Installing Swiftech H220-X

K

kevince

Junior Member
Joined
Mar 15, 2001
Messages
90
Reaction score
0
The plastic film with the sticky pad is to help with keeping the backplate in place. Not that it helps that much though.
I had to use 1 hand to hold on to the backplate behind the motherboard, 2nd hand to place the water block on top of the cpu and a third hand to screw the 4 screws to the backplate. Only after screwing the water block to the backplate will it hold tight. I'm using LGA1151 socket.
 
Last edited:
Z

zystttt

Member
Joined
Sep 6, 2010
Messages
346
Reaction score
0
kevince said:
The plastic film with the sticky pad is to help with keeping the backplate in place. Not that it helps that much though.
I had to use 1 hand to hold on to the backplate behind the motherboard, 2nd hand to place the water block on top of the cpu and a third hand to screw the 4 screws to the backplate. Only after screwing the water block to the backplate will it hold tight. I'm using LGA1151 socket.
Click to expand...

thanks for the reply, i got desperate and decided to tape the backplate to the mobo while i screw the mobo back into the chassis, then throw on the cpu block..
 
You must log in or register to reply here.
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top