I have a strange SATA cable that acted weird.
Previously, it could only work with my HDD. If I plug it to a DVD drive while maintaining the same motherboard SATA port, the DVD drive does not get detected by BIOS.
Next, I experimented with plugging my HDD into different SATA port using the same cable. Plugging my HDD to SATA port 1 and port 2 on my motherboard, my HDD does not get detected by the motherboard. Only port 3 worked. It seemed to me that somehow my HDD must be plugged to SATA port 3 in order to get detected.
Sometimes when I vary the storage device (DVD drive/internal HDD) or the SATA port, it seemed to cause a short circuit and the motherboard refuse to even start. Like the PSU powers up for 5 seconds, case/CPU/PSU fans spinning, blank screen with no BIOS or system check, then suddenly the PSU power cuts off. No time to even beep error codes from the BIOS check. I am surprised a bad SATA data cable could cause the PSU/motherboard to shut itself down.
It was probably in the middle of going totally bad. Now it is totally dead. Even plugging my HDD to the SATA port 3 that used to work no longer works. I swapped with a new spare SATA cable and both the optical drive and HDD both get found by the motherboard BIOS.
Have you guys ever encountered a SATA cable gone bad or only works with certain SATA port or storage drive?
Previously, it could only work with my HDD. If I plug it to a DVD drive while maintaining the same motherboard SATA port, the DVD drive does not get detected by BIOS.
Next, I experimented with plugging my HDD into different SATA port using the same cable. Plugging my HDD to SATA port 1 and port 2 on my motherboard, my HDD does not get detected by the motherboard. Only port 3 worked. It seemed to me that somehow my HDD must be plugged to SATA port 3 in order to get detected.
Sometimes when I vary the storage device (DVD drive/internal HDD) or the SATA port, it seemed to cause a short circuit and the motherboard refuse to even start. Like the PSU powers up for 5 seconds, case/CPU/PSU fans spinning, blank screen with no BIOS or system check, then suddenly the PSU power cuts off. No time to even beep error codes from the BIOS check. I am surprised a bad SATA data cable could cause the PSU/motherboard to shut itself down.
It was probably in the middle of going totally bad. Now it is totally dead. Even plugging my HDD to the SATA port 3 that used to work no longer works. I swapped with a new spare SATA cable and both the optical drive and HDD both get found by the motherboard BIOS.
Have you guys ever encountered a SATA cable gone bad or only works with certain SATA port or storage drive?
