Ask a Bicycle Question - Part 5

Status
Not open for further replies.

Sadisticnoob

High Supremacy Member
Joined
Jun 12, 2006
Messages
39,855
Reaction score
1,834
You bought the grips from lifecycle? I was planning buy online then get some bike shop to help me cut.

Do you know how much it costs to do a full servicing at C2C or Scootz? I heard scootz charges by face and not a fixed price. Was thinking about going down to bike culture since it's a flat rate of $70. Only thing is that the shop is damn far.

Where did you get the trigger shifters from? I looked on CRC but it's OOS. How much did you pay to change the set up?

Sent from QWERTY using GAGT
I normally do myself lol. think the costs used is around 10-15 sgd worth of solvents and lubricant around 1.5 hours
 

ironsteel

Senior Member
Joined
Sep 23, 2010
Messages
1,575
Reaction score
0
I think you just need GP4 at most, not a GP5. Not much space to play with if you like to mount a lot of gadgets on the handlebar like me.

Scootz charges depending on the type of servicing required by the owner. Yes, knowing them does help to bargain. ;) If you want, I can accompany you there and the mechanic maybe can give me some face. :D

I got my Alivio trigger shifters from Hup Leong, and they installed the rear shifter for me (8 speed). It should cost about $40+ inclusive of installation and tuning. The Neos RD can still be used.

Feel free to PM me if you need more info. Always willing to share whatever I know.

Thanks, will look for you when I plan to go down! Quite busy lately.

I must check the price difference between gp4 and 5. If the difference is very small, might as well get the better one :D If I get a chance to go by hup leong I will drop in and ask about the shifters too. But it's also very out of the way for me :(

Btw, do you know if it's possible to change the rear wheel to quick release? Takes a very long time for me to remove and put back the wheel whenever I clean my bike.

I normally do myself lol. think the costs used is around 10-15 sgd worth of solvents and lubricant around 1.5 hours

I usually do the minor things myself, but I want to strip the bike and replace a few things. I think the bike hasn't been serviced in a few years. And I just took it on a very dusty and sandy ride so just might as well service + clean at one shot :D
 

erwinrommel

High Supremacy Member
Joined
Sep 30, 2007
Messages
27,904
Reaction score
3,157
I must check the price difference between gp4 and 5. If the difference is very small, might as well get the better one :D If I get a chance to go by hup leong I will drop in and ask about the shifters too. But it's also very out of the way for me :(

Btw, do you know if it's possible to change the rear wheel to quick release? Takes a very long time for me to remove and put back the wheel whenever I clean my bike.

You can try asking Scootz amk too.

The sturmey archer hub don't have quick release option unless you totally remove the hub. I change to dérailleur setup.
 

Broadwalk

Great Supremacy Member
Joined
Apr 14, 2015
Messages
59,431
Reaction score
4,369
Too many backlog to clear by the admins. :s13:

But then you will be left out too even if accepted in. With no bike, how are you going to understand and participate in the discussions?

I am hoping by being accepted into discussion would spur and motivate me to get a bicycle soonest possible.:o
 

patcheon

Arch-Supremacy Member
Joined
Jun 21, 2004
Messages
12,339
Reaction score
5
do you guys usually cycle alone or wait till got kaki then cycle?

sometimes alone, sometimes with kaki, occasionally with edmw Sadistic, Jay Bee group.

If alone, I usually ride at my pace non stop till I get to where I want to go or completed my targeted route. With kaki, usually at a more relax pace, more talking and makan stops, with edmw group...usually pretty much pushing to my capabilities rides till end of session then go makan. All 3 quite difference experiences. :)
 

game goondu

Arch-Supremacy Member
Joined
Jan 1, 2000
Messages
18,581
Reaction score
1,550
hi, most of the bike come with no pedals.

i have never use a clipless for my mtb.

for a road bike, what is a good clipless pedals for newbie to use.
i would want one with a big platform as
1. i'm a total newbie for clipless, would want to wear normal sport shoes to familiar with the bike first.
2. when i more confident, then will try clipless.
3. not everytime want to wear clipless for short distance riding.
4. also prefer one that is easy to unclip.
 

Sadisticnoob

High Supremacy Member
Joined
Jun 12, 2006
Messages
39,855
Reaction score
1,834
hi, most of the bike come with no pedals.

i have never use a clipless for my mtb.

for a road bike, what is a good clipless pedals for newbie to use.
i would want one with a big platform as
1. i'm a total newbie for clipless, would want to wear normal sport shoes to familiar with the bike first.
2. when i more confident, then will try clipless.
3. not everytime want to wear clipless for short distance riding.
4. also prefer one that is easy to unclip.

try the a520 pedal from shimano

http://www.wiggle.co.uk/shimano-pd-a520-touring-pedals/
 

Sadisticnoob

High Supremacy Member
Joined
Jun 12, 2006
Messages
39,855
Reaction score
1,834
went for ride with my team today it was relatively slow! managed to hang on until the last 1.5km or so

13124213213_zpsaybrxvqr.png
 
Status
Not open for further replies.
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top