Aztech powerline socket help!!!

[zephyr11]

Hi there, I have the below connected.

1 x HL129EP
1 x HL115EP


They seem to be able to be paired. But there is no Internet activity light on, and I cannot get access thru the ethernet lan port.

Do they need to be same model to work? Or this should be OK? I got them separately.

Tried to reset them multiple times.

Could it be the singnet that is not working?

I am connected thru the WiFi, and the lan from the modem is working on the same singnet network.

Just the powerline lan doesn't seem to be working.

Need help!!!!

Thanks!

 

[wwenze]

You bought an Aztech product?

 

[localITguy]

You bought an Aztech product?

sir, please contak asstak

 

[localITguy]

Hi there, I have the below connected.

1 x HL129EP
1 x HL115EP


They seem to be able to be paired. But there is no Internet activity light on, and I cannot get access thru the ethernet lan port.

Do they need to be same model to work? Or this should be OK? I got them separately.

Tried to reset them multiple times.

Could it be the singnet that is not working?

I am connected thru the WiFi, and the lan from the modem is working on the same singnet network.

Just the powerline lan doesn't seem to be working.

Need help!!!!

Thanks!

clearly your homeplugs are not paired correctly
Download the Asstak tool/install it and set a custom private network name

https://www.aztech.com/country/singapore/categories/aztech-datacom/homeplug/hl129ep

Under the Private Network Name

ftp://ftp.aztech.com/support/SINGAPORE/HomePlug/HL110EW User Manual v1.0.pdf

go to 29 that will tell u how to set a private network correctly.

never use the Quick/Connect /Pair button on the HomePlugs, they are not secure and others can tap into your network !

 

[zephyr11]

wah, that bad ah?

 

[wwenze]

Show us how you connected, and can you ping the router

 

[zephyr11]

some pictures of what i did,

IMG_1030 by chewyicecube, on Flickr

IMG_1031 by chewyicecube, on Flickr


not exactly sure how to ping the modem, but this is what i got.



C:\Windows\system32>ipconfig

Windows IP Configuration


Ethernet adapter Ethernet:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::91cd:ceb3:4c0c:d3f2%4
Autoconfiguration IPv4 Address. . : 169.254.211.242
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter isatap.{12BA80AB-C5FA-4D60-943F-E33D6BFDF9AF}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

C:\Windows\system32>

 

[localITguy]

some pictures of what i did,

IMG_1030 by chewyicecube, on Flickr

IMG_1031 by chewyicecube, on Flickr


not exactly sure how to ping the modem, but this is what i got.



C:\Windows\system32>ipconfig

Windows IP Configuration


Ethernet adapter Ethernet:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::91cd:ceb3:4c0c:d3f2%4
Autoconfiguration IPv4 Address. . : 169.254.211.242
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter isatap.{12BA80AB-C5FA-4D60-943F-E33D6BFDF9AF}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

C:\Windows\system32>

refer my previous post

 

[zephyr11]

i pressed the simple connect on the main plug, hold for 10 sec, the lights all flashed. then go into the room to press the simple connect for 3 secs, then went back out to press the simple connect for 3 sec, the lights flashed, but couldn't connect.

tried several times.

 

[localITguy]

i pressed the simple connect on the main plug, hold for 10 sec, the lights all flashed. then go into the room to press the simple connect for 3 secs, then went back out to press the simple connect for 3 sec, the lights flashed, but couldn't connect.

tried several times.

READ again.

use the Tool to set the Network Name, do Not use the buttons

1. they are not secure
2. they don't always work
3. its not working because your block has other units unsing powerline also, and you might not be in the correct network. ( other unit's network)

 

[zephyr11]

refer my previous post

more noob qn;

they need to be plugged in with the ethernet cable to source (modem and to cpu). right?

 

[localITguy]

more noob qn;

they need to be plugged in with the ethernet cable to source (modem and to cpu). right?

1st homeplug plugs into your router

2nd homeplug plugs into your PC

 

[zephyr11]

i got this.

aztech by chewyicecube, on Flickr

 

[localITguy]

i got this.

aztech by chewyicecube, on Flickr

BRO!

Device ID is NOT YOUR NETWORK NAME

Look at the device ID at the back of the homeplug!

 

[localITguy]

aiya .

come i teach u

1. only connect Homeplug 1 to your PC ( Remove the Rest)
2. set the Network Name and hit Apply ( leave the box unchecked)
3. repeat step 1 and 2 for your 2nd HomePlug

 

[hlots123]

can he apply 1 at a time? eg apply network name to 1 homeplug 1st, then remove & bring the other homeplug here to apply same network name?
after both applied, then put back original location, test if connected?

 

[zephyr11]

sorry la very noob with these, lol...

ok ok, i try now.

 

[localITguy]

can he apply 1 at a time? eg apply network name to 1 homeplug 1st, then remove & bring the other homeplug here to apply same network name?

that is a simple way, he does not even know how to apply the homeplug remotely correctly


this is more easy for him bah

 

[localITguy]

sorry la very noob with these, lol...

ok ok, i try now.

no worries, apply 1 homeplug at a time and it should work

 

[hlots123]

oh i just saw u posted same thing earlier