Brother HL-L6200DW printer issue

encore888

Junior Member
Joined
Dec 16, 2021
Messages
16
Reaction score
1
Hello everyone, my new office comes with a printer, which prints but with lots of streaks and dirty patterns on the paper (see photo). Would replacing the drum fix this? Or it is possibly some other issue? Thanks for any advice!

 

wongminmin

High Supremacy Member
Joined
Nov 10, 2014
Messages
30,797
Reaction score
15,828
Assume u're not using pirated toner/expired toner

3 possibility
1. drum dirty.... clean the drum.
2. excess powder inside the toner..... shake the toner...to loose out the powder.
3. toner spoil.... buy new toner.
 

encore888

Junior Member
Joined
Dec 16, 2021
Messages
16
Reaction score
1
Thank you very much for the fast reply and the advice! I will look into those possibilities. (y)

Update: the toner was spoiled and it made the drum very very dirty. Replaced both.
 
Last edited:
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ. Forum members and moderators are responsible for their own posts.

Please refer to our Community Guidelines and Standards, Terms of Service and Member T&Cs for more information.
Top