4 pin Molex adapter

[Jonstudy]

Any idea where to get molex adapter for 4 pin case fan? Tried everywhere else but couldnt find it. Does the upcoming comex show have it? Currently have 2 CM 4pin case fan but Mobo only have 1 sysfan head. Trying to connect to psu.

 

[FlipGor]

Any idea where to get molex adapter for 4 pin case fan? Tried everywhere else but couldnt find it. Does the upcoming comex show have it? Currently have 2 CM 4pin case fan but Mobo only have 1 sysfan head. Trying to connect to psu.

Hi there, dun think there is a molex adapter for 4 pin. There is a adapter for 3pin. I presume the 4pin fans u are referring to are PWM 4pin fans? If that is so, u can either get a split cable or get a 4pin fan controller.

 

[Koenig168]

Any idea where to get molex adapter for 4 pin case fan? Tried everywhere else but couldnt find it. Does the upcoming comex show have it? Currently have 2 CM 4pin case fan but Mobo only have 1 sysfan head. Trying to connect to psu.

You can use the molex to 3-pin adapter. It'll work for 4-pin fan.

 

[Koenig168]

Found it for you.

http://www.ebay.com/itm/1Pcs-4Pin-To-Molex-4Pin-PC-Computer-Fan-Extension-Adapter-Cable-Wire-20cm-8-/221309111737?hash=item33870d0db9:g:0KgAAOxyffZSW6sw

 

[commach]

Found it for you.

http://www.ebay.com/itm/1Pcs-4Pin-To-Molex-4Pin-PC-Computer-Fan-Extension-Adapter-Cable-Wire-20cm-8-/221309111737?hash=item33870d0db9:g:0KgAAOxyffZSW6sw

Can't use this, this is for 4 pins molex to 4 pins floppy power cable. Use this will result in 12v feed to the PWM pin or GND pin depends on which orientation you connect it.

 

[Jonstudy]

So no choice but to use Splitter? Can one sysfan head support 3 fan?

 

[ZrE0_Cha0s]

So no choice but to use Splitter? Can one sysfan head support 3 fan?

u mean u want to use your 4 pins header to split between 3 fans??? if there is the case, are u running a AIO?

 

[commach]

So no choice but to use Splitter? Can one sysfan head support 3 fan?

Not advisable due to high current draw from the 3 from from a single fan connector.

Buy 4 pins molex to 3 pins male connector cable:

 

[cloud77]

Did u try sim lim tower ?

 

[Jonstudy]

Solved!
I bought a Molex to 2pin Adapter. Cut away the right side so that my 4pin connector can fit in. It works! Just a question, my gpu is sucking air in, should my case fan follow the same orientation or should it blow air out?

 

[ZrE0_Cha0s]

but gpu fans suck in fans is to cool those heat fins and pipe, thus making your gpu temp lower, if blows on reverse direction, it could results in other adverse effects which im not aware or sure about it.

 

[hawthorne]

Gpu fan supposed to blow air onto the heatsink

 

[shadow84]

Ur case fan should be pushing air towards gpu fan intake. Dun make it fight for air with gpu otherwise your gpu will overheat.

 

[Jonstudy]

Roger that! Thanks for ur advice!