Linksys Router on Singtel

[homeyyy]

Hi guys, I recently bought Linksys Router EA7500 as my room was getting really bad wifi signal from the default Singtel router (Singtel WiFi Gigabit Router AC1900). I unplugged the old Singtel router and successfully installed my Linksys router. However, I am unable to access MioTV. I tried to run both routers by connecting them both to Singtel ONT but only the router plugged into LAN 1 is working and all other LAN ports do not allow internet access.

Is there a way to run both routers in 1 LAN port or a workaround to plug both routers into the ONT?

Thanks in advance.

 

[ZrE0_Cha0s]

Well the Linksys router needs to setup the clan so that u can get it work with Singtel ONT. But if u want to do multiple out on ONT...I think can't work, unless u requested it? Anyway if you want u can consider setting that Linksys as AP to get both work.

 

[homeyyy]

Well the Linksys router needs to setup the clan so that u can get it work with Singtel ONT. But if u want to do multiple out on ONT...I think can't work, unless u requested it? Anyway if you want u can consider setting that Linksys as AP to get both work.

Okay thank you. I shall try to see if this works.

 

[miloaisdino]

Okay thank you. I shall try to see if this works.

Set vlan 20 priority 4 for lan port 4. Disable igmp snooping. Then connect miotv as usual to lan port 4 of yr linksys

 

[renfred89]

Ea7500 should have a singtel preset. Just make sure you choose the right one..

Hi guys, I recently bought Linksys Router EA7500 as my room was getting really bad wifi signal from the default Singtel router (Singtel WiFi Gigabit Router AC1900). I unplugged the old Singtel router and successfully installed my Linksys router. However, I am unable to access MioTV. I tried to run both routers by connecting them both to Singtel ONT but only the router plugged into LAN 1 is working and all other LAN ports do not allow internet access.

Is there a way to run both routers in 1 LAN port or a workaround to plug both routers into the ONT?

Thanks in advance.

A Samsung Connections Member. Posted with Samsung Galaxy S9+ HardwareZone Forums app

 

[WWE_Fan]

Does it work by plugging to LAN port 4?

 

[homeyyy]

Ea7500 should have a singtel preset. Just make sure you choose the right one..

A Samsung Connections Member. Posted with Samsung Galaxy S9+ HardwareZone Forums app

I used the Singtel preset but couldn't work. I guess I'll just use the Linksys as a AP

 

[homeyyy]

Does it work by plugging to LAN port 4?

Nope it does not

 

[tungsten2]

Hi guys, I recently bought Linksys Router EA7500 as my room was getting really bad wifi signal from the default Singtel router (Singtel WiFi Gigabit Router AC1900). I unplugged the old Singtel router and successfully installed my Linksys router. However, I am unable to access MioTV. I tried to run both routers by connecting them both to Singtel ONT but only the router plugged into LAN 1 is working and all other LAN ports do not allow internet access.

Is there a way to run both routers in 1 LAN port or a workaround to plug both routers into the ONT?

Thanks in advance.

did you set as mentioned in Linksys website

Source : https://www.linksys.com/se/support-article?articleNum=141597