Ask a Bicycle Question - Part 5

Status
Not open for further replies.

Akai Ryu

Arch-Supremacy Member
Joined
Dec 14, 2007
Messages
22,450
Reaction score
302
Mine is this one now. Go out jin xiasuay.

ffd78acd-4eff-4378-ac2b-d1c3b46c87c1-590456110.jpg


Sent from me to you using GAGT

Nothing wrong wirh using these. Good for PCN and pavement. Imo more for making self visible to pedestrian or other cyclist, not that useful on road. I use to use these till i noticed how it totally get washed out when my vehicle beam light shine directly at it and even less effective during day time. Day time should still use rear light if possible. Main factor for using these i guess its very affordable, stolen wont heartache. And very light of coz.

Changed to topeak mega 3.0, very bright But the running lights kindda gimicky So i sold it.

Tried the fibre flare....same problem with the cheap frog lights. Get washed out under street lamp even. Good in dark areas only...not on road

Now use orp for front and orfos for rear. Both cost alot esp orfos but at least my hunt for bike lights are over. For the next few yrs at least :o:o

Edited: too bright a light may become a hazard too when u end up blinding motorist or fellow cyclist. Get one which can adjust brightness level for day and night use if budget allows. For front light, tilt to road and not straight...may cause glare on driver mirror. Flashing or strobe mode good for alerting driver from a distant. Constant good for driver to judge distant when approaching. At the end of e day better to use any light than none, i use to hang L torch on my pants :o Some :ountries demand cyclist to have reflectors on their bike even if have lights.
 
Last edited:

Akai Ryu

Arch-Supremacy Member
Joined
Dec 14, 2007
Messages
22,450
Reaction score
302
Anyone did pro bike fit b4? Worth the $$$? Trying to find out whats the suitable handlebar width for me...did the push up test but still not sure.

Anyone put riser on ur mtb but nv go downhill? Any other reasons for having a riser bar?
 

DeadmanINC

Arch-Supremacy Member
Joined
Sep 26, 2007
Messages
16,640
Reaction score
373
I want to do also lol

Anyone did pro bike fit b4? Worth the $$$? Trying to find out whats the suitable handlebar width for me...did the push up test but still not sure.

Anyone put riser on ur mtb but nv go downhill? Any other reasons for having a riser bar?
 

DeadmanINC

Arch-Supremacy Member
Joined
Sep 26, 2007
Messages
16,640
Reaction score
373
Bike brand I am buying ish ceepo need to ask the lbs got do bo

i google to find that minimum 320 for 2 hrs...180 for quick fit...not much detail on what quick fit entails...scully standard saddle height check only
 

Akai Ryu

Arch-Supremacy Member
Joined
Dec 14, 2007
Messages
22,450
Reaction score
302
Bike brand I am buying ish ceepo need to ask the lbs got do bo

Oic...mb if u getting those super high end bikes? And if they have those indoor trainer

bike huas might have iirc but what brand u intending to get. Share your posion :D
 

Memphi5

Member
Joined
May 12, 2015
Messages
101
Reaction score
0
I went to my colleague's place to view the Tern C7s yesterday. Seems that 1 of them bike has kinetic comp rims. He assured me that it's upgradable to 10 speed in future if i want to and the rims that he is throwing in are not cheap. He will also throw in two rear lights and 2 saddle pouches as bonus. My gf and me test ride liao seems ok and bike condition looks ok, want to make a decision by this weekend. Shld i chiong for it?
 

DeadmanINC

Arch-Supremacy Member
Joined
Sep 26, 2007
Messages
16,640
Reaction score
373
Ceepo venom 2014 d2 and handlebar si buay poison

Oic...mb if u getting those super high end bikes? And if they have those indoor trainer

bike huas might have iirc but what brand u intending to get. Share your posion :D
 

erwinrommel

High Supremacy Member
Joined
Sep 30, 2007
Messages
27,904
Reaction score
3,157
I went to my colleague's place to view the Tern C7s yesterday. Seems that 1 of them bike has kinetic comp rims. He assured me that it's upgradable to 10 speed in future if i want to and the rims that he is throwing in are not cheap. He will also throw in two rear lights and 2 saddle pouches as bonus. My gf and me test ride liao seems ok and bike condition looks ok, want to make a decision by this weekend. Shld i chiong for it?

If its kinetix comp, then its ok. Yes, its not cheap but its not high end either. Its just a very normal double-walled rim wheelset made for Tern and Dahon. It can accommodate up to 9-10 speed with Schwalbe Durano tyres.

You tried C7 folding before? Its not as straightforward as other Tern folding (aka Tern N fold). The handlepost is adjustable but it is not as solid as the Tern Physis handlepost where its CNC machined out to form one single solid piece.
 

SmilingDevil

Senior Member
Joined
Jan 23, 2008
Messages
1,104
Reaction score
0
Anyone did pro bike fit b4? Worth the $$$? Trying to find out whats the suitable handlebar width for me...did the push up test but still not sure.

Anyone put riser on ur mtb but nv go downhill? Any other reasons for having a riser bar?

All I can say is 9 out of 10 of my customers end up changing out from the pro bike fit posture. Its pro but now every body can take the pro position.
Wat size t shirt do you wear? The size that fits your shoulder nicely would be the size, else just use a measuring tape to measure across shoulder from somewhere in the middle of your limbs
 

Akai Ryu

Arch-Supremacy Member
Joined
Dec 14, 2007
Messages
22,450
Reaction score
302
All I can say is 9 out of 10 of my customers end up changing out from the pro bike fit posture. Its pro but now every body can take the pro position.
Wat size t shirt do you wear? The size that fits your shoulder nicely would be the size, else just use a measuring tape to measure across shoulder from somewhere in the middle of your limbs

Thanks for the tip. Not aiming for pro standards. Will meaure tmr. Read abt some measurement guide using armpit too. I tweaking my saddle height for now...trying to prevent neck and lower bck ache fr prolong rides.

Using this guide at the moment. Noticed that when i set my saddle ht at optimal...my saddle ht would be abt an inch above handlebar. Trying to level and see if i dun put too much frontal force
102910saddlebars.jpg
 

SmilingDevil

Senior Member
Joined
Jan 23, 2008
Messages
1,104
Reaction score
0
Thanks for the tip. Not aiming for pro standards. Will meaure tmr. Read abt some measurement guide using armpit too. I tweaking my saddle height for now...trying to prevent neck and lower bck ache fr prolong rides.

Using this guide at the moment. Noticed that when i set my saddle ht at optimal...my saddle ht would be abt an inch above handlebar. Trying to level and see if i dun put too much frontal force
102910saddlebars.jpg

Errr.... ooops u talking about mtb? That one I have to ask my mechanic, he do mtb, I do roadie.
 

rarenick

High Supremacy Member
Joined
Jul 12, 2008
Messages
26,319
Reaction score
3,739
Something I don't quite understand. Many people use thin tyres to ride on sharp, uneven pavement as well as on roads with some stones at the left side. There are also many drain grilles that the wheels may drop in. Moreover most riders also never bring spare tubes. So is road bike and alikes really good for beginners?

Sent from Samsung SM-C115 using GAGT
 

albertchng

Arch-Supremacy Member
Joined
Jan 1, 2000
Messages
13,386
Reaction score
18
i google to find that minimum 320 for 2 hrs...180 for quick fit...not much detail on what quick fit entails...scully standard saddle height check only

Unless you have old injuries that prevent you to ride comfortably then a bike fitting is needed to correct your riding posture.

Usually bike fitting is done before you buy a bicycle not after, if after you have bought a bicycle it can be a very costly bike fitting. Give you an example... if the bike fitting report stated that your bike frame wrong size, your crank arm wrong length, stem wrong length, handlebar wrong width... etc. Will you change them?

The 2 more famous, independent and pro bike fitters in SG are Timothy from loue and Choon Wei from Fitskuul. If i remember correctly, they charge $450-500 for a session.
 

Akai Ryu

Arch-Supremacy Member
Joined
Dec 14, 2007
Messages
22,450
Reaction score
302
Unless you have old injuries that prevent you to ride comfortably then a bike fitting is needed to correct your riding posture.

Usually bike fitting is done before you buy a bicycle not after, if after you have bought a bicycle it can be a very costly bike fitting. Give you an example... if the bike fitting report stated that your bike frame wrong size, your crank arm wrong length, stem wrong length, handlebar wrong width... etc. Will you change them?

The 2 more famous, independent and pro bike fitters in SG are Timothy from loue and Choon Wei from Fitskuul. If i remember correctly, they charge $450-500 for a session.

mb have excuse to buy new bike riao :D
 

Akai Ryu

Arch-Supremacy Member
Joined
Dec 14, 2007
Messages
22,450
Reaction score
302
Something I don't quite understand. Many people use thin tyres to ride on sharp, uneven pavement as well as on roads with some stones at the left side. There are also many drain grilles that the wheels may drop in. Moreover most riders also never bring spare tubes. So is road bike and alikes really good for beginners?

Sent from Samsung SM-C115 using GAGT

My first learning bike a bmx follow by those retro steel rd bike with shifter on frame. Tried to "cycle cross" with it bck then but couldnt follow my mtb buddies on certain terrain...they moved on to "bicycle" with engines motorcross but got bck to cycling after giving up motorbikes for 4 wheels. most start with hardtail. The best bike are the bikes u ride often i guess
 

Sadisticnoob

High Supremacy Member
Joined
Jun 12, 2006
Messages
39,855
Reaction score
1,834
Thanks for the tip. Not aiming for pro standards. Will meaure tmr. Read abt some measurement guide using armpit too. I tweaking my saddle height for now...trying to prevent neck and lower bck ache fr prolong rides.

Using this guide at the moment. Noticed that when i set my saddle ht at optimal...my saddle ht would be abt an inch above handlebar. Trying to level and see if i dun put too much frontal force
102910saddlebars.jpg
I had static fit before for my road bike, but i didnt use it lol

K-ZERO-laterale.jpg
 
Status
Not open for further replies.
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top