[Cooler Master] MasterBox NR200P System Case - Introduction

[Richliao]

Assembled an itx inside node 202 before and decided will never ever assemble another itx machine haha...

 

[ZerozeroZero]

Can't find a good GPU brace to prevent GPU sag in this case. Any suggestions?

Stuff paper between the GPU shroud and the fans beneath.

 

[Richliao]

Can't find a good GPU brace to prevent GPU sag in this case. Any suggestions?

Lego brick lor

 

[nuahster]

Can't find a good GPU brace to prevent GPU sag in this case. Any suggestions?

just find a resting spot that doesn't interfere with any GPU fan or bottom mounted fans, use folded paper/cardboard, or use styrofoam, rubber foam any packaging material.
something like this video @7:23 mark, different case but same principle.
https://youtu.be/96rmIYG1fp4?t=437

if you want something that looks nicer, can go DIY shops or Daiso, get small wooden blocks or metal brackets and prop up the GPU in the same manner. take some time to file them down to correct height if needed.

 

[arvinsim]

Thanks for the advice

Gonna go Daiso then

 

[Gixxerfied]

Assembled an itx inside node 202 before and decided will never ever assemble another itx machine haha...

I went from a Node202 to Rajintek Ophion and now NR200...

Out of the 3, NR200 is the most easy to built..

 

[crystalnox]

Still waiting for SF750 availability for this case.

 

[hafiz116]

Here is a follow up video to the build series to answer comments and questions raised,...

 

[Burpharvest]

Hi i am also intending to build in the NR200P, right now i am just lacking GPU (3070) , CPU (3600xt/5600x) and PSU (SF750).

Very interested in Aorus master 3070, would like to ask whether will slim noctua 12x15 fans fit on the bottom after fitting the GPU in?

 

[hafiz116]

Hi i am also intending to build in the NR200P, right now i am just lacking GPU (3070) , CPU (3600xt/5600x) and PSU (SF750).

Very interested in Aorus master 3070, would like to ask whether will slim noctua 12x15 fans fit on the bottom after fitting the GPU in?

Yes the slim fans will fit if you're looking at the 3070 GPU. Even with this thick 2.9 slot card I can get a pair of slim profile fans below the GPU which I am considering installing to see how much I can drop the GPU temps.

Also if your not planning to vertical mount the GPU and side mount an AIO then I would advise to buy the NR200 non P as it cost less. The additional parts is the 2 included fans, GPU raiser cable and the tempered glass side panel.

If you're going to air cool the CPU and want the TG panel only then consider the NR200P.

 

[t258jgn]

Anyone can do 3D printing for

Cooler Master NR200 ATX PSU Bracket?


I only see Shopee Msia selling
(https://shopee.com.my/3D-Printed-AT...200P-Low-and-High-Mount-i.30388621.3164160495)

 

[Psycovirus]

Cooler Master MasterBox NR200P Sakura Limited Edition
200 pieces only. Already sold out though.

 

[watzup_ken]

Cooler Master MasterBox NR200P Sakura Limited Edition
200 pieces only. Already sold out though.

Looks great. I think this will be very attractive for ladies. Alternatively, I think is possible to get th casing skinned.

 

[tatose]

I went from a Node202 to Rajintek Ophion and now NR200...

Out of the 3, NR200 is the most easy to built..

Built 3 different ITX desktops liao, think too much trouble than it is worth. Nowadays it's Define C or Meshify C if I want small form.

 

[t258jgn]

Anyone has fitted NOCTUA NH-U12S into the Non-Window NR200?

 

[LIN_JOEL]

Anyone has fitted NOCTUA NH-U12S into the Non-Window NR200?

https://ncc.noctua.at/coolers/NH-U12S-9/cases/Cooler Master?q=NR200

Cooler Master	MASTERBOX NR200		Insufficient clearance
Cooler Master	MasterBox NR200P		Insufficient clearance
Cooler Master	NR200		Insufficient clearance

From their web info is cannot, but their info not accurate sometimes.

My Msi Z590i web say C14s cannot fit, but reddit got a user confirm it fits and when I got mine it got no issue.
However the C14s show compatible with Ncase but the 140mm fan block PSU bracket and I have to use a 120mm fan instead....

 

[ragnarok95]

Anyone has fitted NOCTUA NH-U12S into the Non-Window NR200?

U12A can fit. Is U12S same height?

 

[ragnarok95]

https://ncc.noctua.at/coolers/NH-U12S-9/cases/Cooler Master?q=NR200

Cooler Master	MASTERBOX NR200		Insufficient clearance
Cooler Master	MasterBox NR200P		Insufficient clearance
Cooler Master	NR200		Insufficient clearance

From their web info is cannot, but their info not accurate sometimes.

My Msi Z590i web say C14s cannot fit, but reddit got a user confirm it fits and when I got mine it got no issue.
However the C14s show compatible with Ncase but the 140mm fan block PSU bracket and I have to use a 120mm fan instead....

C14S can fit cos the default orientation is fan mount at the bottom. I just got my C14S too, i mount it on the bottom. The C14S is higher than my previous C14.