[Official] Plextor SSD discussion & events thread

How would you rate your Plextor SSD?


  • Total voters
    72

gld998

High Supremacy Member
Joined
Feb 21, 2008
Messages
38,693
Reaction score
2,463
Momentary mistakes, put the test picture, sorry about that.:s34:
Correct picture as below.
FA570900_2013%20Sitex.jpg

Please Visit Booth NO.6B70
Cybermind Computerhouse Pte Ltd

how does this rebate work? trade in? what should i do?:D
 

cllai

Member
Joined
Apr 12, 2001
Messages
130
Reaction score
0
Hi Plextor,

I just bought a M5 Pro Xtreme 256GB recently and have issues accessing the SSD in Plextools.

I installed the SSD (fw 1.05) on a Asus P5Q Pro mobo (fw 2102) and using Plextool 1.1.1 and fresh Windows 7 SP1 installation. The mobo BIOS is in RAID mode (I need this to RAID1 my regular HDDs).

Does running the SSD in RAID mode affect Plextools?

When I start Plextools for the first time:
11aajye.jpg


When I close and start Plextools again:
2wpp3sg.jpg

1ifwpl.jpg

20fz2gh.jpg

11h7zg9.jpg

345lmaw.jpg


Thanks for any info.
 

PLEXTOR

Storage Clinic 1 Thread
Joined
Jan 11, 2013
Messages
78
Reaction score
0
Hi Plextor,

I just bought a M5 Pro Xtreme 256GB recently and have issues accessing the SSD in Plextools.

I installed the SSD (fw 1.05) on a Asus P5Q Pro mobo (fw 2102) and using Plextool 1.1.1 and fresh Windows 7 SP1 installation. The mobo BIOS is in RAID mode (I need this to RAID1 my regular HDDs).

Does running the SSD in RAID mode affect Plextools?

When I start Plextools for the first time:
11aajye.jpg


When I close and start Plextools again:
2wpp3sg.jpg

1ifwpl.jpg

20fz2gh.jpg

11h7zg9.jpg

345lmaw.jpg


Thanks for any info.

Hi ,

Please allow us to get back to you as soon as we refer your case to the technical department.

Thank you
 

rarenick

High Supremacy Member
Joined
Jul 12, 2008
Messages
26,307
Reaction score
3,732
I have upgraded my ssd and now have extra 128gb m5pro to sell. Pm me if interested. Looking at $120 for this very underutilized ssd.
 

PLEXTOR

Storage Clinic 1 Thread
Joined
Jan 11, 2013
Messages
78
Reaction score
0
Hi Plextor,

I just bought a M5 Pro Xtreme 256GB recently and have issues accessing the SSD in Plextools.

I installed the SSD (fw 1.05) on a Asus P5Q Pro mobo (fw 2102) and using Plextool 1.1.1 and fresh Windows 7 SP1 installation. The mobo BIOS is in RAID mode (I need this to RAID1 my regular HDDs).

Does running the SSD in RAID mode affect Plextools?

When I start Plextools for the first time:
11aajye.jpg


When I close and start Plextools again:
2wpp3sg.jpg

1ifwpl.jpg

20fz2gh.jpg

11h7zg9.jpg

345lmaw.jpg


Thanks for any info.

Hello,

Please be informed that Plextool does not support RAID setup as of now due to the lack of RAID users in the early days of SSD.

However, our engineers have started to pay attention to this issue and are currently working for a new version of Plextool with RAID support. We hope to launch the new Plextool as soon as it is completed and tested.

Apology for the inconvenience caused and we wish you a happy new year!
 

SPEED

Supremacy Member
Joined
Jan 1, 2000
Messages
28,911
Reaction score
305
New Plextor M5 Pro firmware is out!!!
Version 1.06

Downloads - Firmware

Changelog

This firmware revision improves:
1. Drive compatibility with Lenovo/Dell NB.
2. Drive health on platform which supports DEVSLP.
3. Drive stability when executing GC and S.M.A.R.T feature.
4. Data accuracy and error recovery capability.
5. Read and write Performance consistency in some specific platforms.

;););)
 

wilflare

Supremacy Member
Joined
Jun 1, 2002
Messages
9,903
Reaction score
25
I just updated my Plextor M5 Pro 128GB to Firmware 1.06. After not using the PC for a few hours, the system does not detect the SSD on boot. The BIOS shows "Not Detected". I have to leave the computer on the BIOS screen for 10-15mins and then reboot before it is finally detected.

My motherboard is Asrock B85M-Pro4. Any ideas?
Tried installing PlexTools - all green
Asrock Mobo on latest BIOS as well
Windows 8.1 Pro - latest drivers, etc all installed
 

woofwoof75

Junior Member
Joined
Aug 18, 2003
Messages
5
Reaction score
0
Totally unusable M6 Pro, both 128 GB and 256 GB

Don't mislead by all these great performance this product shown on various sites doing speed test... it is just a camouflage of your endless nightmares! I was lure into their performance and 5 year warranty!

I bought a M6 Pro 256 GB SSD thinking to upgrade my 5 year old iMac to run faster, in the end it gave me endless nightmare, endless worries! Can't imagine how many times have I clone back and forth to restore and backup the whole system, now I'm back on the original iMac 3.5" HDD.

I also decided to buy M6 Pro 128 GB (before all these nightmare begin) to put inside my old HP Netbook thinking to boost the system too...

Ended up now both of these SSD give me the same headache, always have this file system error... doing FSCK with lots of errors... and other times it will just totally unusable and force me to reformat and start from zero without giving a chance to repair and backup my data.

At first I tot it is not Mac compatible, then the one in netbook running Windows 7 also the same!!!

I've send both for warranty (at separate time) at company called "Convergent" something... they guy not very happy to hear I said it failed again... said they will not give one to one replace, it has to be sent to TW and come back take months?!?!

I've done all the many versions of firmware upgrades, it doesn't fix a tiny bit of the file system error problems.

I also email Plextor.com they dun bother to reply? Now I have 2 of these SSD, wasted almost $400 on 2 piece of useless silicon wrapped in metal case!

Take it as a sign of a fail product.
 
Last edited:

woofwoof75

Junior Member
Joined
Aug 18, 2003
Messages
5
Reaction score
0
I've been looking for solution to fix this darn SSD! Finding any unlucky soul who has similar unfortunate encounter with a fix. Or should I CASE? ******************
 
Last edited:
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top