H80 vs H100 (closed case + open gpu cooler)

superzheny

Senior Member
Joined
Dec 20, 2011
Messages
545
Reaction score
11
Obviously a 240mm radiator will win the 120mm radiator, however most of these test are done in an open bench setup. What about in a closed case situation with an open styled gpu dumping heat into the case at the same time (normal gaming conditions)?

H80 (or equivalent) will be installed at top rear as exhaust.
H100 (or equivalent) will be installed at top as exhaust.
 

monikernemo

Supremacy Member
Joined
Oct 23, 2014
Messages
7,268
Reaction score
1
no head no tail :s11:

Not much difference from open bench. I doubt that the air around the GPU will be heated up to a large extent because air itself is a bad conductor of heat. The AIO wont be affected.

Anw if you concerned about the thermal transfer, just set to intake for radiator. Rear fan for exhaust.
 

Toby88

Senior Member
Joined
Jun 6, 2006
Messages
2,102
Reaction score
0
Personally, I'd say that setting rad fans to exhaust would be ideal in most situations.

But then again, it's always good to try out the different configs of fan placements (exhaust or intake) in your own rig so as to see which is better.

If you are going for higher OCs, then 240mm and above would give significantly better temps.
 

superzheny

Senior Member
Joined
Dec 20, 2011
Messages
545
Reaction score
11
my question is not about exhaust or intake. Reviews on CPU coolers you see out there are mostly performed on open benches or with only a cpu stressor running. Thats not real life gaming as an open style GPU (aka a non-blower) dumps heat into the case. This heat rises to the top.

A 240mm exhaust at the top will preferentially suck out the hot air from the GPU, thereby potentially negating benefits of the extra radiator surface area.

A top rear mounted 120mm radiator will suck out less of the hot air, which I conclude as I notice the air coming out of my 2x120mm top exhaust is hotter than the air from my H80 (top rear exhaust) during gaming. For the record, GPU temps are mid 70s, cpu temps high 50s.

So I am wondering if there's any significant benefits to a top 240mm vs a top rear 120mm in a real life gaming scenario.
 

trento

Great Supremacy Member
Joined
Sep 11, 2007
Messages
66,469
Reaction score
3,488
my question is not about exhaust or intake. Reviews on CPU coolers you see out there are mostly performed on open benches or with only a cpu stressor running. Thats not real life gaming as an open style GPU (aka a non-blower) dumps heat into the case. This heat rises to the top.

A 240mm exhaust at the top will preferentially suck out the hot air from the GPU, thereby potentially negating benefits of the extra radiator surface area.

A top rear mounted 120mm radiator will suck out less of the hot air, which I conclude as I notice the air coming out of my 2x120mm top exhaust is hotter than the air from my H80 (top rear exhaust) during gaming. For the record, GPU temps are mid 70s, cpu temps high 50s.

So I am wondering if there's any significant benefits to a top 240mm vs a top rear 120mm in a real life gaming scenario.

240 will have better cpu temps for sure assuming conditions are the same.

benefits are simply better exhausting of heat cos of the extra fan.

but if u mainly wan a slightly cooler cpu temp, intake is the way to go. u can still add exhaust fans elsewhere.
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top