new com error need help!!!

[XiangKaPager]

guys i really need some help here. i'm at my wits end already.

i've recently just build my new com ( spec to the right).

after i successfully install my windows 7, my application have been randomly crashing once i started to load into windows. sometimes its skype, firefox, .net service provider, AMD Catalyst™ Control Center, even my windows update also fail to install.

i've tried to use sfc /scannow command but it always tell me fail to verify or unable to repair corrupted file. i also used another pc to install windows7 and fully update on my ssd with no hiccups.

i've already reformated my ssd god know how many times. anybody can advise me what should i do. please do help me and thanks in advance!

 

[tensaixp]

Check if your graphic card is flexing. you can try booting with your tower on the side and not vertically up as the graphic card will not flex. If it boots fine and doesn't crash, its your graphic card flexing. use a cable tie support the overhanging end.

 

[XiangKaPager]

Application still crashing also even after lying down my cpu. Is there anyway to test gor faulty sata port?

 

[gs]

Could be a faulty ram..if u got two pcs try using one by 1 and try..if still facing problem u can bring to my humble corner

 

[fleas1]

is there any error when you install windows? like reinsert disc, cannot find file....etc

 

[precise]

Experience similar issue. For my case, was faulty ram. I spent 2 weeks to zoom into the issues with various tests.
suggest u to RMA your ram even if it is brand new. Dun waste time.

 

[XiangKaPager]

Could be a faulty ram..if u got two pcs try using one by 1 and try..if still facing problem u can bring to my humble corner

ok will do a memtest to try isolate the problem.

is there any error when you install windows? like reinsert disc, cannot find file....etc

nope it install successfully,i've also use different copy via dvd and usb to try installing.

Experience similar issue. For my case, was faulty ram. I spent 2 weeks to zoom into the issues with various tests.
suggest u to RMA your ram even if it is brand new. Dun waste time.

ok will do as you say after i do the test. any test to recommend to confirm the issue?


will update you guys again. thanks!

 

[fleas1]

good luck!

do this, if your memtest checks out fine:
check in bios if your memory is running the correct timings and voltage:
http://www.gskill.com/en/finder?cat...rop_6=0&prop_3=0&prop_4=0&prop_1=0&series=264

if not just use the XMP profile.

I had a pair of ram that when set to auto, set it to 1.5v when it suppose to be 1.65volts

using XMP profile will set according to its correct timing

 

[XiangKaPager]

Guys. I've did my memtest scan and one of the ram stick have more then 65535 error. While the other ram have 0 error. So do i need to bring both ram to RMA? Or just the faulty ram.

 

[jtjt00]

Both, since they are a kit.

 

[XiangKaPager]

Both, since they are a kit.

wah if they no stock to 1:1 exchange then i no pc to use already.

 

[BlackWing1977]

Lucky I never hoot G.Skill...

 

[XiangKaPager]

i have RMA my ram at corbell. thumbs up for the service guy whom i called to ask for stock availability before heading now. he ask for the exact product no and told me stock quite limited and ask me to head down asap. thanks corbell and fellow hwzer for the help.

 

[precise]

If u have time constraints to go down for RMA, call them and let them know u will send via ta q Bin. When ready, same thing, send ta q Bin to collect. This was what I did. Back then was $12 for both ways. Save time and cover transport cost.