Suggestions for a multimeter?

Shahmatt

Master Member
Joined
Oct 2, 2006
Messages
2,532
Reaction score
48
Assembling my own PSU and need to measure the output voltage. I need a multimeter for this, but have no experience buying/using these.

I see there are models from Uni-T and Aneng. Any of them good? I don't want to spend too much, but a quality unit which can measure the DC voltage accurately is preferred.

I see there is also the cable clamp style multimeter. Any disadvantages to these?
 

nothinghere

Member
Joined
Aug 9, 2022
Messages
392
Reaction score
246
I use the UNI-T UT33A+, its pretty good and accurate for a cheap multimeter, also read that it passed some stress tests on another forum.

Cable clamp is for measuring current. There aren't any inherent "disadvantages", any advantages and disadvantages depends on the implementation internally.
 

yukita

Supremacy Member
Joined
Jan 1, 2000
Messages
8,499
Reaction score
218
Assembling my own PSU and need to measure the output voltage. I need a multimeter for this, but have no experience buying/using these.

I see there are models from Uni-T and Aneng. Any of them good? I don't want to spend too much, but a quality unit which can measure the DC voltage accurately is preferred.

I see there is also the cable clamp style multimeter. Any disadvantages to these?
i gout the cheapo Aneng battery tester. rusted after a couple month. i think can avoid.
Sanwa is a good brand. but then, how much u willing to spend on multimeter?

I personally bought Sanwa CD800A3. if you want cheaper i think Sanwa PM3 is good enough.
 
Last edited:

Shahmatt

Master Member
Joined
Oct 2, 2006
Messages
2,532
Reaction score
48
i gout the cheapo Aneng battery tester. rusted after a couple month. i think can avoid.
Sanwa is a good brand. but then, how much u willing to spend on multimeter?

I personally bought Sanwa CD800A3. if you want cheaper i think Sanwa PM3 is good enough.
Thanks for the suggestion. The price of the PM3 is not bad.
 

Shahmatt

Master Member
Joined
Oct 2, 2006
Messages
2,532
Reaction score
48
I use the UNI-T UT33A+, its pretty good and accurate for a cheap multimeter, also read that it passed some stress tests on another forum.

Cable clamp is for measuring current. There aren't any inherent "disadvantages", any advantages and disadvantages depends on the implementation internally.
There are some YT videos suggesting that cable clamp is a more comprehensive instrument, for only slightly more money.
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top