HWZ Forums

Login Register FAQ Mark Forums Read

Singtel ONR AP Issues

Like Tree3Likes
Reply
 
LinkBack Thread Tools
Old 20-02-2018, 02:53 PM   #16
Arch-Supremacy Member
 
renfred89's Avatar
 
Join Date: Nov 2007
Posts: 16,568
Have you configured it to be an AP via gui?

Ac88u won’t work as router when connected to onr..

I already have the AC88U from my previous setup - 1GB plan via the ONT. now it’s a ONR and I can’t seem to get it to work.
renfred89 is offline   Reply With Quote
Old 20-02-2018, 03:57 PM   #17
Master Member
 
tungsten2's Avatar
 
Join Date: May 2000
Posts: 4,182
Hi greywolf8029, Please follow the below guide from Asus to set up the Access Point mode (AP mode) : https://www.asus.com/sg/support/FAQ/1015009/

Sent from 当断不断, 害人害己 using GAGT
tungsten2 is offline   Reply With Quote
Old 03-03-2018, 11:34 PM   #18
jtz
Junior Member
 
Join Date: Sep 2003
Posts: 1
Settings

We can use the AC88U as a router with the stupid new Singtel ONR but it means there will be 2 NATs active, and this is not good if you access your smart devices remotely (outside your home).

One reason it is not working when you change is IP conflict. the ONR DHCP is using 192.168.1.1-254 and your Asus is probably the same. Try changing to 192.168.2.1-254. Or just go to portal's left bottom menu, Administration and change to Acess point mode.

Update the firmware to 3.0.0.4.384_20379 also, all the AiMesh functionalities are there. For DDNS, you will lose it when your Asus turns into AP, so just setup it up in the ONR with the free one from dynu, the settings (for HUAWEI-HG8245-HG8346M-HG8045H) are:

Service Provider : dyndns-custom
WAN Connection : nas_0_38
Host Name : api.dynu.com
Server port : 8245 or 80

Use the IP Update Password as well.

In case someone doesn't know, default login to ONR is
user: root
password: admin

Cheers
__________________
[SIZE=1]Jeremy Tay[/SIZE]
jtz is offline   Reply With Quote
Old 10-03-2018, 11:09 PM   #19
Member
 
Join Date: Nov 2015
Posts: 173
Facing the same issue as TS. Was working fine till last night. No settings were hanged.

What should the default gateway for the access point be?
Masa27 is offline   Reply With Quote
Old 10-03-2018, 11:21 PM   #20
High Supremacy Member
 
Ah-Pin-Kor's Avatar
 
Join Date: Apr 2008
Posts: 39,353
Facing the same issue as TS. Was working fine till last night. No settings were hanged.

What should the default gateway for the access point be?
Default gateway should be the LAN IP of the ONR.
__________________
== the Neutralizer ==
Ah-Pin-Kor is offline   Reply With Quote
Old 10-03-2018, 11:53 PM   #21
Member
 
Join Date: Nov 2015
Posts: 173
I tried but internet was very slow, 0.08 mbps with 900 ping using Speedtest with iPhone.

Default gateway should be the LAN IP of the ONR.
Summary of my problems.

Basic info

ONR -> Switch (patch panel) -> APs

APs channels have been set to reduce interference and power adjusted to fair

ONR - 192.168.1.254
5 APs (default gateway values)
66u - 192.168.1.2 (0.0.0.0)
87u - 192.168.1.3 (0.0.0.0)
66u - 192.168.1.4 (192.168.1.254)
66u - 192.168.1.5 (192.168.1.254)
87u - 192.168.1.6 (0.0.0.0)

Was using VQ with this setup with no issue till around early Feb when I changed to ST. Still work perfectly fine till this morning.

During the period when I was using ST, I changed my MioTV setup boxes configuration as ADSL is ending soon.

Everything was setup by myself as ST engineer was afraid of damaging my CCTV equipment/wires.

At first all setup boxes did not work until ST engineer suggested clearing the OBM(not sure what is this) for 1 of the machine and advise me to call back to clear the other 2 after CNY.

9th March 2018, I called ST to clear the OBM for the remaining two boxes and went to sleep. Woke up today and face the following issues.

I tested all APs using speedtest app on iPhone with ST servers.
1) All 66u ping was above 900
2) speed started normal and went down to 0.00 values (e.g 0.08) during testing
3) upload speed face the same issue as point 2 but slightly better speed
4) have no issue with my 87u
5) WebUI for all APs have become slow randomly

I have tried resetting 1 of the APs but to no avail.

Anyone got any idea what went wrong?
Masa27 is offline   Reply With Quote
Old 11-03-2018, 12:12 AM   #22
Arch-Supremacy Member
 
xonix's Avatar
 
Join Date: Mar 2001
Posts: 10,689
I tried but internet was very slow, 0.08 mbps with 900 ping using Speedtest with iPhone.



Summary of my problems.

Basic info

Spoiler!


I have tried resetting 1 of the APs but to no avail.

Anyone got any idea what went wrong?
Are all your routers in AP Mode or Router mode set to different IPs ?
__________________
WTS Blu Life One X 2016 (16g)
WTS HTC 10 (32g)
xonix is offline   Reply With Quote
Old 11-03-2018, 12:14 AM   #23
Member
 
Join Date: Nov 2015
Posts: 173
All in AP mode

Are all your routers in AP Mode or Router mode set to different IPs ?
Masa27 is offline   Reply With Quote
Old 11-03-2018, 12:18 AM   #24
High Supremacy Member
 
Ah-Pin-Kor's Avatar
 
Join Date: Apr 2008
Posts: 39,353
@Masa27
obm is some kind of onboard memory?? Maybe the non volatile settings stored in nvram. Are all your MioTV set top boxes connected to the ONR?
Anyway, you have a lot of equipment and so you need to do some divide and conquer to narrow down the source of the problem.

Try to find a quiet time and disconnect everything from the ONR, then connect back a few devices at a time and at each stage, do some checks that they are all working properly before adding back some more devices. Looks like the last change was to the set top boxes so you may want to try to disconnect those first.
__________________
== the Neutralizer ==
Ah-Pin-Kor is offline   Reply With Quote
Old 11-03-2018, 02:08 AM   #25
Member
 
Join Date: Nov 2015
Posts: 173
Somehow I managed to get all back to how it was.

In case for those who have the same problem as me can try these steps.

I changed the default gateway for the APs to a random address and then back to the ONR’s address.

@Masa27
obm is some kind of onboard memory?? Maybe the non volatile settings stored in nvram. Are all your MioTV set top boxes connected to the ONR?
Anyway, you have a lot of equipment and so you need to do some divide and conquer to narrow down the source of the problem.

Try to find a quiet time and disconnect everything from the ONR, then connect back a few devices at a time and at each stage, do some checks that they are all working properly before adding back some more devices. Looks like the last change was to the set top boxes so you may want to try to disconnect those first.
Masa27 is offline   Reply With Quote
Old 14-03-2018, 08:44 PM   #26
Member
 
Join Date: Nov 2015
Posts: 173
Sadly I have some problem again after 3 days.

My APs have internet when using lan port. However when connecting via WiFi speed is very slow, sometimes even no internet connection.

Any guesses so I can google for solution?
Masa27 is offline   Reply With Quote
Old 14-03-2018, 09:33 PM   #27
Arch-Supremacy Member
 
renfred89's Avatar
 
Join Date: Nov 2007
Posts: 16,568
Sadly I have some problem again after 3 days.

My APs have internet when using lan port. However when connecting via WiFi speed is very slow, sometimes even no internet connection.

Any guesses so I can google for solution?
check that your wifi channel is not congested, and that there is no obvious interference.

if the above is okay, consider rebooting sometimes do help.

Also, it will be good if you can let us know which AP is it? are you connected to 2.4Ghz or 5Ghz?
renfred89 is offline   Reply With Quote
Old 14-03-2018, 11:45 PM   #28
Member
 
Join Date: Nov 2015
Posts: 173
All APs affected, both 2.4 & 5ghz.

All APs running 2.4ghz. Only 87u running 2.4 & 5ghz. Channels were chosen using analyzer app. Different levels channel 1,6,11.

I have rebooted many times. Even factory reset my APs; which did not work. I then factory reset my ONR also. Currently ONR is factory settings.

Been using VQ for 4 yrs with no issue. After changing ST problem started. Not sure what went wrong.

check that your wifi channel is not congested, and that there is no obvious interference.

if the above is okay, consider rebooting sometimes do help.

Also, it will be good if you can let us know which AP is it? are you connected to 2.4Ghz or 5Ghz?
Masa27 is offline   Reply With Quote
Old 15-03-2018, 08:10 AM   #29
Arch-Supremacy Member
 
renfred89's Avatar
 
Join Date: Nov 2007
Posts: 16,568
All APs affected, both 2.4 & 5ghz.

All APs running 2.4ghz. Only 87u running 2.4 & 5ghz. Channels were chosen using analyzer app. Different levels channel 1,6,11.

I have rebooted many times. Even factory reset my APs; which did not work. I then factory reset my ONR also. Currently ONR is factory settings.

Been using VQ for 4 yrs with no issue. After changing ST problem started. Not sure what went wrong.
I don't think the issue lies with ONR since you mentioned there is no issue with LAN? Did you try using LAN on AP?

I'm assuming you're using the singtel AP though. If it is, better call 1688 for them to check your AP if its functioning as expected..
renfred89 is offline   Reply With Quote
Old 15-03-2018, 10:16 AM   #30
Member
 
Join Date: Nov 2015
Posts: 173
Lan on APs no problem, only WiFi.

Singtel AP no problem, only my ASUS APs. Might have done some settings wrong but am unsure where.

Any settings I should take note?

I don't think the issue lies with ONR since you mentioned there is no issue with LAN? Did you try using LAN on AP?

I'm assuming you're using the singtel AP though. If it is, better call 1688 for them to check your AP if its functioning as expected..
Masa27 is offline   Reply With Quote
Reply
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ. Forum members and moderators are responsible for their own posts.

Please refer to our Terms of Service for more information.


Thread Tools

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On