Ask a Bicycle Question - Part 5

Status
Not open for further replies.

Akai Ryu

Arch-Supremacy Member
Joined
Dec 14, 2007
Messages
22,452
Reaction score
302
:s12:Got my bike bck fr some upgrading...gonna clothe it later :o

Thinking of putting a bash guard...any comment on the pros and con of having one installed? Mine's a 2X10

v5r5Ptt.jpeg


Wheres a gd place to look for padded 3/4?
 

rarenick

High Supremacy Member
Joined
Jul 12, 2008
Messages
26,319
Reaction score
3,739
I had used a pump without a gauge before...had always thought that as long as I feel it is hard enough, it is ok. Then once, about 3 hours after an overnight ride, the rear tire just exploded. The bike was parked beside a cardboard box and the explosion made the box looks as if it has been punched in. Dunno if it can cause injury had it exploded when riding and my leg is just beside the tire. Got a pump with a gauge after that incident.
That's pretty scary!
So having a gauge pump is almost compulsory, isn't it?
So I have to spend on pump on top of the tyres.
Do I also need to change my tube which is currently using high pressure presto for a knobby tyre?

And if I ride slick tyres on uneven slabs on pavement and occasionally on the grass patches beside the slabs, will it have a much higher chance of puncture as compared to knobby tyres?

Sent from me to you using GAGT
 

albertchng

Arch-Supremacy Member
Joined
Jan 1, 2000
Messages
13,386
Reaction score
18
That's pretty scary!
So having a gauge pump is almost compulsory, isn't it?
So I have to spend on pump on top of the tyres.
Do I also need to change my tube which is currently using high pressure presto for a knobby tyre?

And if I ride slick tyres on uneven slabs on pavement and occasionally on the grass patches beside the slabs, will it have a much higher chance of puncture as compared to knobby tyres?

Sent from me to you using GAGT

For mtb and folding bike, the tire pressure usually quite low depend on tire, panaracer is max 65 psi. Schwalbe marathon supreme is max at 85 psi so if you are outside using a portable pump, never pump until very hard or else it will surely explode.

For road bike using 23C/25C tires, max pressure is about 120-145psi, using portable pump hard to gauge and pump to high pressure. So most of us that have experience changing tube on the road, we prefer to carry 16g CO2 cartridge. Each cartridge can pump up the road bike tire to 110 psi; just nice.

The knobby tire in mtb has low pressure, max at 55-65 psi but most experienced offroad riders will pump up to 40-50 psi max.

The semi-slick tire on mtb and slick tire use on mtb and folding bike, max psi is usually 85 psi. Depend on the terrain riding on, on road pump to 80 psi, offroad mixed with on road or hard pack terrain 70 psi.

The 23C or 25C clincher(require inner tube) tire for road bike, max psi range from 120-145 psi, they are usually pump up to 95% of the max psi. The 700x25C tire i'm using on my road bike, i pump to 110 psi. On the road using CO2 cartridge 1 valve is enough.
 

albertchng

Arch-Supremacy Member
Joined
Jan 1, 2000
Messages
13,386
Reaction score
18
:s12:Got my bike bck fr some upgrading...gonna clothe it later :o

Thinking of putting a bash guard...any comment on the pros and con of having one installed? Mine's a 2X10

v5r5Ptt.jpeg


Wheres a gd place to look for padded 3/4?

The Montague Paratrooper is a heavy folding bike. I see you upgrade to a 2 chainrings crank. There is a reason for the 3 chainrings crank for this bike. This bike is use by soldier cycling on and offroad condition with full battle armor, weapons and pack, on tough terrain the smallest granny ring on the crank is the most needed. No way they can cycle on narrow moist single track terrain using the bigger chainrings. Unless you seldom or dont go offroad, then i can understand 2 chainrings crank.

If you see those pro FR/DH riders from overseas in magazine, you will notice their cassette is usually 7-8 speeds and a single granny chainring crank. Their playground/terrain is the main reason for this kind of setup.

You looking for bashguard, try bike shops like TiongHin @ Midview City or C2C @ AMK Ave 10.
 
Last edited:

albertchng

Arch-Supremacy Member
Joined
Jan 1, 2000
Messages
13,386
Reaction score
18
Chromoly is a steel alloy which also includes chromium and molybdenum. It has excellent strength to weight ratio and are considerably stronger and harder than standard steel.

Just look at the thickness (or diameter) of chromoly frame bicycle:

...

Now look at the frame thickness of Tern folding bicycle which is made of Al...

...

The thickness is different, but both will have the same structural strength so there's no worry about either of them being unsafe. Hence, it is not true that steel/chromoly will always be heavier than Al. A well engineered chromoly frame bicycle can shave off a lot of weight.

Chromoly frame is thinner and will flex when you pound on it. It can translate to a more comfortable ride but efficiency could be lost due to the flexing. For Al, it is generally very stiff, which makes it more efficient but is not as comfortable as chromoly.

That's why you have to ride both to test which bicycle you prefer.

Aluminum Folding bike that fold at center flexes too much when the rider is overweight.

Brompton due to it unique folding style and material, is more sturdy, maybe even doesn't flex (i'm not sure, never rode one b4), see a lot of overweight riders most of them ride Brompton.
 

erwinrommel

High Supremacy Member
Joined
Sep 30, 2007
Messages
27,904
Reaction score
3,157
Aluminum Folding bike that fold at center flexes too much when the rider is overweight.

Brompton due to it unique folding style and material, is more sturdy, maybe even doesn't flex (i'm not sure, never rode one b4), see a lot of overweight riders most of them ride Brompton.

If Al bike flexes too much, wait til you try the Dahon chromoly frame. :s22:

I tried it while climbing up-slope... the flexing is too much. But its somewhat more comfortable than the stiff Al frame that Tern uses.
 

cyberian

Senior Member
Joined
Jan 1, 2000
Messages
1,586
Reaction score
0
Hi,

I'm a newbie to this cycling thread. Too many page to cover, so need some time to catch up on the pages. Forgive me if I ever ask stupid question. I'm a casual rider and own 2 Tern B7, 3 months old. I'm still looking for 1 more foldies. ;)
 

albertchng

Arch-Supremacy Member
Joined
Jan 1, 2000
Messages
13,386
Reaction score
18
Hi,

I'm a newbie to this cycling thread. Too many page to cover, so need some time to catch up on the pages. Forgive me if I ever ask stupid question. I'm a casual rider and own 2 Tern B7, 3 months old. I'm still looking for 1 more foldies. ;)

Buy a Brompton or a Tyrell.
 

albertchng

Arch-Supremacy Member
Joined
Jan 1, 2000
Messages
13,386
Reaction score
18
If Al bike flexes too much, wait til you try the Dahon chromoly frame. :s22:

I tried it while climbing up-slope... the flexing is too much. But its somewhat more comfortable than the stiff Al frame that Tern uses.

No more Dahon or any folding bike with center fold mechanism.
 

Akai Ryu

Arch-Supremacy Member
Joined
Dec 14, 2007
Messages
22,452
Reaction score
302
The Montague Paratrooper is a heavy folding bike. I see you upgrade to a 2 chainrings crank. There is a reason for the 3 chainrings crank for this bike. This bike is use by soldier cycling on and offroad condition with full battle armor, weapons and pack, on tough terrain the smallest granny ring on the crank is the most needed. No way they can cycle on narrow moist single track terrain using the bigger chainrings. Unless you seldom or dont go offroad, then i can understand 2 chainrings crank.

If you see those pro FR/DH riders from overseas in magazine, you will notice their cassette is usually 7-8 speeds and a single granny chainring crank. Their playground/terrain is the main reason for this kind of setup.

You looking for bashguard, try bike shops like TiongHin @ Midview City or C2C @ AMK Ave 10.


Wanted 3 X 10 initially but mech recommended 2 coz the main purpose of my upgrade was to shed some weight and better shifting, the new wheelset did the trick for me. My new crank is this http://www.amazon.com/Shimano-CR4408-p-FC-M785-XT-Crankset/dp/B008Z9CUQU

im not gonna ride FBO and yes occasional weekend off road only at green corridor :o
I mainly ride for leisure but am gonna try to commit for commuting to my new workplace. Still trying to get use to 2x10...hope can still climb some slope with this setup

I read that bashguard mainly to protect drivetrain from getting bash...ok speaking the obvious...got any other purpose for installing bashguard?? I am thinking... protect calf from "tiger claw" marks and for aesthetic...but am worry that it may trap grime and make cleaning more difficult.

Thanks will go C2C to ssrr
 

KiraX_19

High Supremacy Member
Joined
Sep 27, 2006
Messages
44,257
Reaction score
118
I dont mind old bikes. I really like the D8 though. I want my OWN bicycle.

I always feel his bicycles are too big for me. Im 160cm and slightly less than 50kg.

cant believe u solo backpack russia...uzbekistan,
u cant even buy ur own bicycle!! :s13:
 

erwinrommel

High Supremacy Member
Joined
Sep 30, 2007
Messages
27,904
Reaction score
3,157
No more Dahon or any folding bike with center fold mechanism.

Brompton has a middle pivot hinge if I get you.

Tyrell and Bike Friday do not have. But Tyrell uses the locking pin at the fork...

Bike Friday is the more sturdy one for sure...
 

dilphinus

High Supremacy Member
Joined
Jun 17, 2002
Messages
29,640
Reaction score
3,488
cant believe u solo backpack russia...uzbekistan,
u cant even buy ur own bicycle!! :s13:

Says you I can't buy my own bicycle?

I was never a serious cyclist. Never saw the need to have my own bicycle when there's so many at home. I want a foldie now cos I'm planning a touring trip. But then, I don't even know when I can find time for the touring trip.
 
Status
Not open for further replies.
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top