Ask a Bicycle Question - Part 5

Status
Not open for further replies.

erwinrommel

High Supremacy Member
Joined
Sep 30, 2007
Messages
27,904
Reaction score
3,157
Time trial bike every 200km or so

road bike every 400-500km or so.

oil when i touch teh chain and it feels dry


alpine 8 is igh,

Pro
dont need maintainance (not that much )
the chain seems bigger and stronger

cons
if you need maintainance or system screw up youre gonna have a headache, the system is quite complicated
puncture time, the wheel will be hard to remove


this bike like dont have the hanger to attatch the deraileur

And not to mention IGH is heavy. The hub itself is already 1-1.2kg, and that excludes the number of spokes required to support it. I remember my 406 IGH wheelset weights about 1.8kg.

Once I change to a lighter wheelset, i really can fly...:o
 

Xiuzhi

Member
Joined
Oct 30, 2001
Messages
484
Reaction score
0
And not to mention IGH is heavy. The hub itself is already 1-1.2kg, and that excludes the number of spokes required to support it. I remember my 406 IGH wheelset weights about 1.8kg.
Once I change to a lighter wheelset, i really can fly...:o

Did the igh wheelset gave u any problems? I think weight is not a factor for me......just using it for leisure cycling....more concern about maintenence and reliability issues...
 

Akai Ryu

Arch-Supremacy Member
Joined
Dec 14, 2007
Messages
22,448
Reaction score
302
Electric to me irritates the hell out of ppl..Cos i will also feel irritated..Excessive ringing as well..

depends...i like bell for its simplicity but kindda useless on road.

using orp with their extension cable for combining bell with light sake
so far so good but has its drawback as well. Some pedestrian seem to be too accustom to traditional bell tone that when i use the friendly tone they look skyward :s13:

Silicone constructions means that there is light leakage from rider POV which may cause disruption to night vision. I tilt down more rather than shine directly ahead as it may blind motorist or fellow cyclist and cut an inner tube to wrap around the front of the light to protect my night vision.

More of a light for creating presence than lighting the pathway ahead at night. Keeping my torch strap still

Keeping my old school cateye bell still in case i no time charge orp :o

 

erwinrommel

High Supremacy Member
Joined
Sep 30, 2007
Messages
27,904
Reaction score
3,157
Even with heavy grip and resistance from the mtb tyres on normal roads and smaller crankset, still can go faster than foldie with thinner road tyres and larger crankset?

This is my humble observation and opinion. To make things simple, assume the gearing is the same.

If you are on a straight road and there's no need to slow down and accelerate (e.g. flat road, road with obstructions, people crossing etc), a high end MTB can win a fast and sleek foldie because of the rolling momentum (big wheels roll faster), comfort and stability (small potholes). It is difficult for a MTB to start from rest, especially at up slope. You see people on MTB sometimes have to stand up and peddle to move off.

But there will be much higher air resistance (bigger frame + wide tyres), rolling resistance (higher tyre deflection due to low tyre pressure==> increase in contact area on road==> more friction). You can literally hear a MTB rider coming behind you due to the amount of drag they have to overcome.

That's why there are people who convert their MTB to hybrid by changing to road bike gearing, sleeker wheelsets and narrower tyres to increase the speed.

Foldies generally are easier to start from rest because of lesser inertia. Sleek tyres meant lesser roller resistance, and the air resistance is generally lower. But it is difficult to maintain the momentum due to smaller wheels.

So in a nutshell, it depends on the type of terrain. For urban cycling, small wheels would have slightly more advantage due to numerous stopping.
 

erwinrommel

High Supremacy Member
Joined
Sep 30, 2007
Messages
27,904
Reaction score
3,157
Did the igh wheelset gave u any problems? I think weight is not a factor for me......just using it for leisure cycling....more concern about maintenence and reliability issues...

Nope.

IGB is pretty reliable... Literally tuning and maintenance free compared to derailleur system.

In IGB, you cann change the gear without peddling. So if lets say you were using a very high gear and then u did an emergency stop. So at stationary, you can change the gear without peddling and start off with a small gear.

For those on derailleur, the cyclist will have to stand on his pedals and move off as he cannot change gear while stationary.

But on long distances, derailleur is much efficient than IGB due to lesser weight involved and larger gear ratios.
 

erwinrommel

High Supremacy Member
Joined
Sep 30, 2007
Messages
27,904
Reaction score
3,157
if you want to measure in pure physics...... then the foldie has an advantage..... (lesser weight, lesser surface friction, lesser gearing friction, smaller frontal air resistance)

but humans are not machine, finding the most efficient cadence + torque for maximum power output better....

for myself, i prefer low cadence (30+rpm) with higher gear ratio and big wheels, if i ride foldie sure slow until cannot balance :s13:

anyway, 29ers wheels are big, my original knobbies measured
~34" diameter :s22:

Low cadence with high gear ratio... personally will avoid it cuz of knee pains.

Nowadays, I will always maintain cadence and then change gear accordingly based on terrain.
 
Status
Not open for further replies.
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top