Computer cannot turn on

[wadafuq]

Recently my comp always restart by itself when i use it, unfortunately yesterday my comp suddenly auto off and didnt restart back. When i press the power button i notice that the fan just spin for a sec only then stop. Mobo LED all still on but fan didnt spin. May i know whats the caused and how can i revive i back? Sorry for my poor explanation.

 

[wadafuq]

Need help urgently.

 

[hengheng220]

could be fan spoil... cannot cool down CPU efficiently thats why it shuts down

 

[zelda1031]

could be fan spoil... cannot cool down CPU efficiently thats why it shuts down

i also guess cpu fan spoil, over heat than restart ......... check if the fan is working or if the heatsink loose ?

 

[wadafuq]

I found out smth, when i only plug in the psu main connector to the mobo, the comp can on but will have 3 beeps. Stated error system halted and cmos checksum bad, freeze my keyboard too so i cant click anything. But when i plug in the main connector with the 4pin(which is seperated with the main connector which has many pinhole) the comp cant on at all. So is the connector faulty?

 

[ZawLee]

I found out smth, when i only plug in the psu main connector to the mobo, the comp can on but will have 3 beeps. Stated error system halted and cmos checksum bad, freeze my keyboard too so i cant click anything. But when i plug in the main connector with the 4pin(which is seperated with the main connector which has many pinhole) the comp cant on at all. So is the connector faulty?

3 beeps? your rams are the issues.

Take them out and do these steps so we can narrow down to the problem for you.

get a rubber and rub on the golden parts. be sure not to leave any dirt behind.
Put them back correctly.

If problems persists, time for RMA.

 

[wadafuq]

3 beeps? your rams are the issues.

Take them out and do these steps so we can narrow down to the problem for you.

get a rubber and rub on the golden parts. be sure not to leave any dirt behind.
Put them back correctly.

If problems persists, time for RMA.

Done, still same cant turn on. I think the 4pinhole connector faulty. Cus if i never plug in to the mobo, the comp can on but with error. If i plug in the comp cant on at all.

 

[hengheng220]

if can borrow psu testing lo. com restart usually is overheat or psu got problem. GPU issues usually quite obvious de...

 

[wadafuq]

if can borrow psu testing lo. com restart usually is overheat or psu got problem. GPU issues usually quite obvious de...

Will borrow psu tmr thanks for the help guys. Will update aft i borrowed psu tmr.

 

[jtjt00]

If changing PSU still no go, it is time to bring to GS:
http://forums.hardwarezone.com.sg/hardware-clinic-2/new-setup-corner-all-diy-hardwarezoner-%5E-%5E-3581022.html