Ask a Bicycle Question - Part 5

Status
Not open for further replies.

Sadisticnoob

High Supremacy Member
Joined
Jun 12, 2006
Messages
39,855
Reaction score
1,834
Need some advice... cyclingexpress.com got sell 1 azzurri carbon bike with ultegra 6800 groupset for abt 2.3k, not sure whether it is worth it.

Thinking of hooting it...

A fellow edmwer has that I think it is okay he's usinh it with di2
 

patcheon

Arch-Supremacy Member
Joined
Jun 21, 2004
Messages
12,339
Reaction score
5
Flip out to wash? Wash with other normal clothes with buttons?

Sent from Samsung SM-C115 using GAGT

Yup...flipped out. And washed along with all the other clothings. So far like no issues with the jerseys. I prefer my jerseys on the loose side also. :D The tight's rubber bands can become loosen after like 2-3 years of usage. Think the lycra also sort of thinned out after a few years of usage. Now sometimes use the old tights on the inside with berms/cargo shorts on the outside if going for MTB rides.
 

iamlenon

High Supremacy Member
Joined
Jul 18, 2010
Messages
38,822
Reaction score
3
I'm not really sure about that as there didn't seem to be any physical damage on the taxi. He did compensate me with some cash and apologized for what happened though.


Thanks! If I have no luck on Togoparts, I will give Cheap John's a call.


The taxi driver said he would only bear partial responsibility because apparently it was my fault for cycling across the zebra crossing in the first place (he said I should have dismounted). In my defense, I checked the road to see if it was clear of traffic before going across the zebra crossing and he was quite a distance away. Just as I was almost at the park connector end of the zebra crossing, I saw his taxi approaching and reducing speed (I assumed he was going to stop), however I do not recall seeing his taxi come to a complete stop to wait till I reached the other side and he whacked my rear wheel as he tried to drive off. The force of the impact caused my bike to skid, then the bent rims got caught in my V brakes and I went tumbling down.

I was also wearing my Nike shirt with reflective material, bike helmet with reflective stripes, had Schwalbe Kojak tyres with reflective text on the sides, both front and rear blinkers on at the time of impact so I am pretty sure I was visible.

At one point the taxi driver asked why I was on a bicycle yet riding so slow across the zebra crossing. I told him:

1) Park connector has speed limit and I cycle slower at traffic crossings for safety.
2) There was a cyclist coming towards me at the opposite direction, so I thought it was common sense to slow down to avoid a collision.

Anyway, there were two eye witnesses (the cyclist and a driving instructor) who took my side yet the taxi driver refused to take full responsibility for what happened and began to rant about "You cyclist always like this." I don't know why I didn't think about this at the time (probably too "stun like vegetable" at what just happened) but I should have asked him to take his car cam and play back the recording.

I am thankful that the outcome was not worse and that I got away with only a scratched knee and a bent rim.

Anyway that's a relief that I should be able to remount the 7 speed sprocket back onto another wheel. Thanks for your advice! I have been using the MV7 for almost two years already and it has served me well for halfway around the island rides with buddies and commute to work but I was thinking that maybe it was time for an upgrade but if it does not make sense cost-wise then maybe I will save up for a better bike in the future.


Noted! I shall check out Togo for my replacement. Thanks! Any idea what the damage is like upgrading to 10 speed? I was thinking of doing that or saving up and buying a better mini velo or folding bike some day (space constraints at home is my main concern) but I have gotten quite attached to my MV7 and the journeys we've shared. :D


Thanks! Yeah, eventually the taxi driver stopped his taxi just before the main road and came over to check on me but it was another fellow cyclist who came to my aid first. The taxi driver eventually apologized and gave me all the cash he had in his wallet, which was $160.00. I initially refused as I told him a new wheel set would probably cost way more than that and my bicycle originally cost me around $280.00. He said that's all he had and that it was also partially my fault the accident occurred. I began to recall how difficult it is to make a living as a taxi driver and that it is human to make mistakes so I accepted his cash offer as compensation and did not press him for more. Hey at least there was some compensation right? He could have just driven off like a hit and run and I would not have been able to snap a picture of his license plate in time. At least he manned up and took some responsibility even when there was no damage to his taxi.

u jin good hearted~
好人有好报
 

Tok Kong

Supremacy Member
Joined
Feb 17, 2008
Messages
8,448
Reaction score
774
I am switching fork, but not able to remove the pictured item (should be a crown race right?) to transfer onto my other fork.

Any idea to extract it or is this part easy to buy in LBS?

2rw0ohs.jpg


j0fubk.jpg
 

iamlenon

High Supremacy Member
Joined
Jul 18, 2010
Messages
38,822
Reaction score
3
How do i tell if the rim of a bicycle with 700-23c can fit "700-32c to 700-38c" tyre?

intending to get a bicycle with the option of changing to wider tyre
 

beast

Senior Member
Joined
Jan 1, 2000
Messages
1,351
Reaction score
2
As long there is rust on the chain even it is a tiny little bit, no point cleaning it and lube it coz damage has been done so no choice but to change to a brand new chain is the norm?
 
Last edited:

Jay Bee

Banned
Joined
Jan 31, 2013
Messages
43,120
Reaction score
2
As long there is rust on the chain even it is a tiny little bit, no point cleaning it and lube it coz damage has been done so no choice but to change to a brand new chain is the norm?

after i clean my rusty chain, is smoother, but will be changing it, currently cant back pedal, the rear derailleur keep jamming
 

Sadisticnoob

High Supremacy Member
Joined
Jun 12, 2006
Messages
39,855
Reaction score
1,834
As long there is rust on the chain even it is a tiny little bit, no point cleaning it and lube it coz damage has been done so no choice but to change to a brand new chain is the norm?

My rusty chain still can use la, important thing is the bearings inside the chain is good

But so far the chains on my main bikes don't rust
 

Sadisticnoob

High Supremacy Member
Joined
Jun 12, 2006
Messages
39,855
Reaction score
1,834
I am switching fork, but not able to remove the pictured item (should be a crown race right?) to transfer onto my other fork.

Any idea to extract it or is this part easy to buy in LBS?
You need a special tool to hammer it(it doesn't look like a hammer but the motion is hammering out) out cause that one is press in just go lbs. The tool is very expesnive approximately 100 sgd or so online not good for a once every few years tool

Most lbs don't store individual races so you need to buy a new headrest
 

Sadisticnoob

High Supremacy Member
Joined
Jun 12, 2006
Messages
39,855
Reaction score
1,834
How do i tell if the rim of a bicycle with 700-23c can fit "700-32c to 700-38c" tyre?

intending to get a bicycle with the option of changing to wider tyre

Don't think can most "new" road bike tires trend is movement towards 25 and 28c maybe the 28c can fit in the 32
 

likehotbutter

Supremacy Member
Joined
Oct 20, 2010
Messages
5,798
Reaction score
819
after i clean my rusty chain, is smoother, but will be changing it, currently cant back pedal, the rear derailleur keep jamming

This is not a rust issue. I think ur chain stretched out abit already. How long since your last change and you got check with a chain wear tool from time to time?
 

likehotbutter

Supremacy Member
Joined
Oct 20, 2010
Messages
5,798
Reaction score
819
Don't think can most "new" road bike tires trend is movement towards 25 and 28c maybe the 28c can fit in the 32

32,38 is bigger than 28c yea? Moving up (but not too much) shouldnt be a prob but normally moving down is? As the wire bead maybe too narrow to seat on the rim?
 
Status
Not open for further replies.
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top