just read review and cos lazada got sale, bought 2x corsair ml pro 120mm. good buy? will help?
It does help. ML fans is between SP (Static Pressure) and AF (Air Flow) fans.
I converted my entire case fans including my CPU AIO cooler fans to them. So 3 140mm and 2 120mm ML Pros.
The ML Pros are designed in a way that the 120mm fans have even more fan speed which beats even SP fans so it is much more perfect for CPU AIO Cooling while the 140mm fans are clearly meant to be used as case fans and they push a LOT of air unlike my previous fans.
Based on Asus motherboard's PWM Auto configuration, it did cool down my overall system MUCH lower than my previous fans did due to it having more speed and thus, better overall cooling. I saw a drastic drop in all areas of my motherboard including the CPU of at least 2 degrees Celsius at idle nearly matching my room temperature by 1 degree higher.
But I bought the fans for its quietness. So I set the fan speed at its lowest for the 140mm while increasing the temperature limit in which the fans will spin faster for my 120mm fans on the CPU.
By doing this, I have achieved a near silent PC configuration even when watching videos and yet achieving cooling performance that match my previous setup but is overall so much more quieter. Almost dead silent.
The sound it makes at startup is a
huge improvement over my previous fans where it sounded like a jet taking off. You'll know what I mean if you have an Asus motherboard and that initial fan blast it does at startup.
Due to it having a nice balance between SP and AF, expect it to not have sudden fan speed increase that the motherboard does when temperature increases because with the setup that I did, the CPU rarely increase in speed exponentially and thus, lesser fan blast. As for my GPU,
As you can see, once you go ML, it can suit whatever type of person you are. You can either choose a silent config that will have temperatures similar to my old fans' noisy fan speed or you can choose the auto config done by your motherboard and expect the temperature of the entire motherboard to drop to temperatures very close to room temperature which may keep your system running longer.
It's the best of both worlds. Plus, it will last longer since there is almost no friction. So you can expect your ML fans to be with you through many iterations of your PC build. Thumbs up for these!
PS. I do my 7 day temperature comparison using the CAM software.