www.hardwarezone.com.sg

www.hardwarezone.com.sg (/)
-   Internet Bandwidth & Networking Clinic (https://forums.hardwarezone.com.sg/internet-bandwidth-networking-clinic-4/)
-   -   Singtel Mio TV with Netgear Orbi (https://forums.hardwarezone.com.sg/internet-bandwidth-networking-clinic-4/singtel-mio-tv-netgear-orbi-5717355.html)

Bengkoon 02-11-2017 10:08 PM

Singtel Mio TV with Netgear Orbi
 
Need some help to set up Orbi for Singtel IPTV. Managed to get the internet up and running after setting the VLAN tagging. However, can't seem to get the IPTV to go on although I have set the VLAN at 20 and Priority 4. Any advice, pls? Many thx in advance.

renfred89 02-11-2017 11:59 PM

Quote:

Originally Posted by Bengkoon (Post 111097771)
Need some help to set up Orbi for Singtel IPTV. Managed to get the internet up and running after setting the VLAN tagging. However, can't seem to get the IPTV to go on although I have set the VLAN at 20 and Priority 4. Any advice, pls? Many thx in advance.

Is singtel tv plugged into lan port 4?

Bengkoon 03-11-2017 06:24 AM

There are only 3 ports in the Orbi router, but the satellite has 4 ports. Will swapping the satellite over for the router do the trick? Can try this later.

renfred89 03-11-2017 07:40 AM

Then swap it to port 3? Usually it's port specific and manufacturers like to put it as last port.

If it's still not working, then u might need to reboot your orbi and try again..

Quote:

Originally Posted by Bengkoon (Post 111100536)
There are only 3 ports in the Orbi router, but the satellite has 4 ports. Will swapping the satellite over for the router do the trick? Can try this later.


flikmy 27-11-2017 11:41 AM

Quote:

Originally Posted by renfred89 (Post 111100987)
Then swap it to port 3? Usually it's port specific and manufacturers like to put it as last port.

If it's still not working, then u might need to reboot your orbi and try again..



Did this work in the end?

Btw, does using the orbi as a router instead of just an Access Point for Singtel provide anything extra? I'm assuming that connection speed when plugging the Orbi (as AP) through the Singtel wifi router won't really see much deterioration.

Randy2936 02-12-2017 11:21 PM

To set up a bridge for a VLAN tag group:

Launch web browser from a mobile device that is connected to your routerís network.
Enter orbilogin.com.
A login window opens.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
Select ADVANCED > Advanced Setup > VLAN/Bridge Settings.
Select the Enable VLAN/Bridge Group check box.
The page expands.
Select the radio button.
The selection expands.
Click the Add button.
The Add VLAN Rule page displays.
Name. IPTV
Internet VLAN ID. 10
Internet VLAN Priority. 0
IPTV VLAN ID (Astro). 20
IPTV VLAN Priority. 4
Specify the following settings:
Click the Add button.
The VLAN tag group is added.
Click the Apply button.
Your settings are saved.


All times are GMT +8. The time now is 04:28 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright © SPH Magazines Pte Ltd. All rights reserved.