Advise for upgrading

Coool11

Member
Joined
Jan 20, 2015
Messages
274
Reaction score
4
Recently my GPU (MSI 1080TI gaming X) went kaput. Monitor will blank when game is loaded up or midway through gaming, background sound still can be heard though. No issue when doing other stuffs like surfing etc. Dont intend to change the whole rig so probably will change my just my GPU to 3070Ti and my CPU to 2nd hand 8700K, enough to last a few more years?
Current rig : 8500K Z370mb + 16G RAM + 750w PSU on 34 ultrawide 1440p monitor
 

royfrosty

High Supremacy Member
Joined
Jul 23, 2009
Messages
27,727
Reaction score
1,553
Recently my GPU (MSI 1080TI gaming X) went kaput. Monitor will blank when game is loaded up or midway through gaming, background sound still can be heard though. No issue when doing other stuffs like surfing etc. Dont intend to change the whole rig so probably will change my just my GPU to 3070Ti and my CPU to 2nd hand 8700K, enough to last a few more years?
Current rig : 8500K Z370mb + 16G RAM + 750w PSU on 34 ultrawide 1440p monitor
Check the temperature first. Likely if you still can hear sound. Sounds like the thermal paste could have dried up and overheating occurs.

Cause the fact that normal task is fine.
 

Coool11

Member
Joined
Jan 20, 2015
Messages
274
Reaction score
4
Check the temperature first. Likely if you still can hear sound. Sounds like the thermal paste could have dried up and overheating occurs.

Cause the fact that normal task is fine.
The temp did actually increased recently. Was gaming ow at 72/73 but recent months has been at 80/81. Let me repaste thermal and see if it fixes the problem. Thank you for the advise.
 

royfrosty

High Supremacy Member
Joined
Jul 23, 2009
Messages
27,727
Reaction score
1,553
The temp did actually increased recently. Was gaming ow at 72/73 but recent months has been at 80/81. Let me repaste thermal and see if it fixes the problem. Thank you for the advise.
Oh then definitely that is something you should take a look at. Best just repaste it first..
 

Rogue

Senior Member
Joined
Jan 1, 2000
Messages
5,369
Reaction score
116
Not just thermal paste , you need to get some replacement thermal pads(0.5mm and 1mm versions depending on the layout) for the VRM as some will tear once you remove the heatsink... Of course isopropyl alcohol to remove the gunk.
 

Gaminator

Supremacy Member
Joined
Jul 21, 2004
Messages
8,627
Reaction score
691
Excuse me, I'm not familiar with Intel CPUs, more of an AMD guy, but is there a 8500K? I'd thought there was only the 8500 (non-K), and 8600K.
 

86technie

High Supremacy Member
Joined
Jun 8, 2006
Messages
40,351
Reaction score
5,939

You may need to flash the BIOS before upgrading the graphic card.
Which motherboard is that? FYI for that generation of CPUs, motherboard
does support resizable bar with a BIOS update.

To isolate and confirm if it is a graphic card issue, have you tried uninstall the graphic card
than install latest graphic card driver?
Usually faulty graphic card during driver installation will either black screen or hang.

Do disconnect the internet before updating/uninstall the graphic card driver as Windows
will install the graphic card driver thus may conflict with the installation process.
 

Coool11

Member
Joined
Jan 20, 2015
Messages
274
Reaction score
4
Excuse me, I'm not familiar with Intel CPUs, more of an AMD guy, but is there a 8500K? I'd thought there was only the 8500 (non-K), and 8600K.
Erm you are right. Mine is 8600k. Thank you for pointing out the mistake.
 

Coool11

Member
Joined
Jan 20, 2015
Messages
274
Reaction score
4
You may need to flash the BIOS before upgrading the graphic card.
Which motherboard is that? FYI for that generation of CPUs, motherboard
does support resizable bar with a BIOS update.

To isolate and confirm if it is a graphic card issue, have you tried uninstall the graphic card
than install latest graphic card driver?
Usually faulty graphic card during driver installation will either black screen or hang.

Do disconnect the internet before updating/uninstall the graphic card driver as Windows
will install the graphic card driver thus may conflict with the installation process.
MSI z370 carbon
You may need to flash the BIOS before upgrading the graphic card.
Which motherboard is that? FYI for that generation of CPUs, motherboard
does support resizable bar with a BIOS update.

To isolate and confirm if it is a graphic card issue, have you tried uninstall the graphic card
than install latest graphic card driver?
Usually faulty graphic card during driver installation will either black screen or hang.

Do disconnect the internet before updating/uninstall the graphic card driver as Windows
will install the graphic card driver thus may conflict with the installation process.
MB is MSI Z370 gaming pro carbon. Did try to update to new driver (clean installation), problem still persist. 🥲
 

86technie

High Supremacy Member
Joined
Jun 8, 2006
Messages
40,351
Reaction score
5,939

Coool11

Member
Joined
Jan 20, 2015
Messages
274
Reaction score
4
uplorry liao time to buy new one?
:censored:
Yes. That would likely be the case. At least i can tell my other half that i have tried to fix the card, now i can purchase new card without any nagging.:p 3070ti or 4070ti? 4070ti is 1 x 16pin right? They will come with a adapter right?
 

Unclemun

Supremacy Member
Joined
Jun 21, 2003
Messages
8,735
Reaction score
749
Can you play 2D games? Or other games? Try to test the graphic card using the graphic card utilities.
 

Coool11

Member
Joined
Jan 20, 2015
Messages
274
Reaction score
4
Haiz, dont intend to fix liao. Thinking of changing to 4070Ti. Saw that it require a 16pin? Will there be a adapter for 2 x 8 into 16 pin?
 

Rogue

Senior Member
Joined
Jan 1, 2000
Messages
5,369
Reaction score
116
DDU remove all drivers and clean install drivers. Other than that, check your display settings, monitor and profile in case it's setting itself to out of freq range. PSU might also be a problem, old or faulty, if suddenly not able to provide enough power to the gpu (Which you also need to keep in mind when upgrading and still fails to run...).
 

86technie

High Supremacy Member
Joined
Jun 8, 2006
Messages
40,351
Reaction score
5,939
Haiz, dont intend to fix liao. Thinking of changing to 4070Ti. Saw that it require a 16pin? Will there be a adapter for 2 x 8 into 16 pin?

There is but take note not sure what power supply you are using.
It is recommend to change to at least 850 watt for RTX 4000 series.
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top