Air conditioning - Any recommendations please??

Status
Not open for further replies.

Ronnxer

Junior Member
Joined
May 19, 2009
Messages
24
Reaction score
0
Hi, any recommendation for a reliable system 3 air con ? Please kindly advise. Thanks.
 

kimsim

Suspended
Joined
Nov 1, 2008
Messages
1,689
Reaction score
1
Thanks, I recently went down to GC and realized they only selling inverters set air con. One of the brand Toshiba was highlighted as one of the lowers in power consumption. Thoughts?

Toshiba is good also, just the outdoor unit was made in Japan, once got any issue for the parts repair cost much higher than Mit Starmex.

Toshiba, Pana, hitachi, sharp, ME or MHI, Daikin if getting inverter for the power consumption was not too much different.

Anyway went to inverter unit garranty pay cheaper utility bills.

wow my this month utility just less than $100 <

Your online bill for Jan 2015 is now available at http://services.spservices.sg/. You may also view
your utility service usage compared to the average usage of all neighbours and the national average
of HDB 3-Room Flats.

Bill Summary Jan 2015
Your current account balance of $98.65 will be due on 12.02.2015

Usage Comparison
Your Usage All Neighbours National Average
Usage* Usage**
Electricity Usage 246 kWh 261 kWh 299 kWh
Water Usage 13.9 Cu M 14.0 Cu M 14.6 Cu M
* All Neighbours Usage refers to the average utility service usage of HDB 3-Room Flats within your block.
** National Average Usage refers to the average utility service usage of HDB 3-Room Flats in Singapore.

I got system 3 (2x 1hp) inverter switch on at least more than 8hrs + 1.5hp for living room every night turn on from 7pm to 11pm (except weekend sat & sun in JB)

Got Electrolux heat pump 9kg usage weekday n daily for 30mins per cycle dry, also the home appliances, such as washer samsung WW8000 and Pana NR-BY602XS and Storage tank Ariston heater 25L for each time switch on when taken bath, Pana Thermo pot for 24hours.
http://www.panasonic.com/my/consumer/kitch...h30_40p.htmlnot that bad..

But make sure your house has to install all LEDs lights, that's really much saving. :shock:

:thumbs:
 
Last edited:

hippoheyhey

Supremacy Member
Joined
May 13, 2009
Messages
5,019
Reaction score
201
seeking expert opinon, one of my fan coil unit inside all mouldy, how to remove? if use air-con servcing technican, they know how?
 

xiaohanhan

Member
Joined
Nov 30, 2006
Messages
271
Reaction score
2
Bought from all-best imm, 3rd hse buying from them.

Just bought ME star mex sys 4 9/9/9/26k blower
compresser is mxy4a-28

New house bto installation -$3700
upgrade to 1/2"armaflex insulation -$150

Hi i just brought from them as well. Any feed back or things to take note?
 

kimsim

Suspended
Joined
Nov 1, 2008
Messages
1,689
Reaction score
1
Anyone here installed Mit Starmex FCU model FD25/35VA for deluxe model?

How good Ins't?
Got auto swing left & right?
 

PPkiller

Senior Member
Joined
Oct 28, 2000
Messages
2,139
Reaction score
1
Anyone has the link to see the newer efficiency rating for the different compressor models?
 

habsters

Senior Member
Joined
May 2, 2010
Messages
644
Reaction score
1
Anyone using York aircons here? Would like to go with one for new bto cuz of the affordable price. However, alot people using mitsubishi nowadays, is it because it saves more power in the long run? First time buying aircon here. :D

In terms of cleaning which one easier to dismantle? Thanks!
 

kimsim

Suspended
Joined
Nov 1, 2008
Messages
1,689
Reaction score
1
Anyone using York aircons here? Would like to go with one for new bto cuz of the affordable price. However, alot people using mitsubishi nowadays, is it because it saves more power in the long run? First time buying aircon here. :D

In terms of cleaning which one easier to dismantle? Thanks!

York in m'sia already sold to daikin and all york products was daikin fews months ago...

Seriously mitsubishi electric really gooding than others.
I would prefer you go with Starmex is never wrong one
 

ZenArc

Senior Member
Joined
Sep 4, 2002
Messages
801
Reaction score
0
Hi i got the following quote . is it ok?

Mitsubishi Electric Starmex
Compressor: 28000BTU
Fan Coil Unit: 3X10000BTU
Price: $2800 (U.P. $2979++)

Installation Package Includes:

1. Free Site Survey
2. Free Installation
3. No Transport Charge
4. Free One-Time Chemical Servicing + Free Gas Top-up (To be used within 3 months from installation date)
5. Lifetime Discounted Rate for Chemical Servicing
6. Free Upgrade of Installation Materials
• PVC Drainage Pipes: 20mm
• Insulations: 3/8” Armaflex Insulation
• Wire Cables: Sigma 4C40 or 3C70
• Copper Pipes: G22 SWG Copper Coil
7. 1 Year Installation Warranty
8. 5 Years Agent Warranty for Compressor Unit
9. 1 Year Agent Warranty for Fan Coil Unit

is the 20mm Drainage Pipes too big? i saw pple using 13mm or 16mm mostly.
for the wire cable is sigma ok or should i request for keystone?
is g22 with 3/8" armaflex ok or i should request for 1/2"?

house is a 4rm bto and the aircon piping will be boxed up along the corridor.

pls advice. thanks in advance. =)
 
Last edited:
Status
Not open for further replies.
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ. Forum members and moderators are responsible for their own posts.

Please refer to our Community Guidelines and Standards, Terms of Service and Member T&Cs for more information.
Top