PC power button blinks cant boot

twopixel

Junior Member
Joined
Jan 1, 2003
Messages
40
Reaction score
2
Using ASUS G10AC for quite sometime till one day when switching on, power button starts to blink but not able to boot nothing on the screen, even when changing CMOS batt and taking out everything unplugging everything except with a single ram. Result still the same when power on power button blink but not booting. Could this be a failure of psu if so can anyone recommend reasonable price with same dimension of psu to fit the casing, as Im not sure is this the failure of present psu if is not i will be wasting money on new psu.
The defaultpsu for G10AC is delta_dps500ab6_a_500w.
 

naked123

Supremacy Member
Joined
Feb 16, 2010
Messages
7,645
Reaction score
1,011
did you replace your motherboard? cos last time you said your mobo temps very high.

if not i would suggest replacing the entire pc lol
 

twopixel

Junior Member
Joined
Jan 1, 2003
Messages
40
Reaction score
2
did you replace your motherboard? cos last time you said your mobo temps very high.

if not i would suggest replacing the entire pc lol
Hey you still remember, the temp was high when I used a few software to measure but when I use an infrared temp gun it has different reading which is alot lower so i suspect the temp measurement from the software must be a faulty sensor on mobo.
 

tsteo77

Senior Member
Joined
Oct 28, 2011
Messages
1,542
Reaction score
216
Hey you still remember, the temp was high when I used a few software to measure but when I use an infrared temp gun it has different reading which is alot lower so i suspect the temp measurement from the software must be a faulty sensor on mobo.
Blinking of power button and not able to boot up might be due to faulty motherboard as what @naked123
mentioned as you seen to have temperature issue with it. Infrared red temperature gun are for measuring surface temperature. Measuring software are more accurate for measuring temperature of computer components.

As for psu, your current model is hard to find, since is almost the same as standard ATX ps/2 psu. You can try
a difference one.
 

init00

Member
Joined
Mar 6, 2021
Messages
426
Reaction score
87
i h ave the same issue in the past. and the root cause is faulty RAM. I removed the RAM (i have two RAMs) and no such issue anymore.
 

twopixel

Junior Member
Joined
Jan 1, 2003
Messages
40
Reaction score
2
Everything works until when I started dusting off thick dust from motherboard and PSU by nippon paint brush, I even take out the fan from PSU to brush off. Al these I had done in the past but when i fixed back everything, PSU working fan is spinning is only power button from the pc starts blinking but not booting. I have been browsing online for answers it narrow down either PSU was damaged I may brush off too hard on the capacitor or mobo was damaged. But I need a second opinion from anyone who encountered the power button blinking but nothing on screen.
 

Nefalrin

Banned
Joined
Dec 4, 2018
Messages
4,459
Reaction score
2,199
Everything works until when I started dusting off thick dust from motherboard and PSU by nippon paint brush, I even take out the fan from PSU to brush off. Al these I had done in the past but when i fixed back everything, PSU working fan is spinning is only power button from the pc starts blinking but not booting. I have been browsing online for answers it narrow down either PSU was damaged I may brush off too hard on the capacitor or mobo was damaged. But I need a second opinion from anyone who encountered the power button blinking but nothing on screen.
Never use a brush to clean your pc components. It is very dangerous.
Get an electric leaf blower instead like in the video.




More powerful ones.

Blow the components like once per month for dust maintenance. I get the least powerful ones from shopee at 40 bucks for the purpose of long term PC maintenance and for other household cleaning purposes. Doing so, you do not need to dismantle your pc parts which risks problems you are seeing now.

If your power is blinking then you may have short-circuit the motherboard or PSU. If you are using a full modular PSU, you can easily replace one and check. My guess is either your motherboard or PSU that is causing the problem.

If everything not working then have to take to PC shop.
 
Last edited:

hao_jun

Senior Member
Joined
Sep 25, 2007
Messages
941
Reaction score
139
Everything works until when I started dusting off thick dust from motherboard and PSU by nippon paint brush, I even take out the fan from PSU to brush off. Al these I had done in the past but when i fixed back everything, PSU working fan is spinning is only power button from the pc starts blinking but not booting. I have been browsing online for answers it narrow down either PSU was damaged I may brush off too hard on the capacitor or mobo was damaged. But I need a second opinion from anyone who encountered the power button blinking but nothing on screen.
Few weeks ago, I'm having the same issue as you on my wife's pc using b350i mobo with 3200g cpu. Power button blinking but cannot boot.

At first thought is PSU problem. Using paper clip test, the PSU fans start to spin and all my RGB fans power up. So PSU not the problem.

Ordered a cheap A520i from Amazon and replaced the mobo and everything back to normal.
 

twopixel

Junior Member
Joined
Jan 1, 2003
Messages
40
Reaction score
2
Few weeks ago, I'm having the same issue as you on my wife's pc using b350i mobo with 3200g cpu. Power button blinking but cannot boot.

At first thought is PSU problem. Using paper clip test, the PSU fans start to spin and all my RGB fans power up. So PSU not the problem.

Ordered a cheap A520i from Amazon and replaced the mobo and everything back to normal.
My greatest fear is to replace mobo and mine is intel LGA1150 Intel Core i7-4770 3.4GHz, no idea where and what model mobo to get sigh.
 

naked123

Supremacy Member
Joined
Feb 16, 2010
Messages
7,645
Reaction score
1,011
My greatest fear is to replace mobo and mine is intel LGA1150 Intel Core i7-4770 3.4GHz, no idea where and what model mobo to get sigh.

i would suggest getting 2nd hand cpu, rams and a brand new motherboard
 

twopixel

Junior Member
Joined
Jan 1, 2003
Messages
40
Reaction score
2
This might help you > https://www.msf.gov.sg/what-we-do/comcare :)
It's wise not to be too save when come to electronics/electrical items, you end up paying more. Discard your computer
if it's already spoiled.
Appreciate your thought, I just need to find a better suitable than the default H87MPRO mobo to replace using back same ram n cpu that all as everything else is working. Not going to spend alot more than a replaced mobo when all parts are still working.
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top