Newly built rig no display

[nexusRAGER]

My bro just built his rig. When booted everything running but just no display. Mobo pointed out is cpu issue so i swapped his cpu out with mine but problem still there.

Anything else could be the problem? He most likely bringing the motherboard down to corbell later on.. While he is removing his cpu he accidentally bent 2 pins was able to move it back abit.

TIA

 

[ZrE0_Cha0s]

so whats your connections like?

Onboard gpu to monitor by HDMI? or could u try a discrete gpu with hdmi or other ports and see?

 

[nexusRAGER]

so whats your connections like?

Onboard gpu to monitor by HDMI? or could u try a discrete gpu with hdmi or other ports and see?

both can't. tried to change to my 970 also no avail. USB port no power to keyboard

 

[ZrE0_Cha0s]

both can't. tried to change to my 970 also no avail. USB port no power to keyboard

checked all connections are properly slots in? rams, mobo connector etc.

swap between psu and see.

if really nothing works ask for replacement from shops or the distro (whichever comes 1st.)

 

[nexusRAGER]

checked all connections are properly slots in? rams, mobo connector etc.

swap between psu and see.

if really nothing works ask for replacement from shops or the distro (whichever comes 1st.)

Swap ram and ssd no help.

yeap he went to corbell and ask for replacement, not sure will reject cause he accidentally bent one or two pins not so obvious though

 

[nexusRAGER]

WAH corbell damn nice! They helped him bent back the pins. Good service unlike ban leong

tested mobo no issue liao later test again.

 

[xiaozozo]

make sure motherboard (24pin) and cpu (8pin) psu connectors are plugged in.

 

[Elijahonli]

could be the bent pins...