manofsorrows
Master Member
- Joined
- Jan 22, 2015
- Messages
- 3,917
- Reaction score
- 645
Mous case also got warranty lor ....
iPhone 11/11 Pro Accessories Show Case Thread
- Thread starter xzr3b0rnzx
- Start date
newbie/virgin pasting TP SP
- iphone 11 with Spigen full screen TP from Souky
- issue: bubbles along screen edge and corners
ok... virgin TP sP job here. with the included alignment kit .. no issues. But I have lots of bubbles small ones and thin long stretches along the edges of the screen. corners too. gently pushing out doesn;t seems to work. So should i give it some time to sort itself out? Or take out and re-paste? Doesn't seems to have any dust under the glass which is a good thing.
So suggestions?
- iphone 11 with Spigen full screen TP from Souky
- issue: bubbles along screen edge and corners
ok... virgin TP sP job here. with the included alignment kit .. no issues. But I have lots of bubbles small ones and thin long stretches along the edges of the screen. corners too. gently pushing out doesn;t seems to work. So should i give it some time to sort itself out? Or take out and re-paste? Doesn't seems to have any dust under the glass which is a good thing.
So suggestions?
I do get them as well. Keep squeezing them out by rubbing towards the edges
If still can’t can lift up and use the dust sticker on the affected area and paste again.
If still can’t can lift up and use the dust sticker on the affected area and paste again.
finally... all done
iphone 11 with
- power support air jacket - rubber black
- spigen full screen TG SP
- spigen camera protector TG
overall feel is soft, grippy, still very slim and looks like a different phone to naked iphone 11
Notes:
1) getting the bubbles out was a pita! ... give it a few hours and most of the bubbles sorts itself out. then after that patiently massage the remaining bubbles out. alignment is perfect w the kit and looks like it is without any SP (for my old ageing eyes at least)
2) the spigen SP is SMOOTH! the coating is really power... no finger prints, no smudges!
3) with the SP on. the PSAJ screen lips are a hair (barely) protruding. so on the whole feel is almost flush.
4) there is a very small gap all around between SP and the casing for the screen, So there will be dust. Have a lens blower handy
5) contrary to what some have said, the casing does have a tinny bit of flex on the sides around the centre potion (for iphone 11), i suspect 11 pro may not have the issue and max will definitely have this flex especially if u grip it around the middle section. it is easy to remove. search for the video on youtube.
6) the spigen camera protector changes the look of the camera model quite a bit and i like it. But the camera protector does protrude very slightly from the casing. imho, this is highly optional. and if it drops off somehow... i may not buy another one. Also the camera protect surround is sticky and attracts dust (sticks to it)
very very happy with the casing and SP combo....
iphone 11 with
- power support air jacket - rubber black
- spigen full screen TG SP
- spigen camera protector TG
overall feel is soft, grippy, still very slim and looks like a different phone to naked iphone 11
Notes:
1) getting the bubbles out was a pita! ... give it a few hours and most of the bubbles sorts itself out. then after that patiently massage the remaining bubbles out. alignment is perfect w the kit and looks like it is without any SP (for my old ageing eyes at least)
2) the spigen SP is SMOOTH! the coating is really power... no finger prints, no smudges!
3) with the SP on. the PSAJ screen lips are a hair (barely) protruding. so on the whole feel is almost flush.
4) there is a very small gap all around between SP and the casing for the screen, So there will be dust. Have a lens blower handy
5) contrary to what some have said, the casing does have a tinny bit of flex on the sides around the centre potion (for iphone 11), i suspect 11 pro may not have the issue and max will definitely have this flex especially if u grip it around the middle section. it is easy to remove. search for the video on youtube.
6) the spigen camera protector changes the look of the camera model quite a bit and i like it. But the camera protector does protrude very slightly from the casing. imho, this is highly optional. and if it drops off somehow... i may not buy another one. Also the camera protect surround is sticky and attracts dust (sticks to it)
very very happy with the casing and SP combo....
Last edited:
Charlie_Zhan
Supremacy Member
- Joined
- Nov 17, 2013
- Messages
- 6,546
- Reaction score
- 558
you should have saved the money on spigen camera protector and bought the sapphire lens rim from imos or hoda instead.
hummm... from apple specs.."Sapphire crystal lens cover". so not really concerned about scratching the lens. But the surrounding glass... is a different matter...
But i agree with you. should have save the money and brought a proper type-c to lightning cable
Got em at which shop ?
all online.. qoo10.. go search.
where to find good, cheap and mfi certified type c to lightning cable?
baseus not mfi certified right? tried to find ugreen... but no good and cheap listing on qoo10.
any others to recommend? looking for long - 1m and short -25cm..
baseus not mfi certified right? tried to find ugreen... but no good and cheap listing on qoo10.
any others to recommend? looking for long - 1m and short -25cm..
Charlie_Zhan
Supremacy Member
- Joined
- Nov 17, 2013
- Messages
- 6,546
- Reaction score
- 558
bought my braided ugreen ones from taobao.
Charlie_Zhan
Supremacy Member
- Joined
- Nov 17, 2013
- Messages
- 6,546
- Reaction score
- 558
lol most of my packages already resumed shipping and the forwarder also received.
swee... i go look see look see
brought two no brand c to lightning cable for about 5 bucks... let see if it supports the full 18w pd charging... if yes.. will be the cheap cheap cable... if no and phone catches fire... hahahaha.. thats another story
balzebub
Supremacy Member
- Joined
- Dec 3, 2002
- Messages
- 5,751
- Reaction score
- 18
Anyone using the Apple charging case for 11?
Glariel
Banned
- Joined
- Feb 21, 2018
- Messages
- 26,720
- Reaction score
- 2,032
nope, don't find the need
Charlie_Zhan
Supremacy Member
- Joined
- Nov 17, 2013
- Messages
- 6,546
- Reaction score
- 558
you don’t have the phone of course don’t kind the need.
i have used the charging case for iphone 7 .... but not 11.
overall chraging case serves its purpose but.. and its a very big BUT
BUT the charging case keeps the phone at the 100% battery until it's own battery dies out.
end results is that the phone battery cui after 18months... i had to change the ip7 battery twice in the course of its life.
so yes it serves its purpose but at the expense of the phone's battery life.
overall chraging case serves its purpose but.. and its a very big BUT
BUT the charging case keeps the phone at the 100% battery until it's own battery dies out.
end results is that the phone battery cui after 18months... i had to change the ip7 battery twice in the course of its life.
so yes it serves its purpose but at the expense of the phone's battery life.
Glariel
Banned
- Joined
- Feb 21, 2018
- Messages
- 26,720
- Reaction score
- 2,032
black or clear no diff unless yours is other colour
my iPhone 11 black I use rhinoshield case
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts.
Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
