Error Code 00. Can't Boot Up

[Vincym]

Just completed my new build. Last friday it was ok...boot up, installed window, no problem.
All my parts are new except PSU.

Today when I turn on my PC, motherboard shows error 00. Basically no display, not even bios.

I have tried..
a. remove the ram and boot
b. remove ram and reinstall only one stick
c. check all PSU connection.
d. confirm monitor and dsplay cables are working

I suspect is CPU error. If I remove my H100i liquid cooler, and inspect my CPU for bent pin, do I need to reapply thermal paste when I reseat the liquid cooler? This H100i cooler is new and just installed 4 days back.

PC spec on the right

Any other suggestion how can I troubleshoot? Thanks in advance.

 

[ondooy]

it's a dead hardware...
need to re-test every hardware you have..
1.) psu
2.) gpu
3.) mem
4.) mobo bent pins
5.) cpu

for testing purpose you don't need to re-apply thermal paste as long as your only on the uefi/bios screen.

 

[Allanlee82]

recently i was playing (overclocking tweak) with the bios and somehow i got the 00 error also
what i do is use the physical button to clear cmos than it can start up again

 

[ZrE0_Cha0s]

yes u will still need to reapply thermal paste.

 

[Vincym]

Thank you guys.

Tried all above

Will inspect CPU pins tonight. Otherwise have to bring to expert Mr. Nigel at SLS for troubleshoot liao

 

[wacko]

have you tried clearing CMOS by pressing the red CLR_CMOS button on the motherboard?

 

[Vincym]

Hi Wacko, tried. No dice :/

 

[hlots123]

suspect bad board...

but also check tat nothing is pressed against the bios flashback button at the rear i/o panel
and toggle the psu rocker switch off/on