Ask a Bicycle Question - Part 5

Status
Not open for further replies.

erwinrommel

High Supremacy Member
Joined
Sep 30, 2007
Messages
27,904
Reaction score
3,157
I give up on this one as the wheels too small. Looks dangerous to have good control.

Still looking around for single speed.

Sent from Samsung SM-C115 using GAGT

Tern Link Uno or Dahon mu uno...

Of course, if you want more blink blink... take a look at Tern Eclipse Uno.. known as the "Conjurer":

tn-photo-eclipse-uno_0.jpg
 

rarenick

High Supremacy Member
Joined
Jul 12, 2008
Messages
26,307
Reaction score
3,732
Curious why single speed?

Esp when speed and stability is a concern for you
Its for my wife. She prefer single speed which is less complicated. If wheels too small coupled with short handle bar and stem, she might not be able to control the bike as a novice. Then speed must not be too slow since I'm riding a mtb.

Sent from Samsung SM-C115 using GAGT
 

likehotbutter

Supremacy Member
Joined
Oct 20, 2010
Messages
5,798
Reaction score
819
Its for my wife. She prefer single speed which is less complicated. If wheels too small coupled with short handle bar and stem, she might not be able to control the bike as a novice. Then speed must not be too slow since I'm riding a mtb.

I see. But single speed difficult to control cadence le. If she goes on uphill then her pace will drop as she needs to power up instead of spinning If going fast will also outspin the gear? Normally ppl go SS for reasons like ease of maintainence and simplicity.

IMO better for her to go 1x10/11? At least playing with rear gears much simpler
 

ironsteel

Senior Member
Joined
Sep 23, 2010
Messages
1,575
Reaction score
0
My humble Tern Link P24H... But "zhng" too much stuffs...

16lh9vb.jpg


RD-- shimano ultegra 10 speed
FD-- shimano ultegra 2 speed
Shifters--- shimano R770 trigger
Crankset-- Shimano ultegra 53/39T 10 speed
Cassette/chain-- shimano tiagra 10 speed

451 wheelset-- Taobao custom made-- kinlin rim, Dati hub, DT champion spokes, Enduro bearings
Tyres-- Panaracer Minits Lite 7/8", pumped to 120 psi

Seatpost-- KCNC scandium
Saddle-- Rido R2
Grip-- Ergon GP5
Pedals-- Wellgo QRD-M111

Fitted with-- Tern luggage truss with Ortlieb mini bag (mounted in front via klickfix)
Do you think the ergon gp5 grips will work with the grip shifters on the p24h? I want to use the gp5 on mine too. Not sure if I can cut it myself or bring down to the shop and let them do it for me when I send my bike for servicing.

Incidentally, where do you send your bike for servicing?

Sent from QWERTY using GAGT
 
Status
Not open for further replies.
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top