Anyone experience in spraying their PC case ?

koroshiya8

High Supremacy Member
Joined
Feb 12, 2005
Messages
37,713
Reaction score
542
As above... planning to spray some part of my case to white color :s13:

Use this can mah ?

NIPPON_PAINT_0003_17465.jpg
 

sglords

Supremacy Member
Joined
Jan 17, 2011
Messages
6,568
Reaction score
38
U will regret lol
Tis type of spray damn lao ya
Spray on my radiator to test like kns hahaha

If really wan quality go for powder coat or at least automotive spray grade.
Or
Can try 3m carbon fiber

Same thing don't expect cheap thing to be good.
Good thing to be cheap
 
Last edited:

koroshiya8

High Supremacy Member
Joined
Feb 12, 2005
Messages
37,713
Reaction score
542
U will regret lol
Tis type of spray damn lao ya
Spray on my radiator to test like kns hahaha

If really wan quality go for powder coat or at least automotive spray grade.
Or
Can try 3m carbon fiber

Same thing don't expect cheap thing to be good.
Good thing to be cheap

Thanks.... first time i have the thought and the first thing that comes to my mind are these mainstream spray available.. if got better ones definitely will consider seriously first hehe.. simi ish powder coat... i will go google out.
 

sglords

Supremacy Member
Joined
Jan 17, 2011
Messages
6,568
Reaction score
38
Actually saw convergent got one guy wan yellow 780t
But couldn't get locally so he spray e case to yellow using e Nippon nylon
Look nice on photo but i tink e paint won't last

Tis type of spray paint is jus for thin layer cover up
If spray too many layer tink anything compress e paint will get marking and easily peel off.

Plastic maybe can. Metal way no no
 

royfrosty

High Supremacy Member
Joined
Jul 23, 2009
Messages
27,735
Reaction score
1,558
TBH I was the one whom did tried to spray my 900D. It is a total disaster, and it failed terribly.

In the end I went for powder coat instead. Went on to sand blast the terribly failed spray coating.

Then finally powder coat it.

Powder coating requires the pc to be full metal. Not a single plastic should be inside. Cause it will go through extreme high heat inside the oven. Inside will melt any kind of plastic found.

So disassembling the entire pc is necessary.
 

koroshiya8

High Supremacy Member
Joined
Feb 12, 2005
Messages
37,713
Reaction score
542
thanks for sharing.. what if i just want to spray part of the side panel which is basically plastic ? if really so ley chey i will just drop the idea until the next case i buy haha.
 

enenyi

Supremacy Member
Joined
Nov 22, 2011
Messages
5,927
Reaction score
5
thanks for sharing.. what if i just want to spray part of the side panel which is basically plastic ? if really so ley chey i will just drop the idea until the next case i buy haha.

Corsair 760t side panel, I assume? Plasti dip?
 

sglords

Supremacy Member
Joined
Jan 17, 2011
Messages
6,568
Reaction score
38
Can try but must be few layer thin coat
Also got chance that u will screwed ur case if 2-3 layers can't cover it to matt white
 

royfrosty

High Supremacy Member
Joined
Jul 23, 2009
Messages
27,735
Reaction score
1,558
Yes plasti dip it instead.

But spray nearer and also be adequately sprayed.
 

kandinsky

Master Member
Joined
Jan 7, 2015
Messages
4,693
Reaction score
10
thanks for sharing.. what if i just want to spray part of the side panel which is basically plastic ? if really so ley chey i will just drop the idea until the next case i buy haha.

Use a spray paint designed for plastic. The normal type may have solvents that are unsuitable for certain plastics.

The other thing about spray painting is proper surface preparation. Lightly sand surface > use primer > final paint - thin layers are better than thick. Without proper prep, the new paint won't adhere to the old surface properly and may easily scratch off.

http://www.krylon.com/products/fusion-for-plastic/
http://www.krylon.com/products/colormaster-plastic-primer/

http://www.krylon.com/how-to/how-to-videos/how-to-spray-paint-plastic-video/
 

royfrosty

High Supremacy Member
Joined
Jul 23, 2009
Messages
27,735
Reaction score
1,558
Plasti dip google it and you can see their website and fb page for sg.

They are located at kallang way. Very near towards aljunied rd.
 

-nzy90

Supremacy Member
Joined
Apr 3, 2007
Messages
6,606
Reaction score
4
Spray many thin coats. Don't spray too thick. Thin meaning the first layer probably can't see much of the color you spraying. Slowly build up. Don't spray too near or too far also. Too near the layer too thick. Too far the paint dry before it hits the surface and makes it look rough. About 30cm away should be just nice.

Sent from Samsung SM-N910G using GAGT
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top