with ONR when my original plan is unlimited fiber with ONT. They shut my network within mins. Sales is clueless what they sell. Tech support is clueless on what they support. I strongly do not recommend anyone subscribe to singtel. What era are we. Who on earth still watch singtel TV?

you mean your network down after they switch ONR-ONT? now how? back to ONT to use your own router or use back their ONR? Thanks

Yes, after you bang table they will change the configuration on your ONR to ONT. From there onwards u need to connect your own router.

So you were successful in convincing SingTel too to configure the ONR to ONT?

Recently a few people were able to do that, like tuntun and Repsol_2.

Are u talking about bridged ONR? It can be done by ur own.

Yes. So you have done that and it works for you? There are conflicting reports in this forum about the success or failure of bridging by yourself.

Do you have SingTel TV or just plain internet? Are you using Huawei or Nokia ONR?

If you get SingTel to do it for you, it seems they can give more flexibilities, like one bridged port (ONT port) without vlan, plus three port for SingTel TV (no internet access), like in tuntun's case for Nokia ONR. And prior cases for mun_hoe and Downloader, for Huawei ONR.

Ref: Huawei ONR cases
https://forums.hardwarezone.com.sg/i...5637111-7.html

The following is from the expert miloaisdino.

Ya, as long as u can access ur huawei ONR as admin account, u can set it to whatever port u want, my one currently port3 port4 can be used for WAN IP. I didnt use singtel tv though, but saw those vlan settings inside. Should be no issue to set it when there is a need.

how can I do if I want to create port 2 to get WAN IP?

U can google HG8244H, open the site with a name of “medium”

Can reference from it.
Idea is that instead of set all 4 ports into bridge mode. U may decouple 2 ports out from there and additionally create one new connection with bridge wan. Dont overlap the binding ports. Remember the TR_xxx is quite useful if u dont want ppl to change ur things. ;)

So by that u can have 2 with original settings to keep the rest work as per normal.

Just to share the idea for u to explore. Didnt share the details, dont want other ppl to anyhow follow blindly ltr create more trouble. (More user problem, more complains, more shits for technician to clear)

Sharing it because ppl here seems to have an impression of singtel onr can only support 3rd party router as AP. 🥴

Thanks for the sharing. Actually I know that the ONR can be configured into different configuration. But my impression is only SingTel can do it to match their back end settings.

Still for inexperienced users, it is better not to mess too much with the ONR.

And take note if you change the ONR configuration, you are on your own and you will not be supported by SingTel if you got issues.

Yup yup, agree with u.
Not recommended for ppl dont have real interest to explore. (At least can clear their own shits.)
If really messed up the settings, likely will incur charges when telco send ppl down for troubleshooting.

yup. just tell them u want use your own router and not theirs. they will just tell u their support will end at the ONR :s22:

I tried to configure the ONR by myself but i cant log in haha. the username and password doesnt work lol