Recommend spacious ATX casing with PSU

turboo

Senior Member
Joined
Jun 30, 2011
Messages
993
Reaction score
9
Preferred specs:

- ultra spacious (GPU/HDD won't touch each other when I slide out the HDDs)
- have USB3.1 headers with jack
- at least 2 x 2.5" HDD cage and 2 x 3.5" HDD cage
- easy-to-maintain air filters
- <$150 if possible

For PSU:
- the most RELIABLE brand
- 600-650w range
- Bronze rating is fine
- Modular a plus

Is PCT still the place to go for buying case and PSU?
 

gld998

High Supremacy Member
Joined
Feb 21, 2008
Messages
38,410
Reaction score
2,330
HAF X.. 2nd hand can get ard $60. I manage to get 3 sets from 60 to 80(delivery)
 

singupingu

Supremacy Member
Joined
Jan 19, 2016
Messages
6,939
Reaction score
3

FlipGor

Member
Joined
Jul 19, 2017
Messages
285
Reaction score
0
Preferred specs:

- ultra spacious (GPU/HDD won't touch each other when I slide out the HDDs)
- have USB3.1 headers with jack
- at least 2 x 2.5" HDD cage and 2 x 3.5" HDD cage
- easy-to-maintain air filters
- <$150 if possible

For PSU:
- the most RELIABLE brand
- 600-650w range
- Bronze rating is fine
- Modular a plus

Is PCT still the place to go for buying case and PSU?

For the PSU, can consider a seasonic M12 620W, Full modular, 620w and wont break the bank.

If you know exactly what you are looking for then can always head to other stores like tradepac for lower prices. PCT is more for people new to DIY who not experienced with hardware market
 

lifeishard

Supremacy Member
Joined
Apr 30, 2012
Messages
5,623
Reaction score
7
Corsair 760T, scare you no space only and it's not cheap.

Edit: ps, did not see your requirement of below $150.
 
Last edited:

shadow84

High Supremacy Member
Joined
Apr 15, 2009
Messages
34,286
Reaction score
420
Do look at his 5th point abt his budget... Define R5 could be a good choice.
 

-Synchronicity-

Senior Member
Joined
Apr 29, 2012
Messages
2,463
Reaction score
198
Define s or the newer define c.

If either cases the gpu/hdd can even sniff each other, i will call u my god
 

tmfwy

Supremacy Member
Joined
Jun 3, 2000
Messages
7,448
Reaction score
6
Preferred specs:

- ultra spacious (GPU/HDD won't touch each other when I slide out the HDDs)
- have USB3.1 headers with jack
- at least 2 x 2.5" HDD cage and 2 x 3.5" HDD cage
- easy-to-maintain air filters
- <$150 if possible

For PSU:
- the most RELIABLE brand
- 600-650w range
- Bronze rating is fine
- Modular a plus

Is PCT still the place to go for buying case and PSU?
I'm going to close my eye on the <$150 part. :p

http://www.lian-li.com/en/dt_portfolio/pc-v3000/

My V2000 of 10 years old still looks as good as new. :)

The above family of cases are large enough to stuff in an EATX casing and still be a joy to maintain..

If not,
http://www.lian-li.com/en/dt_portfolio/dk-05/
 

turboo

Senior Member
Joined
Jun 30, 2011
Messages
993
Reaction score
9
thanks everyone! I have bought the Fractal R5 with M12-ii.

By the way, is it normal for front panel USB3.0 not to be able to run hard drives properly? I connected my 3TB external (2.5") with a Y-cable (for max power) and the LED light came on, but it wouldn't detect at all.

When I was using my previous case with a Unitek front panel, it connected, albeit at lower transfer speeds (40mb/s compared to back ports, it can hit 120mb/s)
 

turboo

Senior Member
Joined
Jun 30, 2011
Messages
993
Reaction score
9

DJSnip3r

Member
Joined
Aug 24, 2015
Messages
316
Reaction score
0
thanks everyone! I have bought the Fractal R5 with M12-ii.

By the way, is it normal for front panel USB3.0 not to be able to run hard drives properly? I connected my 3TB external (2.5") with a Y-cable (for max power) and the LED light came on, but it wouldn't detect at all.

When I was using my previous case with a Unitek front panel, it connected, albeit at lower transfer speeds (40mb/s compared to back ports, it can hit 120mb/s)

Should check if the internal cable is properly plugged in or try using only one end of the Y cable. Try with flash drive and see if it can detect. The only thing usb cannot run is 3.5" hdd as they usually need 12V instead of just 5V.
 

shadow84

High Supremacy Member
Joined
Apr 15, 2009
Messages
34,286
Reaction score
420
Please check if u had update your usb3.0 drivers for mobo. Go to product website to download latest.
 

turboo

Senior Member
Joined
Jun 30, 2011
Messages
993
Reaction score
9
Should check if the internal cable is properly plugged in or try using only one end of the Y cable. Try with flash drive and see if it can detect. The only thing usb cannot run is 3.5" hdd as they usually need 12V instead of just 5V.

is there any front panel that can tap on 12v instead of 5v? even better if it has USB-C connections. initially wanted to buy a case with 1 built in, but totally cannot find at all. eventually will need to install 3rd party panel..

flash drive can.

last time when I used the cheap unitek usb3 front panel with my z77 mobo, it can also detect and run my 2.5" RAID0 hard drive well, just at reduced speed..
 

turboo

Senior Member
Joined
Jun 30, 2011
Messages
993
Reaction score
9
Define R5 has 2 usb 2.0 and 2 usb 3.0. You confirm plug into the usb 3.0 ports?

i plugged into both. it's easy to see whether the hard drive is detected as 2.0 or 3.0 judging from the speed (2.0 will never exceed 30mb/s)
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top