alanchia67
Arch-Supremacy Member
- Joined
- May 28, 2005
- Messages
- 14,480
- Reaction score
- 458
This thread helps you learn how to mount the TV and discuss where to get the brackets and what comes with your TV.
What is a good height?
A rule of thumb is that the centre of the screen should be slightly lower than your line of sight.
Eg for a Pioneer plasma that works out to be about 90 cm above the floor.
Not every company lets you have the stand as well as the bracket, so it is best to ask.
Make sure your wall/wall feature is strong and connect all the cables first as it may be hard to reach. There must be enough clearance for connections and heat transmission.
http://www.soundandvisionmag.com/tutorial/1406/step-by-step-how-to-mount-a-flat-panel-tv.html
Step By Step: How to Mount a Flat-Panel TV
by John Sciacca
May 2006
Is getting a flat-panel set out of the box and onto the wall something you can do yourself, or do you need to hire a pro? Assuming you don't want to run any wires inside the wall, mounting a flat-panel is probably a "6" on the difficulty scale. So if you think you're up to the challenge, read on!
STEP 1: CHOOSE THE RIGHT MOUNT
There are essentially three types of wall mounts: flat, tilting, and articulating. Flat mounts are the most popular and least expensive. They hug the set tightest to the wall, creating a sleek, modern, my-TV-is-really-a-work-of-art look. Tilting mounts let you angle the TV downward, usually from 15° to 20°, but they hold the screen several inches farther from the wall. They're great if you have to place your set higher than a comfortable viewing position, such as over a fireplace. Articulating mounts offer the most versatility. Not only can they be pulled away from the wall and tilted up and down, but they can be rotated up to 180° for viewing from just about any position.
STEP 2: GATHER YOUR TOOLS
You'll need a tape measure, a level, a pencil, a finish nail and hammer, a socket-wrench set, a screw gun with a Phillips head, and a stud finder. If your TV is bigger than 32 inches, grab a buddy to help out. Large panels are heavy, and dropping one would really suck.
STEP 3: GATHER THE PARTS
You'll want a rock-steady way to secure your TV to the wall. With wood studs, that means using lag bolts. Most installers recommend 5/16- inch lags, which some mounts include and some don't. If you're mounting on concrete or brick, you'll want the appropriate anchors. If your walls are framed with metal studs, you'll need toggle bolts. (Using toggles in metal studs is tricky, so unless you have some experience, consider having a pro do the job.)
STEP 4: ATTACH THE MOUNT TO THE PANEL
Most flat-panel mounts have two main pieces: the part that's fixed to the wall and the part you attach to the TV. This second part is usually called something like the bracket interface or the mounting plate. Find and mark the vertical centerline of the TV and attach the bracket to the panel. This is easier to do if you lay the panel face-down — just make sure it's on a flat surface on something soft. Some mounts also have a part called a hook bracket that attaches to the interface bracket to marry the TV to the wall mount.
STEP 5: FIND THE STUDS
The cardinal rule when hanging something is: Make sure it stays put! So if you're installing anything heavier than a 20-inch LCD, anchor the mount in something solid — which usually means screwing into studs. [Fig. A] Using a finder is the easiest way to locate studs, but electrical outlets are also reliable since they're usually mounted to a stud. Also, studs are generally placed 16 inches on center, so once you've located one, you'll usually find the next one that far away. Tapping the finish nail into the wall is a great way to make sure you've found a stud. [Fig. B] Determine how high you want the TV — placing the vertical center of the screen at about 5 feet is a good start — and then use a pencil to mark on the wall the location of the studs and the desired screen center.
STEP 6: ATTACH THE WALL PLATE
Center the wall plate at the location you marked for the screen center. (Most plates have a small hole or slot so you can see your mark on the wall.) Use a nail to lightly hold the plate on the wall while you level it. Once it's level, drill some pilot holes for your lag bolts (15/64-inch holes for 5/16-inch lags), then screw them in. Doublecheck to make sure you're still level. Before installing the TV, pull firmly on the plate to ensure it's totally secure.
STEP 7: ATTACH THE TV
You're almost done! Lift the TV and attach the top hooks to the mounting plate on the wall — the bottom hooks should latch into place. And that's it! Connect your cables, open a cold beverage, and marvel at your handiwork.
Mod Edit - 18052009
Additional info:
How to Mount a Plasma TV on a Wall[Edit]
Most people just put their plasma TV on a stand on a table or other furniture. But what fun is that? One of the cool things about having a TV that's only 4 inches deep is the ability to mount it right on the wall!
Steps
1. Purchase a wall mount from a reputable plasma TV dealer, and ensure that it fits your TV.
2. Locate the wall studs in the wall you wish to hang the TV on. It is critical that the screws holding the TV to the wall are screwed into the solid wood of a stud, not just into the wallboard. The best way to find a stud is with a stud finder, which is available at any hardware store for less than $20.
3. When you find a stud, mark it in pencil on the wall. Measure the vertical distance between the screw holes on the mount. After deciding how high to mount the TV, mark in pencil where you will place each screw.
4. Double check that it will be level by measuring the distance from the floor up to each screw hole you have marked. It is crucial that you mount it level. It will be hard to fix after the fact if you do it poorly, so please measure twice.
5. Use big screws. Try #14 x 1.5 inch screws. For #14 screws, drill a pilot hole 13/64" wide first.
6. Attach the mount with the screws. Double check to ensure that it is level.
7. Drill or cut a hole behind the TV to run the wires into the wall, as wall mounted TVs look best if the wiring is completely hidden. Make another hole where you want them to come out. Once your holes are made, fish the cables through the wall.
8. Hang the TV on the mount. Usually, this involves attaching rubber/plastic mounts to the back of the TV, placing them through holes in the mount, and letting it settle into place.
9. Double check the stability of the TV, and ensure that it is firmly in place.
10. Connect your wiring and enjoy your TV.
Tips
1. Don't mount it too high. It's tempting to mount it at picture height, but most people would find it more relaxing to watch if the center was around 40-45 inches off the floor.
2. In new houses, studs are generally placed 16 inches apart. So if you find one, you can look for one that far away.
3. Often, power outlets are placed adjacent to a stud, so look for a stud there.
4. If you're running cables in the wall, buy quality cables that will prevent interference from power wires and other wiring in the walls. Once you get this mounted, you don't want to find out that you have a problem.
5. "Future Proof" your installation by including a DVI/HDMI cable (or at least component cables) through the wall, even if you are not using them today. If you just run S-Video or Composite cables, there is a big chance you'll want to upgrade later. For the cost of an extra $20 cable, just put it in the wall while you have it open.
Warnings
1. After hanging the mount (before you place the TV on it), find a way to add some weight to the mount to make sure it is absolutely firmly in place. Most flatscreen TVs weight around 50-150 lbs.
2. The biggest concern mounting on the wall is wiring in the wall. It's hard to be sure, but be careful
Useful:
http://www.soundandvision.com/content/4-things-keep-mind-when-wall-mounting-tv#JPux2kxcSO1OY3IR.97
4 Things to Keep in Mind When Wall Mounting a TV
What is a good height?
A rule of thumb is that the centre of the screen should be slightly lower than your line of sight.
Eg for a Pioneer plasma that works out to be about 90 cm above the floor.
Not every company lets you have the stand as well as the bracket, so it is best to ask.
Make sure your wall/wall feature is strong and connect all the cables first as it may be hard to reach. There must be enough clearance for connections and heat transmission.
http://www.soundandvisionmag.com/tutorial/1406/step-by-step-how-to-mount-a-flat-panel-tv.html
Step By Step: How to Mount a Flat-Panel TV
by John Sciacca
May 2006
Is getting a flat-panel set out of the box and onto the wall something you can do yourself, or do you need to hire a pro? Assuming you don't want to run any wires inside the wall, mounting a flat-panel is probably a "6" on the difficulty scale. So if you think you're up to the challenge, read on!
STEP 1: CHOOSE THE RIGHT MOUNT
There are essentially three types of wall mounts: flat, tilting, and articulating. Flat mounts are the most popular and least expensive. They hug the set tightest to the wall, creating a sleek, modern, my-TV-is-really-a-work-of-art look. Tilting mounts let you angle the TV downward, usually from 15° to 20°, but they hold the screen several inches farther from the wall. They're great if you have to place your set higher than a comfortable viewing position, such as over a fireplace. Articulating mounts offer the most versatility. Not only can they be pulled away from the wall and tilted up and down, but they can be rotated up to 180° for viewing from just about any position.
STEP 2: GATHER YOUR TOOLS
You'll need a tape measure, a level, a pencil, a finish nail and hammer, a socket-wrench set, a screw gun with a Phillips head, and a stud finder. If your TV is bigger than 32 inches, grab a buddy to help out. Large panels are heavy, and dropping one would really suck.
STEP 3: GATHER THE PARTS
You'll want a rock-steady way to secure your TV to the wall. With wood studs, that means using lag bolts. Most installers recommend 5/16- inch lags, which some mounts include and some don't. If you're mounting on concrete or brick, you'll want the appropriate anchors. If your walls are framed with metal studs, you'll need toggle bolts. (Using toggles in metal studs is tricky, so unless you have some experience, consider having a pro do the job.)
STEP 4: ATTACH THE MOUNT TO THE PANEL
Most flat-panel mounts have two main pieces: the part that's fixed to the wall and the part you attach to the TV. This second part is usually called something like the bracket interface or the mounting plate. Find and mark the vertical centerline of the TV and attach the bracket to the panel. This is easier to do if you lay the panel face-down — just make sure it's on a flat surface on something soft. Some mounts also have a part called a hook bracket that attaches to the interface bracket to marry the TV to the wall mount.
STEP 5: FIND THE STUDS
The cardinal rule when hanging something is: Make sure it stays put! So if you're installing anything heavier than a 20-inch LCD, anchor the mount in something solid — which usually means screwing into studs. [Fig. A] Using a finder is the easiest way to locate studs, but electrical outlets are also reliable since they're usually mounted to a stud. Also, studs are generally placed 16 inches on center, so once you've located one, you'll usually find the next one that far away. Tapping the finish nail into the wall is a great way to make sure you've found a stud. [Fig. B] Determine how high you want the TV — placing the vertical center of the screen at about 5 feet is a good start — and then use a pencil to mark on the wall the location of the studs and the desired screen center.
STEP 6: ATTACH THE WALL PLATE
Center the wall plate at the location you marked for the screen center. (Most plates have a small hole or slot so you can see your mark on the wall.) Use a nail to lightly hold the plate on the wall while you level it. Once it's level, drill some pilot holes for your lag bolts (15/64-inch holes for 5/16-inch lags), then screw them in. Doublecheck to make sure you're still level. Before installing the TV, pull firmly on the plate to ensure it's totally secure.
STEP 7: ATTACH THE TV
You're almost done! Lift the TV and attach the top hooks to the mounting plate on the wall — the bottom hooks should latch into place. And that's it! Connect your cables, open a cold beverage, and marvel at your handiwork.
Mod Edit - 18052009
Additional info:
How to Mount a Plasma TV on a Wall[Edit]
Most people just put their plasma TV on a stand on a table or other furniture. But what fun is that? One of the cool things about having a TV that's only 4 inches deep is the ability to mount it right on the wall!
Steps
1. Purchase a wall mount from a reputable plasma TV dealer, and ensure that it fits your TV.
2. Locate the wall studs in the wall you wish to hang the TV on. It is critical that the screws holding the TV to the wall are screwed into the solid wood of a stud, not just into the wallboard. The best way to find a stud is with a stud finder, which is available at any hardware store for less than $20.
3. When you find a stud, mark it in pencil on the wall. Measure the vertical distance between the screw holes on the mount. After deciding how high to mount the TV, mark in pencil where you will place each screw.
4. Double check that it will be level by measuring the distance from the floor up to each screw hole you have marked. It is crucial that you mount it level. It will be hard to fix after the fact if you do it poorly, so please measure twice.
5. Use big screws. Try #14 x 1.5 inch screws. For #14 screws, drill a pilot hole 13/64" wide first.
6. Attach the mount with the screws. Double check to ensure that it is level.
7. Drill or cut a hole behind the TV to run the wires into the wall, as wall mounted TVs look best if the wiring is completely hidden. Make another hole where you want them to come out. Once your holes are made, fish the cables through the wall.
8. Hang the TV on the mount. Usually, this involves attaching rubber/plastic mounts to the back of the TV, placing them through holes in the mount, and letting it settle into place.
9. Double check the stability of the TV, and ensure that it is firmly in place.
10. Connect your wiring and enjoy your TV.
Tips
1. Don't mount it too high. It's tempting to mount it at picture height, but most people would find it more relaxing to watch if the center was around 40-45 inches off the floor.
2. In new houses, studs are generally placed 16 inches apart. So if you find one, you can look for one that far away.
3. Often, power outlets are placed adjacent to a stud, so look for a stud there.
4. If you're running cables in the wall, buy quality cables that will prevent interference from power wires and other wiring in the walls. Once you get this mounted, you don't want to find out that you have a problem.
5. "Future Proof" your installation by including a DVI/HDMI cable (or at least component cables) through the wall, even if you are not using them today. If you just run S-Video or Composite cables, there is a big chance you'll want to upgrade later. For the cost of an extra $20 cable, just put it in the wall while you have it open.
Warnings
1. After hanging the mount (before you place the TV on it), find a way to add some weight to the mount to make sure it is absolutely firmly in place. Most flatscreen TVs weight around 50-150 lbs.
2. The biggest concern mounting on the wall is wiring in the wall. It's hard to be sure, but be careful
Useful:
http://www.soundandvision.com/content/4-things-keep-mind-when-wall-mounting-tv#JPux2kxcSO1OY3IR.97
4 Things to Keep in Mind When Wall Mounting a TV
Last edited by a moderator:
